[PATCH 054/108] x86: gpio: Add support for obtaining ACPI info for a GPIO

[Simon Glass]

Implement the method that converts a GPIO into the form used by ACPI, so
that GPIOs can be added to ACPI tables.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 drivers/gpio/intel_gpio.c | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/drivers/gpio/intel_gpio.c b/drivers/gpio/intel_gpio.c
index c56b362c4e..51ea23df89 100644
--- a/drivers/gpio/intel_gpio.c
+++ b/drivers/gpio/intel_gpio.c
@@ -4,6 +4,7 @@
  */
 
 #include <common.h>
+#include <acpi_device.h>
 #include <dm.h>
 #include <errno.h>
 #include <fdtdec.h>
@@ -127,6 +128,33 @@ static int intel_gpio_xlate(struct udevice *orig_dev, struct gpio_desc *desc,
 	return 0;
 }
 
+#if CONFIG_IS_ENABLED(ACPIGEN)
+static int intel_gpio_get_acpi(const struct gpio_desc *desc,
+			       struct acpi_gpio *gpio)
+{
+	struct udevice *pinctrl;
+	int ret;
+
+	if (!dm_gpio_is_valid(desc))
+		return -ENOENT;
+	pinctrl = dev_get_parent(desc->dev);
+
+	memset(gpio, '\0', sizeof(*gpio));
+
+	gpio->type = ACPI_GPIO_TYPE_IO;
+	gpio->pull = ACPI_GPIO_PULL_DEFAULT;
+	gpio->io_restrict = ACPI_GPIO_IO_RESTRICT_OUTPUT;
+	gpio->polarity = ACPI_GPIO_ACTIVE_HIGH;
+	gpio->pin_count = 1;
+	gpio->pins[0] = intel_pinctrl_get_acpi_pin(pinctrl, desc->offset);
+	ret = acpi_device_path(pinctrl, gpio->resource, sizeof(gpio->resource));
+	if (ret)
+		return log_msg_ret("resource", ret);
+
+	return 0;
+}
+#endif
+
 static int intel_gpio_probe(struct udevice *dev)
 {
 	return 0;
@@ -151,6 +179,9 @@ static const struct dm_gpio_ops gpio_intel_ops = {
 	.set_value		= intel_gpio_set_value,
 	.get_function		= intel_gpio_get_function,
 	.xlate			= intel_gpio_xlate,
+#if CONFIG_IS_ENABLED(ACPIGEN)
+	.get_acpi		= intel_gpio_get_acpi,
+#endif
 };
 
 static const struct udevice_id intel_intel_gpio_ids[] = {
-- 
2.25.0.341.g760bfbb309-goog