[U-Boot, 00/13] board: ge: complete DM conversion

Ian Ray ian.ray at ge.com
Fri Jan 31 14:07:51 CET 2020


This series finishes the conversion to DM mode for drivers used
on GE boards.

The first patch adds the ability to specify partitions for eeprom in
the device tree, and query eeprom device sizes.
Each partition creates a child device, allowing board code to find the
eeprom parition by name.
This feature is used in the second and third patches.

The bulk of the work is for converting i2c board code to DM driver
accesses for the various drivers.


Ian Ray (4):
  board: ge: mx53ppd: enable DM_VIDEO
  board: ge: bx50v3: override panel
  board: ge: mx53ppd: use DM for uart
  board: ge: bx50v3, imx53ppd: configure CONFIG_SYS_BOOTMAPSZ

Robert Beckett (9):
  misc: i2c_eeprom: set offset len and chip addr offset mask
  board: ge: bx50v3, imx53ppd: add eeprom partitions
  board: ge: bx50v3, imx53ppd: use DM I2C
  board: ge: bx50v3: add i2c eeprom bootcount storage
  board: ge: mx53ppd: add i2c eeprom bootcount storage
  board: ge: bx50v3: Enable DM PWM for backlight
  board: ge: mx53ppd: Use DM for ethernet
  board: ge: bx50v3: use DM for uart
  board: ge: bx50v3, mx53ppd: fix firstboot detection

 arch/arm/dts/imx53-ppd-uboot.dtsi    |  46 ++++++++
 arch/arm/dts/imx53-ppd.dts           |   5 +-
 arch/arm/dts/imx6q-b450v3.dts        |   2 +
 arch/arm/dts/imx6q-b650v3.dts        |   2 +
 arch/arm/dts/imx6q-b850v3.dts        |   2 +
 arch/arm/dts/imx6q-bx50v3-uboot.dtsi |  25 ++++
 arch/arm/dts/imx6q-bx50v3.dtsi       |   3 +-
 board/ge/bx50v3/Kconfig              |   2 -
 board/ge/bx50v3/bx50v3.c             | 219 ++++++-----------------------------
 board/ge/common/Kconfig              |  14 ---
 board/ge/common/ge_common.c          |  17 +--
 board/ge/common/vpd_reader.c         |  37 +++---
 board/ge/mx53ppd/Kconfig             |   2 -
 board/ge/mx53ppd/Makefile            |   2 +-
 board/ge/mx53ppd/mx53ppd.c           |  67 +----------
 board/ge/mx53ppd/mx53ppd_video.c     | 125 +++++++-------------
 board/ge/mx53ppd/ppd_gpio.h          |   8 --
 configs/ge_bx50v3_defconfig          |  27 ++++-
 configs/mx53ppd_defconfig            |  31 +++--
 drivers/misc/i2c_eeprom.c            |  35 ++++++
 include/configs/ge_bx50v3.h          |  49 ++------
 include/configs/mx53ppd.h            |  76 ++----------
 22 files changed, 295 insertions(+), 501 deletions(-)
 delete mode 100644 board/ge/common/Kconfig

-- 
2.10.1



More information about the U-Boot mailing list