imx8qxp mek: Booting mainline kernel with mainline U-Boot

[Fabio Estevam]

Hi Peng,

On Tue, Jan 14, 2020 at 4:01 PM Fabio Estevam <festevam at gmail.com> wrote:
>
> Hi Peng,
>
> On Mon, Jan 13, 2020 at 10:08 PM Fabio Estevam <festevam at gmail.com> wrote:
> >
> > Hi Peng,
> >
> > On Mon, Jan 13, 2020 at 9:46 PM Peng Fan <peng.fan at nxp.com> wrote:
> >
> > > I have not try that. Aisheng has some Linux patches pending  which are
> > > restructuring the Linux side SCU 8QXP/QM code, so I not put efforts
> > > on booting mainline kernel.
> >
> > Even NXP kernel failed booting for me.
>
> Are you able to boot NXP kernel with mainline U-Boot? If so, which version?
>
> With Anatolij's suggestion I get the same hang (during LPUART driver
> probe) in mainline as well as with NXP 4.19.35 kernel.
>
> Please see the log:
> http://code.bulix.org/fm8ye7-1088212
>
> What needs to be fixed to allow mainline U-Boot to boot a kernel on imx8qxp mek?

Any comments? It would be very helpful if mainline U-Boot could be
used to boot a kernel on i.MX8QXP MEK :-)