[PATCH v2 01/10] arm: mvebu: fix SerDes table alignment

[Joel Johnson]

Tested on Solidrun ClearFog Base. Table alignment was:
 | Lane #  | Speed |  Type       |
 --------------------------------
 |   0    |  3   |  SATA0       |
 |   1    |  0   |  SGMII1      |
 |   2    |  3   |  SATA1       |
 |   3    |  5   |  USB3 HOST1  |
 |   4    |  5   |  USB3 HOST0  |
 |   5    |  4   |  SGMII2      |
 --------------------------------

After the change, it's correctly aligned as:
 | Lane # | Speed |  Type       |
 --------------------------------
 |   0    |   3   | SATA0       |
 |   1    |   0   | SGMII1      |
 |   2    |   5   | PCIe1       |
 |   3    |   5   | USB3 HOST1  |
 |   4    |   5   | PCIe2       |
 |   5    |   0   | SGMII2      |
 --------------------------------

Signed-off-by: Joel Johnson <mrjoel at lixil.net>

---

v2 changes
  - none

---
 arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
index 33e70569bc..66409a50c0 100644
--- a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
+++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
@@ -1366,16 +1366,16 @@ static void print_topology_details(const struct serdes_map *serdes_map,
 
 	DEBUG_INIT_S("board SerDes lanes topology details:\n");
 
-	DEBUG_INIT_S(" | Lane #  | Speed |  Type       |\n");
+	DEBUG_INIT_S(" | Lane # | Speed |  Type       |\n");
 	DEBUG_INIT_S(" --------------------------------\n");
 	for (lane_num = 0; lane_num < count; lane_num++) {
 		if (serdes_map[lane_num].serdes_type == DEFAULT_SERDES)
 			continue;
 		DEBUG_INIT_S(" |   ");
 		DEBUG_INIT_D(hws_get_physical_serdes_num(lane_num), 1);
-		DEBUG_INIT_S("    |  ");
+		DEBUG_INIT_S("    |   ");
 		DEBUG_INIT_D(serdes_map[lane_num].serdes_speed, 2);
-		DEBUG_INIT_S("   |  ");
+		DEBUG_INIT_S("   | ");
 		DEBUG_INIT_S((char *)
 			     serdes_type_to_string[serdes_map[lane_num].
 						   serdes_type]);
-- 
2.20.1