[PATCH 0/4] sunxi: R40: Enable USB and Ethernet

[Jagan Teki]

On Thu, Jan 2, 2020 at 5:15 AM Andre Przywara <andre.przywara at arm.com> wrote:
>
> This series enables the USB ports on boards with the Allwinner R40 SoC,
> also updates the Bananapi M2 Berry board support.
> Patch 1/4 updates the M2 Berry .dts file, so that we get the USB and
> Ethernet nodes that we need to enable Ethernet in patch 2/4.
> Patch 3/4 adds support for the USB PHY in the R40 SoC, so that the final
> patch can enable USB for the two R40 boards that U-Boot supports.
>
> Tested on the Bananapi M2 Berry. I don't have the M2 Ultra, but USB
> should work there with this series too. Ethernet was already enabled.
>
> Cheers,
> Andre.
>
> Andre Przywara (4):
>   sunxi: dts: R40: Update Bananapi M2 Berry .dts
>   sunxi: defconfig: Bananapi M2 Berry: enable Ethernet
>   phy: sun4i-usb: Add Allwinner R40 support
>   sunxi: defconfig: R40 boards: enable USB
>
>  arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts | 135 ++++++++++++++++++++++++---
>  arch/arm/mach-sunxi/Kconfig                  |   1 +
>  configs/Bananapi_M2_Ultra_defconfig          |   4 +
>  configs/bananapi_m2_berry_defconfig          |   6 ++
>  drivers/phy/allwinner/phy-sun4i-usb.c        |  12 +++
>  5 files changed, 143 insertions(+), 15 deletions(-)

Applied all to u-boot-sunxi/master