[PATCH v1 0/5] arm: xea: Enhancements for i.MX28 based XEA board

Lukasz Majewski lukma at denx.de
Sat Jan 25 09:01:35 CET 2020


This patch set provides some enhancements for i.MX28 based XEA board.
The most notably one is the ethaddr setup for L2 switch based design and
the code to very early enable fec regulator.


Lukasz Majewski (5):
  arm: xea: defconfig: Define space for redundant envs in SPI-NOR flash
  arm: xea: Provide function to set L2 switch 'local-mac-address'
    property
  arm: xea: config: Enable support for XEA board specific device tree
    tweaks
  arm: xea: spl: Add GPIO0_0 setup on spl_board_init
  arm: xea: dts: Add 'fec-3v3' regulator properties to prevent
    accidental disablement

 arch/arm/dts/imx28-xea.dts  |  2 ++
 board/liebherr/xea/xea.c    | 49 ++++++++++++++++++++++++++++++++++++-
 configs/imx28_xea_defconfig |  3 +++
 3 files changed, 53 insertions(+), 1 deletion(-)

-- 
2.20.1



More information about the U-Boot mailing list