[PATCHv4 9/9] board: ge: b1x5v2: Add GE B1x5v2 and B1x5Pv2

[sbabic at denx.de]

> GE B1x5v2 patient monitor series is similar to the CARESCAPE Monitor
> series (GE Bx50). It consists of a carrier PCB used in combination
> with a Congatec QMX6 SoM. This adds U-Boot support using device model
> everywhere and SPL for memory initialization.
> Proper configuration is provided as 'ge_b1x5v2_defconfig' and the
> combined image u-boot-with-spi.imx can be flashed directly to 1024
> byte offset to /dev/mtdblock0. Alternatively SPL and u-boot.imx can
> be loaded separately via USB-OTG using e.g. imx_usb.
> Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
> Reviewed-by: Tom Rini <trini at konsulko.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================