[U-Boot] [PATCH V3 2/2] core: device: use dev_power_domain_on

[Oliver Graute]

On 16/12/19, Igor Opaniuk wrote:
> Hi Oliver, Fabio, Peng,
> 
> On Thu, Dec 12, 2019 at 9:20 AM Oliver Graute
> <oliver.graute at kococonnector.com> wrote:
> >
> > On 11/12/19, Fabio Estevam wrote:
> > > Hi Oliver,
> > >
> > > On Tue, Dec 10, 2019 at 11:50 PM Peng Fan <peng.fan at nxp.com> wrote:
> > >
> > > > Update your scfw/atf and they try again.
> > >
> > > Does it boot if you use the imx_4.19.35_1.0.0 ATF branch?
> >
> > Unfortunately, not. I checked out imx-atf in that branch. Build it with:
> >
> > make PLAT=imx8qm bl31
> >
> > copied the resulting bl31.bin into my u-boot folder and rebuild that.
> >
> > But the imx8qm board is not booting with the resulting u-boot.
> >
> > do I need a new scfw from my vendor?
> >
> > Best Regards,
> >
> > Oliver
> 
> FYI,
> 
> I do face the same boot issues on colibri-imx8qxp_defconfig ,
> In my case using imx_4.19.35_1.0.0 TF-A(ATF) doesn't help too.
> 
> Bi-secting also points to this commit.

Did you made some progress here?

I tried this combination but without success for the imx8qm_rom_7720:

u-boot 2020.01
imx-atf imx_4.19.35_1.1.0
imx-sc-firmware-1.2.7.1.bin
imx-seco-2.3.1.bin

Which latest combination is vaild for the imx8qm_mek board?

Best Regards,

Oliver