[PATCH 2/2] armv8: ls2088a: Updates secure boot headers offset
Priyanka Singh
priyanka.singh at nxp.com
Wed Jan 22 11:32:38 CET 2020
Updates the secure boot headers offsets of Kernel and other
firmware images for SD and NOR boot sources used by
esbc_validate command.
Signed-off-by: Priyanka Singh <priyanka.singh at nxp.com>
---
include/configs/ls2080aqds.h | 12 ++++-----
include/configs/ls2080ardb.h | 52 ++++++++++++++++++------------------
2 files changed, 32 insertions(+), 32 deletions(-)
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index e2a897557d..f71bf95978 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * Copyright 2017, 2019 NXP
+ * Copyright 2017, 2019-2020 NXP
* Copyright 2015 Freescale Semiconductor
*/
@@ -365,8 +365,8 @@ unsigned long get_board_ddr_clk(void);
"kernel_load=0xa0000000\0" \
"kernel_size=0x2800000\0" \
"mcmemsize=0x40000000\0" \
- "mcinitcmd=esbc_validate 0x580700000;" \
- "esbc_validate 0x580740000;" \
+ "mcinitcmd=esbc_validate 0x580640000;" \
+ "esbc_validate 0x580680000;" \
"fsl_mc start mc 0x580a00000" \
" 0x580e00000 \0"
#else
@@ -394,7 +394,7 @@ unsigned long get_board_ddr_clk(void);
"kernel_size=0x2800000\0" \
"kernel_size_sd=0x14000\0" \
"load_addr=0xa0000000\0" \
- "kernelheader_addr=0x580800000\0" \
+ "kernelheader_addr=0x580600000\0" \
"kernelheader_addr_r=0x80200000\0" \
"kernelheader_size=0x40000\0" \
"BOARD=ls2088aqds\0" \
@@ -447,7 +447,7 @@ unsigned long get_board_ddr_clk(void);
#ifdef CONFIG_TFABOOT
#define SD_BOOTCOMMAND \
"env exists mcinitcmd && env exists secureboot "\
- "&& mmcinfo && mmc read $load_addr 0x3c00 0x800 " \
+ "&& mmcinfo && mmc read $load_addr 0x3600 0x800 " \
"&& esbc_validate $load_addr; " \
"env exists mcinitcmd && run mcinitcmd " \
"&& mmc read 0x80d00000 0x6800 0x800 " \
@@ -457,7 +457,7 @@ unsigned long get_board_ddr_clk(void);
#define IFC_NOR_BOOTCOMMAND \
"env exists mcinitcmd && env exists secureboot "\
- "&& esbc_validate 0x580780000; env exists mcinitcmd "\
+ "&& esbc_validate 0x5806C0000; env exists mcinitcmd "\
"&& fsl_mc lazyapply dpl 0x580d00000;" \
"run nor_bootcmd; " \
"env exists secureboot && esbc_halt;"
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index ee9b3484dd..6be1ac95c3 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * Copyright 2017, 2019 NXP
+ * Copyright 2017, 2019-2020 NXP
* Copyright 2015 Freescale Semiconductor
*/
@@ -340,46 +340,46 @@ unsigned long get_board_sys_clk(void);
#ifdef CONFIG_TFABOOT
#define QSPI_MC_INIT_CMD \
"env exists secureboot && " \
- "esbc_validate 0x20700000 && " \
- "esbc_validate 0x20740000;" \
+ "esbc_validate 0x20640000 && " \
+ "esbc_validate 0x20680000;" \
"fsl_mc start mc 0x20a00000 0x20e00000 \0"
#define SD_MC_INIT_CMD \
"mmcinfo;mmc read 0x80a00000 0x5000 0x1200;" \
"mmc read 0x80e00000 0x7000 0x800;" \
"env exists secureboot && " \
- "mmc read 0x80700000 0x3800 0x20 && " \
- "mmc read 0x80740000 0x3A00 0x20 && " \
- "esbc_validate 0x80700000 && " \
- "esbc_validate 0x80740000 ;" \
+ "mmc read 0x80640000 0x3200 0x20 && " \
+ "mmc read 0x80680000 0x3400 0x20 && " \
+ "esbc_validate 0x80640000 && " \
+ "esbc_validate 0x80680000 ;" \
"fsl_mc start mc 0x80a00000 0x80e00000\0"
#define IFC_MC_INIT_CMD \
"env exists secureboot && " \
- "esbc_validate 0x580700000 && " \
- "esbc_validate 0x580740000; " \
+ "esbc_validate 0x580640000 && " \
+ "esbc_validate 0x580680000; " \
"fsl_mc start mc 0x580a00000 0x580e00000 \0"
#else
#ifdef CONFIG_QSPI_BOOT
#define MC_INIT_CMD \
"mcinitcmd=env exists secureboot && " \
- "esbc_validate 0x20700000 && " \
- "esbc_validate 0x20740000;" \
+ "esbc_validate 0x20640000 && " \
+ "esbc_validate 0x20680000;" \
"fsl_mc start mc 0x20a00000 0x20e00000 \0"
#elif defined(CONFIG_SD_BOOT)
#define MC_INIT_CMD \
"mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \
"mmc read 0x80100000 0x7000 0x800;" \
"env exists secureboot && " \
- "mmc read 0x80700000 0x3800 0x20 && " \
- "mmc read 0x80740000 0x3A00 0x20 && " \
- "esbc_validate 0x80700000 && " \
- "esbc_validate 0x80740000 ;" \
+ "mmc read 0x80640000 0x3200 0x20 && " \
+ "mmc read 0x80680000 0x3400 0x20 && " \
+ "esbc_validate 0x80640000 && " \
+ "esbc_validate 0x80680000 ;" \
"fsl_mc start mc 0x80000000 0x80100000\0" \
"mcmemsize=0x70000000\0"
#else
#define MC_INIT_CMD \
"mcinitcmd=env exists secureboot && " \
- "esbc_validate 0x580700000 && " \
- "esbc_validate 0x580740000; " \
+ "esbc_validate 0x580640000 && " \
+ "esbc_validate 0x580680000; " \
"fsl_mc start mc 0x580a00000 0x580e00000 \0"
#endif
#endif
@@ -401,7 +401,7 @@ unsigned long get_board_sys_clk(void);
"scripthdraddr=0x80080000\0" \
"fdtheader_addr_r=0x80100000\0" \
"kernelheader_addr_r=0x80200000\0" \
- "kernelheader_addr=0x580800000\0" \
+ "kernelheader_addr=0x580600000\0" \
"kernel_addr_r=0x81000000\0" \
"kernelheader_size=0x40000\0" \
"fdt_addr_r=0x90000000\0" \
@@ -459,12 +459,12 @@ unsigned long get_board_sys_clk(void);
"fdt_addr=0x64f00000\0" \
"kernel_addr=0x581000000\0" \
"kernel_start=0x1000000\0" \
- "kernelheader_start=0x800000\0" \
+ "kernelheader_start=0x600000\0" \
"scriptaddr=0x80000000\0" \
"scripthdraddr=0x80080000\0" \
"fdtheader_addr_r=0x80100000\0" \
"kernelheader_addr_r=0x80200000\0" \
- "kernelheader_addr=0x580800000\0" \
+ "kernelheader_addr=0x580600000\0" \
"kernel_addr_r=0x81000000\0" \
"kernelheader_size=0x40000\0" \
"fdt_addr_r=0x90000000\0" \
@@ -518,7 +518,7 @@ unsigned long get_board_sys_clk(void);
#ifdef CONFIG_TFABOOT
#define QSPI_NOR_BOOTCOMMAND \
"env exists mcinitcmd && env exists secureboot "\
- "&& esbc_validate 0x20780000; " \
+ "&& esbc_validate 0x206C0000; " \
"env exists mcinitcmd && " \
"fsl_mc lazyapply dpl 0x20d00000; " \
"run distro_bootcmd;run qspi_bootcmd; " \
@@ -527,7 +527,7 @@ unsigned long get_board_sys_clk(void);
/* Try to boot an on-SD kernel first, then do normal distro boot */
#define SD_BOOTCOMMAND \
"env exists mcinitcmd && env exists secureboot "\
- "&& mmcinfo && mmc read $load_addr 0x3c00 0x800 " \
+ "&& mmcinfo && mmc read $load_addr 0x3600 0x800 " \
"&& esbc_validate $load_addr; " \
"env exists mcinitcmd && run mcinitcmd " \
"&& mmc read 0x80d00000 0x6800 0x800 " \
@@ -538,7 +538,7 @@ unsigned long get_board_sys_clk(void);
/* Try to boot an on-NOR kernel first, then do normal distro boot */
#define IFC_NOR_BOOTCOMMAND \
"env exists mcinitcmd && env exists secureboot "\
- "&& esbc_validate 0x580780000; env exists mcinitcmd "\
+ "&& esbc_validate 0x5806C0000; env exists mcinitcmd "\
"&& fsl_mc lazyapply dpl 0x580d00000;" \
"run distro_bootcmd;run nor_bootcmd; " \
"env exists secureboot && esbc_halt;"
@@ -548,7 +548,7 @@ unsigned long get_board_sys_clk(void);
/* Try to boot an on-QSPI kernel first, then do normal distro boot */
#define CONFIG_BOOTCOMMAND \
"env exists mcinitcmd && env exists secureboot "\
- "&& esbc_validate 0x20780000; " \
+ "&& esbc_validate 0x206C0000; " \
"env exists mcinitcmd && " \
"fsl_mc lazyapply dpl 0x20d00000; " \
"run distro_bootcmd;run qspi_bootcmd; " \
@@ -557,7 +557,7 @@ unsigned long get_board_sys_clk(void);
/* Try to boot an on-SD kernel first, then do normal distro boot */
#define CONFIG_BOOTCOMMAND \
"env exists mcinitcmd && env exists secureboot "\
- "&& mmcinfo && mmc read $load_addr 0x3c00 0x800 " \
+ "&& mmcinfo && mmc read $load_addr 0x3600 0x800 " \
"&& esbc_validate $load_addr; " \
"env exists mcinitcmd && run mcinitcmd " \
"&& mmc read 0x88000000 0x6800 0x800 " \
@@ -568,7 +568,7 @@ unsigned long get_board_sys_clk(void);
/* Try to boot an on-NOR kernel first, then do normal distro boot */
#define CONFIG_BOOTCOMMAND \
"env exists mcinitcmd && env exists secureboot "\
- "&& esbc_validate 0x580780000; env exists mcinitcmd "\
+ "&& esbc_validate 0x5806C0000; env exists mcinitcmd "\
"&& fsl_mc lazyapply dpl 0x580d00000;" \
"run distro_bootcmd;run nor_bootcmd; " \
"env exists secureboot && esbc_halt;"
--
2.17.1
More information about the U-Boot
mailing list