[U-Boot] [PATCH] arm: zynq: zybo z7: fix SPL uart init bitrate

Luis Araneda luaraneda at gmail.com
Mon Jan 20 02:32:19 CET 2020


From: Milan Obuch <u-boot at dino.sk>

The board uses 100 MHz clock for UART bitrate generator,
but is configured as 50 MHz on defconfig.

This produces wrong console output.
The first message, "Debug uart enabled" is received as:
"������b"

Fix the issue by configuring the correct clock for the
UART baudrate generator

Signed-off-by: Milan Obuch <u-boot at dino.sk>
Signed-off-by: Luis Araneda <luaraneda at gmail.com>
---

This changes were originally sent by Milan Obuch using a diff format.
As he didn't know how to properly send git patches to the mailing list,
I converted them to a git commit, rephrased the commit message and added
the Signed-off-by tags.

Milan Obuch then review and approved the current state of the patch.

Tested on a zybo z7-20 board by me

 configs/zynq_zybo_z7_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/configs/zynq_zybo_z7_defconfig b/configs/zynq_zybo_z7_defconfig
index 7129e2b5f3..f41d6574f7 100644
--- a/configs/zynq_zybo_z7_defconfig
+++ b/configs/zynq_zybo_z7_defconfig
@@ -5,7 +5,7 @@ CONFIG_SYS_TEXT_BASE=0x4000000
 CONFIG_SPL_STACK_R_ADDR=0x200000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xe0001000
-CONFIG_DEBUG_UART_CLOCK=50000000
+CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SYS_CUSTOM_LDSCRIPT=y
-- 
2.25.0



More information about the U-Boot mailing list