[PATCH 2/4] gpio: cortina_gpio: add DM_GPIO driver for CAxxxx SoCs

Alex Nemirovsky Alex.Nemirovsky at cortina-access.com
Mon Jan 20 10:53:38 CET 2020


From: Jason Li <jason.li at cortina-access.com>

DM_GPIO based GPIO controller driver for CAxxxx SoCs.
This driver support multiple CPU architectures and
Cortina Access SoC platforms.

Signed-off-by: Jason Li <jason.li at cortina-access.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky at cortina-access.com>
---

 MAINTAINERS                 |   2 +
 drivers/gpio/Kconfig        |   8 ++++
 drivers/gpio/Makefile       |   1 +
 drivers/gpio/cortina_gpio.c | 113 ++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 124 insertions(+)
 create mode 100644 drivers/gpio/cortina_gpio.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 02b2e11..b7b3359 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -179,6 +179,7 @@ S:	Supported
 F:	board/cortina/common/*
 F:	board/cortina/common/Kconfig
 F:	board/cortina/common/armv8/lowlevel_init.S
+F:	drivers/gpio/cortina_gpio.c
 
 ARM/CZ.NIC TURRIS MOX SUPPORT
 M:	Marek Behun <marek.behun at nic.cz>
@@ -660,6 +661,7 @@ S:	Supported
 F:	board/cortina/common/*
 F:	board/cortina/common/Kconfig
 F:	board/cortina/common/mips/*
+F:	drivers/gpio/cortina_gpio.c
 
 MIPS MSCC
 M:	Gregory CLEMENT <gregory.clement at bootlin.com>
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 1de6f52..8a7aa5a 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -59,6 +59,14 @@ config BCM6345_GPIO
 	help
 	  This driver supports the GPIO banks on BCM6345 SoCs.
 
+config CORTINA_GPIO
+	bool "Cortina-Access GPIO driver"
+	depends on DM_GPIO && CORTINA_PLATFORM
+	help
+	  Enable support for the GPIO controller in Cortina CAxxxx SoCs.
+	  This driver supports all CPU ISA variants supported by Cortina
+	  Access CAxxxx SoCs.
+
 config DWAPB_GPIO
 	bool "DWAPB GPIO driver"
 	depends on DM && DM_GPIO
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 449046b..ceae612 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -17,6 +17,7 @@ endif
 obj-$(CONFIG_AT91_GPIO)	+= at91_gpio.o
 obj-$(CONFIG_ATMEL_PIO4)	+= atmel_pio4.o
 obj-$(CONFIG_BCM6345_GPIO)	+= bcm6345_gpio.o
+obj-$(CONFIG_CORTINA_GPIO)      += cortina_gpio.o
 obj-$(CONFIG_INTEL_GPIO)	+= intel_gpio.o
 obj-$(CONFIG_INTEL_ICH6_GPIO)	+= intel_ich6_gpio.o
 obj-$(CONFIG_INTEL_BROADWELL_GPIO)	+= intel_broadwell_gpio.o
diff --git a/drivers/gpio/cortina_gpio.c b/drivers/gpio/cortina_gpio.c
new file mode 100644
index 0000000..370d475
--- /dev/null
+++ b/drivers/gpio/cortina_gpio.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Copyright (C) 2020 Cortina-Access
+ * Author: Jason Li <Jason.Li at cortina-access.com>
+ *
+ * GPIO Driver for Cortina Access CAxxxx Line of SoCs
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <linux/compat.h>
+#include <linux/compiler.h>
+
+/* GPIO Register Map */
+#define CORTINA_GPIO_CFG	0x00
+#define CORTINA_GPIO_OUT	0x04
+#define CORTINA_GPIO_IN		0x08
+#define CORTINA_GPIO_LVL	0x0C
+#define CORTINA_GPIO_EDGE	0x10
+#define CORTINA_GPIO_BOTHEDGE	0x14
+#define CORTINA_GPIO_IE		0x18
+#define CORTINA_GPIO_INT	0x1C
+#define CORTINA_GPIO_STAT	0x20
+
+struct cortina_gpio_bank {
+	void __iomem *base;
+};
+
+#ifdef CONFIG_DM_GPIO
+static int ca_gpio_direction_input(struct udevice *dev, unsigned int offset)
+{
+	struct cortina_gpio_bank *priv = dev_get_priv(dev);
+
+	setbits_32(priv->base, BIT(offset));
+	return 0;
+}
+
+static int
+ca_gpio_direction_output(struct udevice *dev, unsigned int offset, int value)
+{
+	struct cortina_gpio_bank *priv = dev_get_priv(dev);
+
+	clrbits_32(priv->base, BIT(offset));
+	return 0;
+}
+
+static int ca_gpio_get_value(struct udevice *dev, unsigned int offset)
+{
+	struct cortina_gpio_bank *priv = dev_get_priv(dev);
+
+	return readl(priv->base + CORTINA_GPIO_IN) & BIT(offset);
+}
+
+static int ca_gpio_set_value(struct udevice *dev, unsigned int offset,
+			     int value)
+{
+	struct cortina_gpio_bank *priv = dev_get_priv(dev);
+
+	setbits_32(priv->base + CORTINA_GPIO_OUT, BIT(offset));
+	return 0;
+}
+
+static int ca_gpio_get_function(struct udevice *dev, unsigned int offset)
+{
+	struct cortina_gpio_bank *priv = dev_get_priv(dev);
+
+	if (readl(priv->base) & BIT(offset))
+		return GPIOF_INPUT;
+	else
+		return GPIOF_OUTPUT;
+}
+
+static const struct dm_gpio_ops gpio_cortina_ops = {
+	.direction_input = ca_gpio_direction_input,
+	.direction_output = ca_gpio_direction_output,
+	.get_value = ca_gpio_get_value,
+	.set_value = ca_gpio_set_value,
+	.get_function = ca_gpio_get_function,
+};
+
+static int ca_gpio_probe(struct udevice *dev)
+{
+	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+	struct cortina_gpio_bank *priv = dev_get_priv(dev);
+
+	priv->base = dev_remap_addr_index(dev, 0);
+	if (!priv->base)
+		return -EINVAL;
+
+	uc_priv->gpio_count = dev_read_u32_default(dev, "ngpios", 32);
+	uc_priv->bank_name = dev->name;
+
+	printf("Done Cortina GPIO init\n");
+	return 0;
+}
+
+static const struct udevice_id ca_gpio_ids[] = {
+	{.compatible = "cortina,cortina-gpio"},
+	{}
+};
+
+U_BOOT_DRIVER(cortina_gpio) = {
+	.name = "cortina-gpio",
+	.id = UCLASS_GPIO,
+	.ops = &gpio_cortina_ops,
+	.probe = ca_gpio_probe,
+	.priv_auto_alloc_size = sizeof(struct cortina_gpio_bank),
+	.of_match = ca_gpio_ids,
+};
+#endif /* CONFIG_DM_GPIO */
-- 
2.7.4



More information about the U-Boot mailing list