[PATCH 1/2] arm: mvebu: clearfog: add SCSI to distro bootcmd

[Joel Johnson]

Include attempting to boot from SCSI (SATA) devices within generated
board distro bootcmd environment. The reasoning for boot ordering is
that MMC and USB are external and removable, while when a case is in
use, replacing M.2 or mSATA drives requires disassembly. Therefore,
to boot SCSI, [bootable] external media must be removed. If SCSI were
placed before MMC or USB, then removing a bootable SCSI drive to
enable MMC or USB booting would be more difficult.

Signed-off-by: Joel Johnson <mrjoel at lixil.net>

---

 include/configs/clearfog.h | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h
index 633187d86f..a452f4b009 100644
--- a/include/configs/clearfog.h
+++ b/include/configs/clearfog.h
@@ -110,9 +110,16 @@
 #define BOOT_TARGET_DEVICES_USB(func)
 #endif
 
+#ifdef CONFIG_SCSI
+#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
+#else
+#define BOOT_TARGET_DEVICES_SCSI(func)
+#endif
+
 #define BOOT_TARGET_DEVICES(func) \
 	BOOT_TARGET_DEVICES_MMC(func) \
 	BOOT_TARGET_DEVICES_USB(func) \
+	BOOT_TARGET_DEVICES_SCSI(func) \
 	func(PXE, pxe, na) \
 	func(DHCP, dhcp, na)
 
-- 
2.20.1