[PATCH 009/108] x86: apl: Move p2sb ofdata reading to the correct method

[Simon Glass]

With P2SB the initial BAR (base-address register) is set up by TPL and
this is used unchanged right through U-Boot.

At present the reading of this address is split between the ofdata() and
probe() methods. There are a few problems that are unique to the p2sb.
One is that its children need to call pcr_read32(), etc. which needs to
have the p2sb address correct. Also some of its children are pinctrl
devices and pinctrl is used when any device is probed. So p2sb really
needs to get its base address set up in ofdata_to_platdata(), before it is
probed.

Another point is that reading the p2sb BAR will not work if the p2sb is
hidden. The FSP-S seems to hide it, presumably to avoid confusing PCI
enumeration.

Reading ofdata in ofdata_to_platdata() is the correct place anyway, so
this is easy to fix.

Move the code into one place and use the early-regs property in all cases
for simplicity and to avoid needing to probe any PCI devices just to read
the BAR.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 arch/x86/cpu/apollolake/p2sb.c | 33 +++++++++++----------------------
 1 file changed, 11 insertions(+), 22 deletions(-)

diff --git a/arch/x86/cpu/apollolake/p2sb.c b/arch/x86/cpu/apollolake/p2sb.c
index 7b5a473bbd..a3d8e094e7 100644
--- a/arch/x86/cpu/apollolake/p2sb.c
+++ b/arch/x86/cpu/apollolake/p2sb.c
@@ -92,27 +92,25 @@ int apl_p2sb_ofdata_to_platdata(struct udevice *dev)
 
 #if !CONFIG_IS_ENABLED(OF_PLATDATA)
 	int ret;
+	u32 base[2];
 
+	ret = dev_read_u32_array(dev, "early-regs", base, ARRAY_SIZE(base));
+	if (ret)
+		return log_msg_ret("Missing/short early-regs", ret);
+	plat->mmio_base = base[0];
+	/* TPL sets up the initial BAR */
 	if (spl_phase() == PHASE_TPL) {
-		u32 base[2];
-
-		/* TPL sets up the initial BAR */
-		ret = dev_read_u32_array(dev, "early-regs", base,
-					 ARRAY_SIZE(base));
-		if (ret)
-			return log_msg_ret("Missing/short early-regs", ret);
-		plat->mmio_base = base[0];
 		plat->bdf = pci_get_devfn(dev);
 		if (plat->bdf < 0)
 			return log_msg_ret("Cannot get p2sb PCI address",
-					   plat->bdf);
+						plat->bdf);
 	}
+	upriv->mmio_base = plat->mmio_base;
 #else
 	plat->mmio_base = plat->dtplat.early_regs[0];
 	plat->bdf = pci_ofplat_get_devfn(plat->dtplat.reg[0]);
-#endif
 	upriv->mmio_base = plat->mmio_base;
-	debug("p2sb: mmio_base=%x\n", (uint)plat->mmio_base);
+#endif
 
 	return 0;
 }
@@ -121,17 +119,8 @@ static int apl_p2sb_probe(struct udevice *dev)
 {
 	if (spl_phase() == PHASE_TPL)
 		return apl_p2sb_early_init(dev);
-	else {
-		struct p2sb_platdata *plat = dev_get_platdata(dev);
-
-		plat->mmio_base = dev_read_addr_pci(dev);
-		/* Don't set BDF since it should not be used */
-		if (!plat->mmio_base || plat->mmio_base == FDT_ADDR_T_NONE)
-			return -EINVAL;
-
-		if (spl_phase() == PHASE_SPL)
-			return apl_p2sb_spl_init(dev);
-	}
+	else if (spl_phase() == PHASE_SPL)
+		return apl_p2sb_spl_init(dev);
 
 	return 0;
 }
-- 
2.25.0.341.g760bfbb309-goog