[PATCH v5 10/12] arm: mvebu: clearfog: move ENV params to Kconfig
Joel Johnson
mrjoel at lixil.net
Mon Jan 27 21:01:54 CET 2020
Migrate the values for ENV_SIZE and ENV_OFFSET into board specific
Kconfig defaults so they're more accessible for configuration.
---
v2 changes:
- none
v3 changes:
- none
v4 changes:
- none
v5 changes:
- none
Signed-off-by: Joel Johnson <mrjoel at lixil.net>
---
board/solidrun/clearfog/Kconfig | 8 ++++++++
configs/clearfog_defconfig | 2 --
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/board/solidrun/clearfog/Kconfig b/board/solidrun/clearfog/Kconfig
index ea9c419472..e8c3f53d84 100644
--- a/board/solidrun/clearfog/Kconfig
+++ b/board/solidrun/clearfog/Kconfig
@@ -39,6 +39,14 @@ config CLEARFOG_SFP_25GB
SGMII connection (requires a supporting SFP). By default, transfer speed
of 1.25 Gbps is used, suitable for a more common 1 Gbps SFP module.
+config ENV_SIZE
+ hex "Environment Size"
+ default 0x10000
+
+config ENV_OFFSET
+ hex "Environment offset"
+ default 0xF0000
+
config ENV_SECT_SIZE
hex "Environment Sector-Size"
# Use SPI flash erase block size of 4 KiB
diff --git a/configs/clearfog_defconfig b/configs/clearfog_defconfig
index c938448c30..6db8b8acf6 100644
--- a/configs/clearfog_defconfig
+++ b/configs/clearfog_defconfig
@@ -9,8 +9,6 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_CLEARFOG=y
CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC=y
-CONFIG_ENV_SIZE=0x10000
-CONFIG_ENV_OFFSET=0xF0000
CONFIG_DM_GPIO=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
--
2.20.1
More information about the U-Boot
mailing list