[PATCH 2/3] mx7dsabre: Enable DM_ETH

[Fabio Estevam]

Hi Joris,

Has this patch been tested on the real hardware?

This is what we currently see:

U-Boot 2020.01-00620-g2d2f91a480 (Jan 20 2020 - 15:41:31 -0300)

CPU:   Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz)
CPU:   Commercial temperature grade (0C to 95C) at 35C
Reset cause: POR
Model: Freescale i.MX7 SabreSD Board
Board: i.MX7D SABRESD in secure mode
DRAM:  1 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
Video: 480x272x24
In:    serial
Out:   serial
Err:   serial
Net:   Could not get PHY for FEC0: addr 0
No ethernet found.

So Ethernet is not functional at all.

Do you plan to fix Ethernet on this board?

On Sun, Dec 8, 2019 at 2:02 PM Joris Offouga <offougajoris at gmail.com> wrote:
>
> Also sync device tree with v5.5-rc1
> Signed-off-by: Joris Offouga <offougajoris at gmail.com>
> ---
>  arch/arm/dts/imx7d-sdb-u-boot.dtsi        |   3 +
>  arch/arm/dts/imx7d-sdb.dts                | 785 ++++++++++++++++------

Also, not happy that the dts sync was part of the same commit that
converted to DM_ETH.

Thanks