[PATCH v4 09/12] arm: mvebu: clearfog: move ENV params to Kconfig

[Joel Johnson]

Migrate the values for ENV_SIZE and ENV_OFFSET into board specific
Kconfig defaults so they're more accessible for configuration.

---

v2 changes:
  - none
v3 changes:
  - none
v4 changes:
  - none

Signed-off-by: Joel Johnson <mrjoel at lixil.net>
---
 board/solidrun/clearfog/Kconfig | 8 ++++++++
 configs/clearfog_defconfig      | 2 --
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/board/solidrun/clearfog/Kconfig b/board/solidrun/clearfog/Kconfig
index d3209d9b8e..fbaeed1a4f 100644
--- a/board/solidrun/clearfog/Kconfig
+++ b/board/solidrun/clearfog/Kconfig
@@ -22,6 +22,14 @@ config CLEARFOG_SFP_25GB
 	  SGMII connection (requires a supporting SFP). By default, transfer speed
 	  of 1.25 Gbps is used, suitable for a more common 1 Gbps SFP module.
 
+config ENV_SIZE
+	hex "Environment Size"
+	default 0x10000
+
+config ENV_OFFSET
+	hex "Environment offset"
+	default 0xF0000
+
 config ENV_SECT_SIZE
 	hex "Environment Sector-Size"
 	# Use SPI flash erase block size of 4 KiB
diff --git a/configs/clearfog_defconfig b/configs/clearfog_defconfig
index c938448c30..6db8b8acf6 100644
--- a/configs/clearfog_defconfig
+++ b/configs/clearfog_defconfig
@@ -9,8 +9,6 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_CLEARFOG=y
 CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC=y
-CONFIG_ENV_SIZE=0x10000
-CONFIG_ENV_OFFSET=0xF0000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
-- 
2.20.1