[PATCH 3/9] ARM: dts: stm32mp1: DT alignment with kernel v5.5-rc7
Patrick Delaunay
patrick.delaunay at st.com
Tue Jan 28 10:11:00 CET 2020
Device tree and binding alignment with kernel v5.5-rc7
Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
---
arch/arm/dts/stm32mp157-pinctrl.dtsi | 23 ++++++++-
arch/arm/dts/stm32mp157a-avenger96.dts | 3 +-
arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 17 -------
arch/arm/dts/stm32mp157a-dk1.dts | 65 +++++++++++++++++++++---
arch/arm/dts/stm32mp157c-dk2.dts | 13 +++++
arch/arm/dts/stm32mp157c-ed1.dts | 20 ++++++--
arch/arm/dts/stm32mp157c-ev1.dts | 3 --
7 files changed, 112 insertions(+), 32 deletions(-)
diff --git a/arch/arm/dts/stm32mp157-pinctrl.dtsi b/arch/arm/dts/stm32mp157-pinctrl.dtsi
index 07cd0809ff..81a363d93d 100644
--- a/arch/arm/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp157-pinctrl.dtsi
@@ -138,7 +138,16 @@
status = "disabled";
};
- adc12_usb_pwr_pins_a: adc12-usb-pwr-pins-0 {
+ adc12_ain_pins_a: adc12-ain-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */
+ <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
+ <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */
+ <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */
+ };
+ };
+
+ adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 {
pins {
pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */
<STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */
@@ -175,6 +184,18 @@
};
};
+ dac_ch1_pins_a: dac-ch1 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 4, ANALOG)>;
+ };
+ };
+
+ dac_ch2_pins_a: dac-ch2 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 5, ANALOG)>;
+ };
+ };
+
dcmi_pins_a: dcmi-0 {
pins {
pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */
diff --git a/arch/arm/dts/stm32mp157a-avenger96.dts b/arch/arm/dts/stm32mp157a-avenger96.dts
index 232fe70905..3065593bf2 100644
--- a/arch/arm/dts/stm32mp157a-avenger96.dts
+++ b/arch/arm/dts/stm32mp157a-avenger96.dts
@@ -252,14 +252,13 @@
regulator-name = "vbus_otg";
interrupts = <IT_OCP_OTG 0>;
interrupt-parent = <&pmic>;
- regulator-active-discharge;
};
vbus_sw: pwr_sw2 {
regulator-name = "vbus_sw";
interrupts = <IT_OCP_SWOUT 0>;
interrupt-parent = <&pmic>;
- regulator-active-discharge;
+ regulator-active-discharge = <1>;
};
};
diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
index dcaab3eef2..4045a6e731 100644
--- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
@@ -35,24 +35,7 @@
};
&adc {
- pinctrl-names = "default";
- pinctrl-0 = <&adc12_usb_pwr_pins_a>;
- vdd-supply = <&vdd>;
- vdda-supply = <&vdd>;
- vref-supply = <&vrefbuf>;
status = "okay";
- adc1: adc at 0 {
- /*
- * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
- * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
- * 5 * (56 + 47kOhms) * 5pF => 2.5us.
- * Use arbitrary margin here (e.g. 5µs).
- */
- st,min-sample-time-nsecs = <5000>;
- /* ANA0, ANA1, USB Type-C CC1 & CC2 */
- st,adc-channels = <0 1 18 19>;
- status = "okay";
- };
};
&clk_hse {
diff --git a/arch/arm/dts/stm32mp157a-dk1.dts b/arch/arm/dts/stm32mp157a-dk1.dts
index dc61bfc3d5..624bf6954b 100644
--- a/arch/arm/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/dts/stm32mp157a-dk1.dts
@@ -25,6 +25,7 @@
};
memory at c0000000 {
+ device_type = "memory";
reg = <0xc0000000 0x20000000>;
};
@@ -92,7 +93,34 @@
"Playback" , "MCLK",
"Capture" , "MCLK",
"MICL" , "Mic Bias";
- dais = <&sai2a_port &sai2b_port>;
+ dais = <&sai2a_port &sai2b_port &i2s2_port>;
+ status = "okay";
+ };
+};
+
+&adc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>;
+ vdd-supply = <&vdd>;
+ vdda-supply = <&vdd>;
+ vref-supply = <&vrefbuf>;
+ status = "disabled";
+ adc1: adc at 0 {
+ /*
+ * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
+ * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
+ * 5 * (56 + 47kOhms) * 5pF => 2.5us.
+ * Use arbitrary margin here (e.g. 5us).
+ */
+ st,min-sample-time-nsecs = <5000>;
+ /* AIN connector, USB Type-C CC1 & CC2 */
+ st,adc-channels = <0 1 6 13 18 19>;
+ status = "okay";
+ };
+ adc2: adc at 100 {
+ /* AIN connector, USB Type-C CC1 & CC2 */
+ st,adc-channels = <0 1 2 6 18 19>;
+ st,min-sample-time-nsecs = <5000>;
status = "okay";
};
};
@@ -146,9 +174,7 @@
reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
interrupt-parent = <&gpiog>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <<dc_pins_a>;
- pinctrl-1 = <<dc_pins_sleep_a>;
+ #sound-dai-cells = <0>;
status = "okay";
ports {
@@ -161,6 +187,13 @@
remote-endpoint = <<dc_ep0_out>;
};
};
+
+ port at 3 {
+ reg = <3>;
+ sii9022_tx_endpoint: endpoint {
+ remote-endpoint = <&i2s2_endpoint>;
+ };
+ };
};
};
@@ -244,7 +277,7 @@
vddcore: buck1 {
regulator-name = "vddcore";
- regulator-min-microvolt = <800000>;
+ regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-initial-mode = <0>;
@@ -345,7 +378,7 @@
vbus_sw: pwr_sw2 {
regulator-name = "vbus_sw";
interrupts = <IT_OCP_SWOUT 0>;
- regulator-active-discharge;
+ regulator-active-discharge = <1>;
};
};
@@ -364,6 +397,23 @@
};
};
+&i2s2 {
+ clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+ clock-names = "pclk", "i2sclk", "x8k", "x11k";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2s2_pins_a>;
+ pinctrl-1 = <&i2s2_pins_sleep_a>;
+ status = "okay";
+
+ i2s2_port: port {
+ i2s2_endpoint: endpoint {
+ remote-endpoint = <&sii9022_tx_endpoint>;
+ format = "i2s";
+ mclk-fs = <256>;
+ };
+ };
+};
+
&ipcc {
status = "okay";
};
@@ -374,6 +424,9 @@
};
<dc {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <<dc_pins_a>;
+ pinctrl-1 = <<dc_pins_sleep_a>;
status = "okay";
port {
diff --git a/arch/arm/dts/stm32mp157c-dk2.dts b/arch/arm/dts/stm32mp157c-dk2.dts
index 020ea0f0e2..d26adcbeba 100644
--- a/arch/arm/dts/stm32mp157c-dk2.dts
+++ b/arch/arm/dts/stm32mp157c-dk2.dts
@@ -53,6 +53,19 @@
};
};
+&i2c1 {
+ touchscreen at 38 {
+ compatible = "focaltech,ft6236";
+ reg = <0x38>;
+ interrupts = <2 2>;
+ interrupt-parent = <&gpiof>;
+ interrupt-controller;
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <800>;
+ status = "okay";
+ };
+};
+
<dc {
status = "okay";
diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts
index acb59f24cc..ae4da39ce8 100644
--- a/arch/arm/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/dts/stm32mp157c-ed1.dts
@@ -84,7 +84,21 @@
gpios = <&gpiof 14 GPIO_ACTIVE_HIGH>;
gpios-states = <0>;
- states = <1800000 0x1 2900000 0x0>;
+ states = <1800000 0x1>,
+ <2900000 0x0>;
+ };
+};
+
+&dac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
+ vref-supply = <&vdda>;
+ status = "disabled";
+ dac1: dac at 1 {
+ status = "okay";
+ };
+ dac2: dac at 2 {
+ status = "okay";
};
};
@@ -127,7 +141,7 @@
vddcore: buck1 {
regulator-name = "vddcore";
- regulator-min-microvolt = <800000>;
+ regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-initial-mode = <0>;
@@ -225,7 +239,7 @@
vbus_sw: pwr_sw2 {
regulator-name = "vbus_sw";
interrupts = <IT_OCP_SWOUT 0>;
- regulator-active-discharge;
+ regulator-active-discharge = <1>;
};
};
diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts
index aa5892b156..bd8ffc185f 100644
--- a/arch/arm/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/dts/stm32mp157c-ev1.dts
@@ -32,7 +32,6 @@
joystick {
compatible = "gpio-keys";
- #size-cells = <0>;
pinctrl-0 = <&joystick_pins>;
pinctrl-names = "default";
button-0 {
@@ -343,14 +342,12 @@
&usbh_ehci {
phys = <&usbphyc_port0>;
- phy-names = "usb";
status = "okay";
};
&usbotg_hs {
dr_mode = "peripheral";
phys = <&usbphyc_port1 0>;
- phy-names = "usb2-phy";
status = "okay";
};
--
2.17.1
More information about the U-Boot
mailing list