[PATCH] rockchip: px30: remove CONFIG_OPTEE support

[Heiko Stuebner]

Hi Kever,

Am Dienstag, 7. Januar 2020, 09:59:39 CET schrieb Kever Yang:
> Rockchip use CONFIG_SPL_OPTEE for OPTEE support, which is load and run
> before U-Boot, but not use CONFIG_OPTEE which is after U-Boot.
> 
> Signed-off-by: Kever Yang <kever.yang at rock-chips.com>

I see you applied this to the Rockchip custodian tree and I would
like to ask you to revert that.

SPL_OPTEE is only useful on boards that want to jump directly into
OPTEE from SPL, like the rk3228 currently does.

CONFIG_OPTEE on the other hand enables the functionality to claim
the correct regions of ram in the kernel DT.

When OPTEE loads it will reserve its memory regions as "reserved-memory"
but of course only in the DT provided through the SPL. So when U-Boot
loads a kernel+separate DT it will not know about them and may access them.

The functionality provided by CONFIG_OPTEE will transfer the reserved
areas from the SPL-DT to the kernel-DT to make sure we don't run into
security exceptions later on.

So please reenable CONFIG_OPTEE for px30

Thanks
Heiko


> ---
> 
>  configs/evb-px30_defconfig     | 1 -
>  configs/firefly-px30_defconfig | 1 -
>  2 files changed, 2 deletions(-)
> 
> diff --git a/configs/evb-px30_defconfig b/configs/evb-px30_defconfig
> index d83cc6f4db..912ea95223 100644
> --- a/configs/evb-px30_defconfig
> +++ b/configs/evb-px30_defconfig
> @@ -90,7 +90,6 @@ CONFIG_DEBUG_UART_SHIFT=2
>  CONFIG_DEBUG_UART_SKIP_INIT=y
>  CONFIG_SOUND=y
>  CONFIG_SYSRESET=y
> -CONFIG_OPTEE=y
>  CONFIG_DM_THERMAL=y
>  CONFIG_USB=y
>  CONFIG_USB_EHCI_HCD=y
> diff --git a/configs/firefly-px30_defconfig b/configs/firefly-px30_defconfig
> index e24f1cf8c8..2bfe9e6fc6 100644
> --- a/configs/firefly-px30_defconfig
> +++ b/configs/firefly-px30_defconfig
> @@ -95,7 +95,6 @@ CONFIG_DEBUG_UART_SHIFT=2
>  CONFIG_DEBUG_UART_SKIP_INIT=y
>  CONFIG_SOUND=y
>  CONFIG_SYSRESET=y
> -CONFIG_OPTEE=y
>  CONFIG_DM_THERMAL=y
>  CONFIG_USB=y
>  CONFIG_USB_EHCI_HCD=y
>