[U-Boot] [PATCH] arm: zynq: zybo z7: fix MIO init issue

[Luis Araneda]

From: Milan Obuch <u-boot at dino.sk>

The board has two push button connected to MIO pins
50 and 51, which have a pull-down resistor and are
connected to 1.8V when pressed.

These two pins are wrongly initialized with internal
pull-up enabled so they are reported as 1 all the time
with no change when pressed.

Disable the internal pull-up to fix the issue.

Signed-off-by: Milan Obuch <u-boot at dino.sk>
Signed-off-by: Luis Araneda <luaraneda at gmail.com>
---

This changes were originally sent by Milan Obuch using a diff format.
As he didn't know how to properly send git patches to the mailing list,
I converted them to a git commit, rephrased the commit message and added
the Signed-off-by tags.

Milan Obuch then review and approved the current state of the patch.

Tested on a zybo z7-20 board by me

 board/xilinx/zynq/zynq-zybo-z7/ps7_init_gpl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/xilinx/zynq/zynq-zybo-z7/ps7_init_gpl.c b/board/xilinx/zynq/zynq-zybo-z7/ps7_init_gpl.c
index 7c6bc9fa3f..a376ba574e 100644
--- a/board/xilinx/zynq/zynq-zybo-z7/ps7_init_gpl.c
+++ b/board/xilinx/zynq/zynq-zybo-z7/ps7_init_gpl.c
@@ -219,8 +219,8 @@ static unsigned long ps7_mio_init_data_3_0[] = {
 	EMIT_MASKWRITE(0xF80007BC, 0x00003F01U, 0x00001201U),
 	EMIT_MASKWRITE(0xF80007C0, 0x00003FFFU, 0x000012E0U),
 	EMIT_MASKWRITE(0xF80007C4, 0x00003FFFU, 0x000012E1U),
-	EMIT_MASKWRITE(0xF80007C8, 0x00003FFFU, 0x00001200U),
-	EMIT_MASKWRITE(0xF80007CC, 0x00003FFFU, 0x00001200U),
+	EMIT_MASKWRITE(0xF80007C8, 0x00003FFFU, 0x00000200U),
+	EMIT_MASKWRITE(0xF80007CC, 0x00003FFFU, 0x00000200U),
 	EMIT_MASKWRITE(0xF80007D0, 0x00003FFFU, 0x00001280U),
 	EMIT_MASKWRITE(0xF80007D4, 0x00003FFFU, 0x00001280U),
 	EMIT_MASKWRITE(0xF8000830, 0x003F003FU, 0x002F0037U),
-- 
2.25.0