[PATCH] usb: gadget: Handle SPL_* configs

[Lukasz Majewski]

On Tue, 28 Jan 2020 17:50:03 +1000
Nathan Rossi <nathan at nathanrossi.com> wrote:

> On Mon, 27 Jan 2020 at 22:51, Lukasz Majewski <lukma at denx.de> wrote:
> >
> > Hi Nathan,
> >  
> > > Handle selection of objects based on $(SPL_) to allow for normal
> > > and SPL builds to have differing object compilation.  
> >
> > Could you share the exact use case? I do guess that you want to add
> > some gadget(s) to SPL?  
> 
> I am primarily trying to disable SPL_ENV_SUPPORT for beaglebone
> (am335x_evm). SPL_USB_ETHER has a dependency on SPL_ENV_SUPPORT, thus
> the desire to disable it (whilst leaving SPL_USB_GADGET enabled).

Ok.

> 
> >
> > (Such changes may cause issues on boards already using this feature
> > - could you run:
> >
> > ./tools/buildman/buildman.py --branch=HEAD siemens samsung bbb
> > --detail --verbose --show_errors --force-build --count=1
> > --output-dir=./BUILD/  
> 
> Running this showed no regressions. Also I noticed "bbb" does not
> refer to any boards?

I see. Then please try am335x instead.

> 
> Thanks,
> Nathan
> 
> >
> >
> >  
> > >
> > > Signed-off-by: Nathan Rossi <nathan at nathanrossi.com>
> > > ---
> > >  drivers/usb/gadget/Makefile | 8 ++++----
> > >  1 file changed, 4 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/usb/gadget/Makefile
> > > b/drivers/usb/gadget/Makefile index 70f3bf43e7..8967745513 100644
> > > --- a/drivers/usb/gadget/Makefile
> > > +++ b/drivers/usb/gadget/Makefile
> > > @@ -3,8 +3,8 @@
> > >  # (C) Copyright 2000-2007
> > >  # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> > >
> > > -obj-$(CONFIG_USB_GADGET) += epautoconf.o config.o usbstring.o
> > > -obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o usbstring.o
> > > +obj-$(CONFIG_$(SPL_)USB_GADGET) += epautoconf.o config.o
> > > usbstring.o +obj-$(CONFIG_$(SPL_)USB_ETHER) += epautoconf.o
> > > config.o usbstring.o
> > >
> > >  ifdef CONFIG_SPL_BUILD
> > >  obj-$(CONFIG_SPL_USB_GADGET) += g_dnl.o
> > > @@ -13,7 +13,7 @@ obj-$(CONFIG_SPL_USB_SDP_SUPPORT) += f_sdp.o
> > >  endif
> > >
> > >  # new USB gadget layer dependencies
> > > -ifdef CONFIG_USB_GADGET
> > > +ifdef CONFIG_$(SPL_)USB_GADGET
> > >  obj-$(CONFIG_USB_GADGET_AT91) += at91_udc.o
> > >  obj-$(CONFIG_USB_GADGET_ATMEL_USBA) += atmel_usba_udc.o
> > >  obj-$(CONFIG_USB_GADGET_BCM_UDC_OTG_PHY) += bcm_udc_otg_phy.o
> > > @@ -31,7 +31,7 @@ obj-$(CONFIG_USB_FUNCTION_SDP) += f_sdp.o
> > >  obj-$(CONFIG_USB_FUNCTION_ROCKUSB) += f_rockusb.o
> > >  endif
> > >  endif
> > > -ifdef CONFIG_USB_ETHER
> > > +ifdef CONFIG_$(SPL_)USB_ETHER
> > >  obj-y += ether.o
> > >  obj-$(CONFIG_USB_ETH_RNDIS) += rndis.o
> > >  obj-$(CONFIG_CI_UDC) += ci_udc.o
> > > ---
> > > 2.24.1  
> >
> >
> >
> >
> > Best regards,
> >
> > Lukasz Majewski
> >
> > --
> >
> > DENX Software Engineering GmbH,      Managing Director: Wolfgang
> > Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
> > Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
> > lukma at denx.de  




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200128/df514f9c/attachment.sig>