[PATCH] distro_bootcmd: Add support for loading user environment

[Tom Rini]

On Fri, Jan 31, 2020 at 07:28:02PM +0100, Soeren Moch wrote:
> 
> 
> On 31.01.20 19:18, Stephen Warren wrote:
> > On 1/31/20 7:54 AM, Tom Rini wrote:
> >> On Fri, Jan 31, 2020 at 02:42:25PM +0000, Jon Hunter wrote:
> >>>
> >>> On 31/01/2020 14:05, Tom Rini wrote:
> >>>> On Fri, Jan 31, 2020 at 01:24:21PM +0000, Jon Hunter wrote:
> >>>>>
> >>>>> On 31/01/2020 12:42, Soeren Moch wrote:
> >>>>>> On 31.01.20 11:59, Jon Hunter wrote:
> >>>>>>> U-Boot supports loading a user environment from a file in the
> >>>>>>> file-system. Therefore to make it easier for users to override the
> >>>>>>> default environment, add support to the 'distro_bootcmd' to look
> >>>>>>> for
> >>>>>>> and load a user environment in a file called 'uEnv.txt' in the same
> >>>>>>> locations where an extlinux.conf or boot script might be found.
> >>>>>>
> >>>>>> We already have boot script support, which can easily be used to
> >>>>>> modify
> >>>>>> the environment. Do we really need to bloat the distro_boot
> >>>>>> machinery
> >>>>>> further with environment import, that is quite limited in
> >>>>>> contrast to
> >>>>>> boot scripts?
> >>>>>
> >>>>> If you are booting with an extlinux.conf file, as we do by
> >>>>> default, then
> >>>>> if this file is found, this is always booted from before you have the
> >>>>> opportunity to run the boot.scr script.
> >>>>>
> >>>>> Furthermore if you did switch the order to boot from a boot.scr
> >>>>> script
> >>>>> before the extlinux.conf, but you just wanted to do some simple
> >>>>> modifications of the environment before booting (ie. so the boot.scr
> >>>>> does not actually boot the system), then as the code is today you
> >>>>> get a
> >>>>> 'echo SCRIPT FAILED: continuing...' message.
> >>>>>
> >>>>> Yes this could be changed, but just seems cleaner and simpler to add
> >>>>> support to make changes to the environment before the
> >>>>> extlinux.conf is
> >>>>> loaded.
> >>>>>
> >>>>> Yes this does add more to the environment, but it is hardly
> >>>>> significant
> >>>>> bloat, but if that is a concern then we could always disable this by
> >>>>> default and allow users to enable it.
> >>>>
> >>>> This is something I think we had talked about and rejected doing
> >>>> initially.  Can you please expand on the use-case here, and why it's
> >>>> perhaps not better handled via PREBOOT on some platforms?  Thanks!
> >>>
> >>> We have one specific use-case in a downstream version of u-boot
> >>> where we
> >>> store some parameters in the u-boot environment for tweaking the DT
> >>> firmware on boot [0]. Now there are cases where we do not wish to
> >>> modify
> >>> DT at all and so want to clear these variables and I would like a
> >>> way to
> >>> automate the re-configuration of the u-boot environment without the
> >>> user
> >>> having to manually set these just by the presence of a uEnv.txt file on
> >>> the disk.
> >>>
> >>> Admittedly, this particular use-case/scenario is not directly
> >>> applicable
> >>> to the mainline u-boot branch as there is no support for these
> >>> environment variables for Tegra (yet). However, it seemed that this
> >>> change would have some value in upstream u-boot as well to allow the
> >>> user to change any default environment variables without having to
> >>> re-compile and hence, I decided submit this change here.
> >>>
> >>> For example, if we wanted to tweak any of the default environment
> >>> variables that are currently in 'include/configs/tegra210-common.h' we
> >>> could. Now you may say if we are not tweaking these very often, then
> >>> why
> >>> not recompile, and we could, but given that we have the ability to load
> >>> environment parameters from a file on disk, it seems as shame that in
> >>> the current boot flow there is no way to make use of this extremely
> >>> useful feature.
> >>
> >> I really think this is a good case for CONFIG_PREBOOT to execute a
> >> script (and we have other examples of that today) rather than something
> >> to put in to distro boot for everyone.  Thanks!
> >
> > I can definitely imagine there are many reasons a user might want to
> > have a way to modify U-Boot's environment easily via creating/editing
> > uEnv.txt rather than having to interactively run setenv/saveenv on the
> > U-Boot console.
> >
> > So, I think the main question is where to place uEnv.txt. If we use
> > CONFIG_PREBOOT, we'd either have to:
> >
> > a) Hard-code a single storage device to load it from, which involved
> > deciding on a platform-by-platform basis which is the best location to
> > load it from.
> >
> > OR:
> >
> > b) Duplicate the existing device scanning logic from the distro boot
> > scripts into CONFIG_PREBOOT. I'd rather not see the duplication.
> >
> > This patch achieves the auto-scanning for uEnv.txt without the
> > disadvantage of (b) above. Also, it allows uEnv.txt to follow a
> > removable storage device, which can have advantages. In the specific
> > use-case Jon is working on, we'll want to edit the environment to
> > disable some U-Boot features when using an upstream kernel, and not do
> > that editing when booting a downstream kernel. On the particular
> > platform Jon is using, the primary storage device is an SD card. If
> > uEnv.txt can follow the SD card that'd be very useful. Of course, we
> > could just hard-code the SD card as the location of uEnv.txt, but that
> > wouldn't work well for systems that don't use removable media as the
> > primary storage location (so we'd choose to look for uEnv.txt on e.g.
> > fixed eMMC) yet the user has actually chosen to boot from SD card
> > (which is earlier in boot_targets to allow booting from SD).
> >
> > In summary, I think doing this in the distro boot commands probably
> > does make sense.
> Everything what you put into the config_distro_bootcmd.h include file
> you can put as well in your board specific config file after including
> this include file. If several boards want to use this uEnv logic, they
> can create a separate include file for that.
> 
> Please do not bloat the distro_boot machinery with something that is not
> part of what distros use to configure and boot the kernel.

And making it easier to re-use chunks of environment logic is part of
what and why I want include/environment/.  Perhaps another starting
point here would be to make the scan logic reusable and placed somewhere
there so that it can be used in both PREBOOT options and distro boot and
elsewhere.

> 
> Thanks,
> Soeren
> 

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200131/3c44238f/attachment.sig>