[PATCH v3 08/20] mips: add a mtmips-specific field to architecture-specific global data

[Stefan Roese]

On 21.01.20 09:18, Weijie Gao wrote:
> SoCs of mtmips can use different CPU frequencies depending on the HW/SW
> configurations. For example mt7628 uses 580MHz clock if the input xtal
> frequency is 40MHz, and 575MHz clock if the xtal is 25MHz. Upon cold boot
> the CPU uses the xtal frequency directly.
> 
> So hardcoding the timer frequency (half of the CPU frequency) in
> CONFIG_SYS_MIPS_TIMER_FREQ is not a good idea for this case.
> 
> This patch adds a mtmips-specific field timer_freq to arch_global_data.
> This field will be used later in mtmips-specific get_tbclk() to provide
> accurate timer frequency in different boot stage.
> 
> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
> Signed-off-by: Weijie Gao <weijie.gao at mediatek.com>
> ---
> Changes since v2: none

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan