[PATCH 2/4] ARM: dts: rockchip: Sync rk3288-vyasa dts from linux
Kever Yang
kever.yang at rock-chips.com
Thu Jan 30 04:55:45 CET 2020
On 2020/1/23 下午10:12, Jagan Teki wrote:
> Sync rk3288-vyasa dts file from Linux.
>
> This sync has changes required to work HDMI output on
> Vyasa RK3288 board.
>
> This sync excludes the io_domains node since it is not
> available in rk3288.dtsi.
>
> Changes like vcc50_hdmi, vdd10_lcd and ddc-i2c-bus are
> not merged to Linux yet but wil resync later if any
> further updates on this.
>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
Thanks,
- Kever
> ---
> arch/arm/dts/rk3288-vyasa.dts | 79 ++++++++++++++---------------------
> 1 file changed, 32 insertions(+), 47 deletions(-)
>
> diff --git a/arch/arm/dts/rk3288-vyasa.dts b/arch/arm/dts/rk3288-vyasa.dts
> index 850aa25818..4193f7208c 100644
> --- a/arch/arm/dts/rk3288-vyasa.dts
> +++ b/arch/arm/dts/rk3288-vyasa.dts
> @@ -1,43 +1,6 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> /*
> * Copyright (C) 2017 Jagan Teki <jagan at amarulasolutions.com>
> - *
> - * This file is dual-licensed: you can use it either under the terms
> - * of the GPL or the X11 license, at your option. Note that this dual
> - * licensing only applies to this file, and not this project as a
> - * whole.
> - *
> - * a) This file is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of the
> - * License, or (at your option) any later version.
> - *
> - * This file is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * Or, alternatively,
> - *
> - * b) Permission is hereby granted, free of charge, to any person
> - * obtaining a copy of this software and associated documentation
> - * files (the "Software"), to deal in the Software without
> - * restriction, including without limitation the rights to use,
> - * copy, modify, merge, publish, distribute, sublicense, and/or
> - * sell copies of the Software, and to permit persons to whom the
> - * Software is furnished to do so, subject to the following
> - * conditions:
> - *
> - * The above copyright notice and this permission notice shall be
> - * included in all copies or substantial portions of the Software.
> - *
> - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> - * OTHER DEALINGS IN THE SOFTWARE.
> */
>
> /dts-v1/;
> @@ -115,6 +78,17 @@
> vin-supply = <&vcc_io>;
> };
>
> + vcc50_hdmi: vcc50-hdmi {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc50_hdmi";
> + enable-active-high;
> + gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>; /* HDMI_EN */
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc50_hdmi_en>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vsus_5v>;
> + };
> vusb1_5v: vusb1-5v {
> compatible = "regulator-fixed";
> regulator-name = "vusb1_5v";
> @@ -158,7 +132,6 @@
> &emmc {
> bus-width = <8>;
> cap-mmc-highspeed;
> - disable-wp;
> non-removable;
> pinctrl-names = "default";
> pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
> @@ -188,7 +161,7 @@
> };
>
> &hdmi {
> - ddc-i2c-bus = <&i2c2>;
> + ddc-i2c-bus = <&i2c5>;
> status = "okay";
> };
>
> @@ -324,15 +297,15 @@
> };
> };
>
> - vcc10_lcd: LDO_REG6 {
> - regulator-name = "vcc10_lcd";
> + vdd10_lcd: LDO_REG6 {
> + regulator-name = "vdd10_lcd";
> regulator-min-microvolt = <1000000>;
> regulator-max-microvolt = <1000000>;
> regulator-always-on;
> regulator-boot-on;
> regulator-state-mem {
> regulator-on-in-suspend;
> - regulator-suspend-microvolt = <1800000>;
> + regulator-suspend-microvolt = <1000000>;
> };
> };
>
> @@ -385,7 +358,7 @@
> };
> };
>
> -&i2c2 {
> +&i2c5 {
> status = "okay";
> };
>
> @@ -402,6 +375,12 @@
> status = "okay";
> };
>
> +&tsadc {
> + rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
> + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
> + status = "okay";
> +};
> +
> &uart2 {
> status = "okay";
> };
> @@ -463,15 +442,21 @@
> };
> };
>
> + hdmi {
> + vcc50_hdmi_en: vcc50-hdmi-en {
> + rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> pmic {
> pmic_int: pmic-int {
> - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
> + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
> };
> };
>
> usb_host {
> phy_pwr_en: phy-pwr-en {
> - rockchip,pins = <RK_GPIO2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>;
> + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>;
> };
>
> usb2_pwr_en: usb2-pwr-en {
> @@ -481,7 +466,7 @@
>
> usb_otg {
> otg_vbus_drv: otg-vbus-drv {
> - rockchip,pins = <RK_GPIO0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
> + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
>
> };
> };
More information about the U-Boot
mailing list