[U-Boot Patch v1 3/7] fu540: dtsi: spi: add num-cs info to dt

[Sagar Shrikant Kadam]

Add number of chip select information to spi nodes which
can be used by spi-uclass for error handling if invlaid cs
number passed from command.

Signed-off-by: Sagar Shrikant Kadam <sagar.kadam at sifive.com>
---
 arch/riscv/dts/fu540-c000.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/riscv/dts/fu540-c000.dtsi b/arch/riscv/dts/fu540-c000.dtsi
index afa43c7..9c6ab21 100644
--- a/arch/riscv/dts/fu540-c000.dtsi
+++ b/arch/riscv/dts/fu540-c000.dtsi
@@ -191,6 +191,7 @@
 			clocks = <&prci PRCI_CLK_TLCLK>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			num-cs = <1>;
 			status = "disabled";
 		};
 		qspi1: spi at 10041000 {
@@ -202,6 +203,7 @@
 			clocks = <&prci PRCI_CLK_TLCLK>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			num-cs = <1>;
 			status = "disabled";
 		};
 		qspi2: spi at 10050000 {
@@ -212,6 +214,7 @@
 			clocks = <&prci PRCI_CLK_TLCLK>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			num-cs = <1>;
 			status = "disabled";
 		};
 		eth0: ethernet at 10090000 {
-- 
2.7.4