[PATCH v4 3/3] armv8: lx2162aqds: Add support for LX2162AQDS platform
Meenakshi Aggarwal
meenakshi.aggarwal at nxp.com
Thu Nov 5 07:35:08 CET 2020
Any comments?
> -----Original Message-----
> From: Meenakshi Aggarwal <meenakshi.aggarwal at nxp.com>
> Sent: Thursday, October 29, 2020 7:16 PM
> To: u-boot at lists.denx.de; trini at konsulko.com; Priyanka Jain
> <priyanka.jain at nxp.com>
> Cc: Varun Sethi <V.Sethi at nxp.com>; Meenakshi Aggarwal
> <meenakshi.aggarwal at nxp.com>; Ioana Ciornei <ioana.ciornei at nxp.com>;
> Qiang Zhao <qiang.zhao at nxp.com>; Hui Song <hui.song_1 at nxp.com>; Manish
> Tomar <manish.tomar at nxp.com>; Vikas Singh <vikas.singh at nxp.com>
> Subject: [PATCH v4 3/3] armv8: lx2162aqds: Add support for LX2162AQDS
> platform
>
> From: Meenakshi Aggarwal <meenakshi.aggarwal at nxp.com>
>
> This patch add base support for LX2162AQDS board.
> LX2162AQDS board supports LX2162A family SoCs.
> This patch add basic support of platform.
>
> Signed-off-by: Ioana Ciornei <ioana.ciornei at nxp.com>
> Signed-off-by: Zhao Qiang <qiang.zhao at nxp.com>
> Signed-off-by: hui.song <hui.song_1 at nxp.com>
> Signed-off-by: Manish Tomar <manish.tomar at nxp.com>
> Signed-off-by: Vikas Singh <vikas.singh at nxp.com>
> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal at nxp.com>
> ---
> arch/arm/Kconfig | 12 +
> arch/arm/dts/Makefile | 6 +-
> arch/arm/dts/fsl-lx2160a-qds.dts | 3 -
> arch/arm/dts/fsl-lx2160a-qds.dtsi | 22 +-
> arch/arm/dts/fsl-lx2162a-qds-17-x.dts | 17 +
> arch/arm/dts/fsl-lx2162a-qds-18-x.dts | 17 +
> arch/arm/dts/fsl-lx2162a-qds-20-x.dts | 17 +
> arch/arm/dts/fsl-lx2162a-qds-sd1-17.dtsi | 58 ++
> arch/arm/dts/fsl-lx2162a-qds-sd1-18.dtsi | 61 ++
> arch/arm/dts/fsl-lx2162a-qds-sd1-20.dtsi | 26 +
> arch/arm/dts/fsl-lx2162a-qds.dts | 34 +
> board/freescale/common/qixis.h | 25 +
> board/freescale/common/vid.h | 31 +
> board/freescale/lx2160a/Kconfig | 16 +
> board/freescale/lx2160a/MAINTAINERS | 26 +
> board/freescale/lx2160a/Makefile | 1 +
> board/freescale/lx2160a/README | 132 ++++
> board/freescale/lx2160a/eth_lx2160ardb.c | 3 +-
> board/freescale/lx2160a/eth_lx2162aqds.c | 974
> +++++++++++++++++++++++++
> board/freescale/lx2160a/lx2160a.c | 43 +-
> board/freescale/lx2160a/lx2160a.h | 61 ++
> configs/lx2162aqds_tfa_SECURE_BOOT_defconfig | 98 +++
> configs/lx2162aqds_tfa_defconfig | 96 +++
> configs/lx2162aqds_tfa_verified_boot_defconfig | 103 +++
> include/configs/lx2160a_common.h | 2 +
> include/configs/lx2160aqds.h | 75 --
> include/configs/lx2160ardb.h | 49 --
> include/configs/lx2162aqds.h | 78 ++
> 28 files changed, 1936 insertions(+), 150 deletions(-)
> create mode 100644 arch/arm/dts/fsl-lx2162a-qds-17-x.dts
> create mode 100644 arch/arm/dts/fsl-lx2162a-qds-18-x.dts
> create mode 100644 arch/arm/dts/fsl-lx2162a-qds-20-x.dts
> create mode 100644 arch/arm/dts/fsl-lx2162a-qds-sd1-17.dtsi
> create mode 100644 arch/arm/dts/fsl-lx2162a-qds-sd1-18.dtsi
> create mode 100644 arch/arm/dts/fsl-lx2162a-qds-sd1-20.dtsi
> create mode 100644 arch/arm/dts/fsl-lx2162a-qds.dts
> create mode 100644 board/freescale/lx2160a/eth_lx2162aqds.c
> create mode 100644 board/freescale/lx2160a/lx2160a.h
> create mode 100644 configs/lx2162aqds_tfa_SECURE_BOOT_defconfig
> create mode 100644 configs/lx2162aqds_tfa_defconfig
> create mode 100644 configs/lx2162aqds_tfa_verified_boot_defconfig
> create mode 100644 include/configs/lx2162aqds.h
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 80f0960..e055bd6 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -1326,6 +1326,18 @@ config TARGET_LX2160AQDS
> is a high-performance development platform that supports the
> QorIQ LX2160A/LX2120A/LX2080A Layerscape Architecture processor.
>
> +config TARGET_LX2162AQDS
> + bool "Support lx2162aqds"
> + select ARCH_LX2162A
> + select ARCH_MISC_INIT
> + select ARM64
> + select ARMV8_MULTIENTRY
> + select ARCH_SUPPORT_TFABOOT
> + select BOARD_LATE_INIT
> + help
> + Support for NXP LX2162AQDS platform.
> + The lx2162aqds support is based on LX2160A Layerscape Architecture
> processor.
> +
> config TARGET_HIKEY
> bool "Support HiKey 96boards Consumer Edition Platform"
> select ARM64
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index b195723..fc138a1 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -411,7 +411,11 @@ dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
> fsl-lx2160a-qds-19-x-x.dtb \
> fsl-lx2160a-qds-19-11-x.dtb \
> fsl-lx2160a-qds-20-x-x.dtb \
> - fsl-lx2160a-qds-20-11-x.dtb
> + fsl-lx2160a-qds-20-11-x.dtb \
> + fsl-lx2162a-qds.dtb\
> + fsl-lx2162a-qds-17-x.dtb\
> + fsl-lx2162a-qds-18-x.dtb\
> + fsl-lx2162a-qds-20-x.dtb
> dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
> fsl-ls1043a-qds-lpuart.dtb \
> fsl-ls1043a-rdb.dtb \
> diff --git a/arch/arm/dts/fsl-lx2160a-qds.dts b/arch/arm/dts/fsl-lx2160a-qds.dts
> index e0f5d5e..332c778 100644
> --- a/arch/arm/dts/fsl-lx2160a-qds.dts
> +++ b/arch/arm/dts/fsl-lx2160a-qds.dts
> @@ -13,7 +13,4 @@
> / {
> model = "NXP Layerscape LX2160AQDS Board";
> compatible = "fsl,lx2160aqds", "fsl,lx2160a";
> - aliases {
> - spi0 = &fspi;
> - };
> };
> diff --git a/arch/arm/dts/fsl-lx2160a-qds.dtsi b/arch/arm/dts/fsl-lx2160a-
> qds.dtsi
> index 96c9800..288607c 100644
> --- a/arch/arm/dts/fsl-lx2160a-qds.dtsi
> +++ b/arch/arm/dts/fsl-lx2160a-qds.dtsi
> @@ -2,12 +2,18 @@
> /*
> * NXP LX2160AQDS common device tree source
> *
> - * Copyright 2018-2019 NXP
> + * Copyright 2018-2020 NXP
> *
> */
>
> #include "fsl-lx2160a.dtsi"
>
> +/ {
> + aliases {
> + spi0 = &fspi;
> + };
> +};
> +
> &dpmac17 {
> status = "okay";
> phy-handle = <&rgmii_phy1>;
> @@ -251,6 +257,20 @@
> };
> };
>
> +&fspi {
> + status = "okay";
> +
> + mt35xu512aba0: flash at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "jedec,spi-nor";
> + spi-max-frequency = <50000000>;
> + reg = <0>;
> + spi-rx-bus-width = <8>;
> + spi-tx-bus-width = <1>;
> + };
> +};
> +
> &sata0 {
> status = "okay";
> };
> diff --git a/arch/arm/dts/fsl-lx2162a-qds-17-x.dts b/arch/arm/dts/fsl-lx2162a-
> qds-17-x.dts
> new file mode 100644
> index 0000000..8a8895f
> --- /dev/null
> +++ b/arch/arm/dts/fsl-lx2162a-qds-17-x.dts
> @@ -0,0 +1,17 @@
> +// SPDX-License-Identifier: GPL-2.0+ OR X11
> +/*
> + * NXP LX2162AQDS device tree source for SERDES protocol 17.x
> + *
> + * Copyright 2020 NXP
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include "fsl-lx2162a-qds-sd1-17.dtsi"
> +
> +/ {
> + model = "NXP Layerscape LX2160AQDS Board (DTS 17.x)";
> + compatible = "fsl,lx2162aqds", "fsl,lx2160a";
> +
> +};
> diff --git a/arch/arm/dts/fsl-lx2162a-qds-18-x.dts b/arch/arm/dts/fsl-lx2162a-
> qds-18-x.dts
> new file mode 100644
> index 0000000..c28e5e2
> --- /dev/null
> +++ b/arch/arm/dts/fsl-lx2162a-qds-18-x.dts
> @@ -0,0 +1,17 @@
> +// SPDX-License-Identifier: GPL-2.0+ OR X11
> +/*
> + * NXP LX2162AQDS device tree source for SERDES protocol 18.x
> + *
> + * Copyright 2020 NXP
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include "fsl-lx2162a-qds-sd1-18.dtsi"
> +
> +/ {
> + model = "NXP Layerscape LX2160AQDS Board (DTS 18.x)";
> + compatible = "fsl,lx2162aqds", "fsl,lx2160a";
> +
> +};
> diff --git a/arch/arm/dts/fsl-lx2162a-qds-20-x.dts b/arch/arm/dts/fsl-lx2162a-
> qds-20-x.dts
> new file mode 100644
> index 0000000..7882c76
> --- /dev/null
> +++ b/arch/arm/dts/fsl-lx2162a-qds-20-x.dts
> @@ -0,0 +1,17 @@
> +// SPDX-License-Identifier: GPL-2.0+ OR X11
> +/*
> + * NXP LX2162AQDS device tree source for SERDES protocol 20.x
> + *
> + * Copyright 2020 NXP
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include "fsl-lx2162a-qds-sd1-20.dtsi"
> +
> +/ {
> + model = "NXP Layerscape LX2160AQDS Board (DTS 20.x)";
> + compatible = "fsl,lx2162aqds", "fsl,lx2160a";
> +
> +};
> diff --git a/arch/arm/dts/fsl-lx2162a-qds-sd1-17.dtsi b/arch/arm/dts/fsl-
> lx2162a-qds-sd1-17.dtsi
> new file mode 100644
> index 0000000..60f5a4e
> --- /dev/null
> +++ b/arch/arm/dts/fsl-lx2162a-qds-sd1-17.dtsi
> @@ -0,0 +1,58 @@
> +// SPDX-License-Identifier: GPL-2.0+ OR X11
> +/*
> + * NXP LX2162AQDS device tree source for the SERDES block #1 - protocol 17
> + *
> + * Some assumptions are made:
> + * * mezzanine card M8 is connected to IO SLOT1 (25g-aui for DPMAC 3,4,5,6)
> + *
> + * Copyright 2020 NXP
> + *
> + */
> +
> +#include "fsl-lx2160a-qds.dtsi"
> +
> +&dpmac3 {
> + status = "okay";
> + phy-handle = <&inphi_phy0>;
> + phy-connection-type = "25g-aui";
> +};
> +
> +&dpmac4 {
> + status = "okay";
> + phy-handle = <&inphi_phy1>;
> + phy-connection-type = "25g-aui";
> +};
> +
> +&dpmac5 {
> + status = "okay";
> + phy-handle = <&inphi_phy2>;
> + phy-connection-type = "25g-aui";
> +};
> +
> +&dpmac6 {
> + status = "okay";
> + phy-handle = <&inphi_phy3>;
> + phy-connection-type = "25g-aui";
> +};
> +
> +&emdio1_slot1 {
> + inphi_phy0: ethernet-phy at 0 {
> + compatible = "ethernet-phy-id0210.7440";
> + reg = <0x0>;
> + };
> +
> + inphi_phy1: ethernet-phy at 1 {
> + compatible = "ethernet-phy-id0210.7440";
> + reg = <0x1>;
> + };
> +
> + inphi_phy2: ethernet-phy at 2 {
> + compatible = "ethernet-phy-id0210.7440";
> + reg = <0x2>;
> + };
> +
> + inphi_phy3: ethernet-phy at 3 {
> + compatible = "ethernet-phy-id0210.7440";
> + reg = <0x3>;
> + };
> +};
> diff --git a/arch/arm/dts/fsl-lx2162a-qds-sd1-18.dtsi b/arch/arm/dts/fsl-
> lx2162a-qds-sd1-18.dtsi
> new file mode 100644
> index 0000000..8e11b06
> --- /dev/null
> +++ b/arch/arm/dts/fsl-lx2162a-qds-sd1-18.dtsi
> @@ -0,0 +1,61 @@
> +// SPDX-License-Identifier: GPL-2.0+ OR X11
> +/*
> + * NXP LX2162AQDS device tree source for the SERDES block #1 - protocol 18
> + *
> + * Some assumptions are made:
> + * * mezzanine card M11 is connected to IO SLOT1 (usxgmii for DPMAC 3,4)
> + * * mezzanine card M13/M8 is connected to IO SLOT6 (25g-aui for DPMAC
> 5,6)
> + *
> + * Copyright 2020 NXP
> + *
> + */
> +
> +#include "fsl-lx2160a-qds.dtsi"
> +
> +&dpmac3 {
> + status = "okay";
> + phy-handle = <&aquantia_phy1>;
> + phy-connection-type = "usxgmii";
> +};
> +
> +&dpmac4 {
> + status = "okay";
> + phy-handle = <&aquantia_phy2>;
> + phy-connection-type = "usxgmii";
> +};
> +
> +&dpmac5 {
> + status = "okay";
> + phy-handle = <&inphi_phy0>;
> + phy-connection-type = "25g-aui";
> +};
> +
> +&dpmac6 {
> + status = "okay";
> + phy-handle = <&inphi_phy1>;
> + phy-connection-type = "25g-aui";
> +};
> +
> +&emdio1_slot1 {
> + aquantia_phy1: ethernet-phy at 4 {
> + compatible = "ethernet-phy-ieee802.3-c45";
> + reg = <0x0>;
> + };
> +
> + aquantia_phy2: ethernet-phy at 5 {
> + compatible = "ethernet-phy-ieee802.3-c45";
> + reg = <0x1>;
> + };
> +};
> +
> +&emdio1_slot6 {
> + inphi_phy0: ethernet-phy at 0 {
> + compatible = "ethernet-phy-id0210.7440";
> + reg = <0x0>;
> + };
> +
> + inphi_phy1: ethernet-phy at 1 {
> + compatible = "ethernet-phy-id0210.7440";
> + reg = <0x1>;
> + };
> +};
> diff --git a/arch/arm/dts/fsl-lx2162a-qds-sd1-20.dtsi b/arch/arm/dts/fsl-
> lx2162a-qds-sd1-20.dtsi
> new file mode 100644
> index 0000000..faf4285
> --- /dev/null
> +++ b/arch/arm/dts/fsl-lx2162a-qds-sd1-20.dtsi
> @@ -0,0 +1,26 @@
> +// SPDX-License-Identifier: GPL-2.0+ OR X11
> +/*
> + * NXP LX2162AQDS device tree source for the SERDES block #1 - protocol 20
> + *
> + * Some assumptions are made:
> + * * Mezzanine card M8 is connected to IO SLOT1
> + * (xlaui4 for DPMAC 1)
> + *
> + * Copyright 2020 NXP
> + *
> + */
> +
> +#include "fsl-lx2160a-qds.dtsi"
> +
> +&dpmac1 {
> + status = "okay";
> + phy-handle = <&cortina_phy1_0>;
> + phy-connection-type = "xlaui4";
> +};
> +
> +&emdio1_slot1 {
> + cortina_phy1_0: ethernet-phy at 0 {
> + compatible = "ethernet-phy-ieee802.3-c45";
> + reg = <0x0>;
> + };
> +};
> diff --git a/arch/arm/dts/fsl-lx2162a-qds.dts b/arch/arm/dts/fsl-lx2162a-qds.dts
> new file mode 100644
> index 0000000..b165265
> --- /dev/null
> +++ b/arch/arm/dts/fsl-lx2162a-qds.dts
> @@ -0,0 +1,34 @@
> +// SPDX-License-Identifier: GPL-2.0+ OR X11
> +/*
> + * NXP LX2162AQDS device tree source
> + *
> + * Copyright 2020 NXP
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include "fsl-lx2160a-qds.dtsi"
> +
> +/ {
> + model = "NXP Layerscape LX2162AQDS Board";
> + compatible = "fsl,lx2162aqds", "fsl,lx2160a";
> +
> + aliases {
> + pcie at 3500000 {
> + status = "disabled";
> + };
> +
> + pcie at 3800000 {
> + status = "disabled";
> + };
> +
> + pcie at 3900000 {
> + status = "disabled";
> + };
> + };
> +};
> +
> +&usb1 {
> + status = "disabled";
> +};
> diff --git a/board/freescale/common/qixis.h b/board/freescale/common/qixis.h
> index 93638d2..0860bd2 100644
> --- a/board/freescale/common/qixis.h
> +++ b/board/freescale/common/qixis.h
> @@ -141,4 +141,29 @@ void qixis_write_i2c(unsigned int reg, u8 value);
>
> #define QIXIS_EVDD_BY_SDHC_VS 0x0c
>
> +#if defined(CONFIG_TARGET_LX2160AQDS) ||
> defined(CONFIG_TARGET_LX2162AQDS) || \
> +defined(CONFIG_TARGET_LX2160ARDB)
> +#define QIXIS_XMAP_MASK 0x07
> +#define QIXIS_RST_CTL_RESET_EN 0x30
> +#define QIXIS_LBMAP_DFLTBANK 0x00
> +#define QIXIS_LBMAP_ALTBANK 0x20
> +#define QIXIS_LBMAP_QSPI 0x00
> +#define QIXIS_RCW_SRC_QSPI 0xff
> +#define QIXIS_RST_CTL_RESET 0x31
> +#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
> +#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
> +#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
> +#define QIXIS_LBMAP_MASK 0x0f
> +#define QIXIS_LBMAP_SD
> +#define QIXIS_LBMAP_EMMC
> +#define QIXIS_RCW_SRC_SD 0x08
> +#define QIXIS_RCW_SRC_EMMC 0x09
> +#define NON_EXTENDED_DUTCFG
> +#endif
> +
> +#if defined(CONFIG_TARGET_LX2160AQDS) ||
> defined(CONFIG_TARGET_LX2162AQDS)
> +#define QIXIS_SDID_MASK 0x07
> +#define QIXIS_ESDHC_NO_ADAPTER 0x7
> +#endif
> +
> #endif
> diff --git a/board/freescale/common/vid.h b/board/freescale/common/vid.h
> index 99778e9..52beb2c 100644
> --- a/board/freescale/common/vid.h
> +++ b/board/freescale/common/vid.h
> @@ -1,6 +1,7 @@
> /* SPDX-License-Identifier: GPL-2.0+ */
> /*
> * Copyright 2014 Freescale Semiconductor, Inc.
> + * Copyright 2020 NXP
> */
>
> #ifndef __VID_H_
> @@ -18,6 +19,36 @@
> /* step the IR regulator in 5mV increments */
> #define IR_VDD_STEP_DOWN 5
> #define IR_VDD_STEP_UP 5
> +
> +#ifdef CONFIG_TARGET_LX2160ARDB
> +/* The lowest and highest voltage allowed*/
> +#define VDD_MV_MIN 775
> +#define VDD_MV_MAX 855
> +#endif
> +
> +#if defined(CONFIG_TARGET_LX2160AQDS) ||
> defined(CONFIG_TARGET_LX2162AQDS)
> +/* The lowest and highest voltage allowed*/
> +#define VDD_MV_MIN 775
> +#define VDD_MV_MAX 925
> +#endif
> +
> +#if defined(CONFIG_TARGET_LX2160AQDS) ||
> defined(CONFIG_TARGET_LX2162AQDS) || \
> +defined(CONFIG_TARGET_LX2160ARDB)
> +/* PM Bus commands code for LTC3882*/
> +#define PWM_CHANNEL0 0x0
> +#define PMBUS_CMD_PAGE 0x0
> +#define PMBUS_CMD_READ_VOUT 0x8B
> +#define PMBUS_CMD_VOUT_COMMAND 0x21
> +#define PMBUS_CMD_PAGE_PLUS_WRITE 0x05
> +
> +/* Voltage monitor on channel 2*/
> +#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2
> +#define I2C_VOL_MONITOR_BUS_V_OVF 0x1
> +#define I2C_VOL_MONITOR_BUS_V_SHIFT 3
> +#define I2C_VOL_MONITOR_ADDR 0x63
> +#define I2C_MUX_CH_VOL_MONITOR 0xA
> +#endif
> +
> int adjust_vdd(ulong vdd_override);
>
> #endif /* __VID_H_ */
> diff --git a/board/freescale/lx2160a/Kconfig b/board/freescale/lx2160a/Kconfig
> index 122a385..7556f7d 100644
> --- a/board/freescale/lx2160a/Kconfig
> +++ b/board/freescale/lx2160a/Kconfig
> @@ -32,3 +32,19 @@ config SYS_CONFIG_NAME
> source "board/freescale/common/Kconfig"
> endif
>
> +if TARGET_LX2162AQDS
> +
> +config SYS_BOARD
> + default "lx2160a"
> +
> +config SYS_VENDOR
> + default "freescale"
> +
> +config SYS_SOC
> + default "fsl-layerscape"
> +
> +config SYS_CONFIG_NAME
> + default "lx2162aqds"
> +
> +source "board/freescale/common/Kconfig"
> +endif
> diff --git a/board/freescale/lx2160a/MAINTAINERS
> b/board/freescale/lx2160a/MAINTAINERS
> index 9fe79c0..c627417 100644
> --- a/board/freescale/lx2160a/MAINTAINERS
> +++ b/board/freescale/lx2160a/MAINTAINERS
> @@ -1,4 +1,5 @@
> LX2160ARDB BOARD
> +M: Meenakshi Aggarwal <meenakshi.aggarwal at nxp.com>
> M: Priyanka Jain <priyanka.jain at nxp.com>
> S: Maintained
> F: board/freescale/lx2160a/
> @@ -14,6 +15,7 @@ S: Maintained
> F: configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
>
> LX2160AQDS BOARD
> +M: Meenakshi Aggarwal <meenakshi.aggarwal at nxp.com>
> M: Pankaj Bansal <pankaj.bansal at nxp.com>
> S: Maintained
> F: board/freescale/lx2160a/eth_lx2160aqds.h
> @@ -25,3 +27,27 @@ LX2160AQDS_SECURE_BOOT BOARD
> M: Udit Agarwal <udit.agarwal at nxp.com>
> S: Maintained
> F: configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
> +
> +LX2162AQDS BOARD
> +M: Meenakshi Aggarwal <meenakshi.aggarwal at nxp.com>
> +S: Maintained
> +F: board/freescale/lx2160a/eth_lx2162aqds.h
> +F: include/configs/lx2162aqds.h
> +F: configs/lx2162aqds_tfa_defconfig
> +F: arch/arm/dts/fsl-lx2162a-qds.dts
> +F: arch/arm/dts/fsl-lx2162a-qds-17-x.dts
> +F: arch/arm/dts/fsl-lx2162a-qds-18-x.dts
> +F: arch/arm/dts/fsl-lx2162a-qds-20-x.dts
> +F: arch/arm/dts/fsl-lx2162a-qds-sd1-17.dtsi
> +F: arch/arm/dts/fsl-lx2162a-qds-sd1-18.dtsi
> +F: arch/arm/dts/fsl-lx2162a-qds-sd1-20.dtsi
> +
> +LX2162AQDS_SECURE_BOOT BOARD
> +M: Manish Tomar <Manish.Tomar at nxp.com>
> +S: Maintained
> +F: configs/lx2162aqds_tfa_SECURE_BOOT_defconfig
> +
> +LX2162AQDS_VERIFIED_BOOT BOARD
> +M: Manish Tomar <Manish.Tomar at nxp.com>
> +S: Maintained
> +F: configs/lx2162aqds_tfa_verified_boot_defconfig
> diff --git a/board/freescale/lx2160a/Makefile
> b/board/freescale/lx2160a/Makefile
> index d1a621b..c9561bf 100644
> --- a/board/freescale/lx2160a/Makefile
> +++ b/board/freescale/lx2160a/Makefile
> @@ -8,3 +8,4 @@ obj-y += lx2160a.o
> obj-y += ddr.o
> obj-$(CONFIG_TARGET_LX2160ARDB) += eth_lx2160ardb.o
> obj-$(CONFIG_TARGET_LX2160AQDS) += eth_lx2160aqds.o
> +obj-$(CONFIG_TARGET_LX2162AQDS) += eth_lx2162aqds.o
> diff --git a/board/freescale/lx2160a/README
> b/board/freescale/lx2160a/README
> index 62fb9ea..7bca98d 100644
> --- a/board/freescale/lx2160a/README
> +++ b/board/freescale/lx2160a/README
> @@ -195,3 +195,135 @@ SERDES3 |CARDS
> |Connect I/O cable to IO_SLOT6(J125)
> -------------------------------------------------------------------------
>
> +LX2162A SoC Overview
> +--------------------------------------
> +For details, please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
> +
> +LX2162AQDS board Overview
> +----------------------
> +DDR Memory
> + One ports of 72-bits (8-bits ECC) DDR4.
> + Each port supports four chip-selects and two DIMM
> + connectors. Data rate upto 2.9 GT/s.
> +
> +SERDES ports
> + Two serdes controllers (12 lanes)
> + Serdes1: Supports two USXGMII connectors, each connected through
> + Aquantia AQR107 phy, two 25GbE SFP+ modules connected through an
> Inphi
> + IN112525 phy and one 40 GbE QSFP+ module connected through an
> Inphi
> + CS4223 phy.
> +
> + Serdes2: Supports two PCIe x4 (Gen3) and one PCIe x8 (Gen3) connector,
> + four SATA 3.0 connectors
> +
> +eSDHC
> + eSDHC1: Supports a SD connector for connecting SD cards
> + eSDHC2: Supports 128GB Micron MTFC128GAJAECE-IT eMMC
> +
> +Octal SPI (XSPI)
> + Supports two 64 MB onbpard octal SPI flash memories, one SPI
> emulator
> + for off-board emulation
> +
> +I2C All system devices on I2C1 multiplexed using PCA9547 multiplexer
> + Serial Ports
> +
> +USB 3.0
> + One high speed USB 3.0 ports. First USB 3.0 port configured as Host
> + with Type-A connector, second USB 3.0 port configured as OTG with
> + micro-AB connector
> +
> +Serial Ports Two UART ports
> +Ethernet Two RGMII interfaces
> +Debug ARM JTAG support
> +
> +Booting Options
> +---------------
> +a) Flexspi boot
> +b) SD boot
> +c) eMMC boot
> +
> +Memory map for Flexspi flash
> +----------------------------
> +Image Flash Offset
> +bl2_flexspi_nor.pbl (RCW+PBI+bl2.pbl) 0x00000000
> +fip.bin (bl31 + bl33(u-boot) +
> + header for Secure-boot(secure-boot only)) 0x00100000
> +Boot firmware Environment 0x00500000
> +DDR PHY Firmware (fip_ddr_all.bin) 0x00800000
> +DPAA2 MC Firmware 0x00A00000
> +DPAA2 DPL 0x00D00000
> +DPAA2 DPC 0x00E00000
> +Kernel.itb 0x01000000
> +
> +Memory map for sd/eMMC card
> +----------------------------
> +Image SD/eMMC card Offset
> +bl2_sd.pbl (RCW+PBI+bl2.pbl) 0x00008
> +fip.bin (bl31 + bl33(u-boot) +
> + header for Secure-boot(secure-boot only)) 0x00800
> +Boot firmware Environment 0x02800
> +DDR PHY Firmware (fip_ddr_all.bin) 0x04000
> +DPAA2 MC Firmware 0x05000
> +DPAA2 DPL 0x06800
> +DPAA2 DPC 0x07000
> +Kernel.itb 0x08000
> +
> +Various Mezzanine cards and their connection for different SERDES protocols is
> +as below:
> +
> +SERDES1 |CARDS
> +-----------------------------------------------------------------------
> +1 |Mezzanine:X-M4-PCIE-SGMII (29733)
> + |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
> + |Connect I/O cable to IO_SLOT1(J110)
> +------------------------------------------------------------------------
> +3 |Mezzanine:X-M11-USXGMII (29828)
> + |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
> + |Connect I/O cable to IO_SLOT1(J110)
> +------------------------------------------------------------------------
> +15 |Mezzanine:X-M8-50G (29734)
> + |Connect Hydra Cable (HDR-198816-XX-ECUE) to SD_SLOT1 (J108)
> + |Connect I/O cable to IO_SLOT1(J110)
> +------------------------------------------------------------------------
> +17 |Mezzanine:X-M13-25G (32133)
> + |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
> + |Connect I/O cable to IO_SLOT1(J110)
> +------------------------------------------------------------------------
> +18 |Mezzanine:X-M11-USXGMII (29828), X-M13-25G (32133)
> + |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
> + |Connect M11 I/O cable to IO_SLOT1(J110), M13 I/O cable to
> IO_SLOT6(J125)
> +------------------------------------------------------------------------
> +20 |Mezzanine:X-M7-40G (29738)
> + |Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT1 (J108)
> + |Connect I/O cable to IO_SLOT1(J108)
> +------------------------------------------------------------------------
> +
> +
> +SERDES2 |CARDS
> +-----------------------------------------------------------------------
> +2 |Mezzanine:X-M6-PCIE-X8 (29737) *
> + |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
> + |Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT4 (J117)
> + |Connect I/O cable to IO_SLOT3(J116)
> +------------------------------------------------------------------------
> +3 |Mezzanine:X-M4-PCIE-SGMII (29733)
> + |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
> + |Connect I/O cable to IO_SLOT3(J116)
> + |Mezzanine:X-M4-PCIE-SGMII (29733)
> + |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT4 (J117)
> + |Connect I/O cable to IO_SLOT4(J119)
> +------------------------------------------------------------------------
> +5 |Mezzanine:X-M4-PCIE-SGMII (29733)
> + |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
> + |Connect I/O cable to IO_SLOT3(J116)
> + |Mezzanine:X-M5-SATA (29687)
> + |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT4 (J117)
> + |Connect I/O cable to IO_SLOT4(J119)
> +------------------------------------------------------------------------
> +11 |Mezzanine:X-M4-PCIE-SGMII (29733)
> + |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
> + |Connect I/O cable to IO_SLOT7(J127)
> + |Mezzanine:X-M4-PCIE-SGMII (29733)
> + |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT4 (J117)
> + |Connect I/O cable to IO_SLOT8(J131)
> +------------------------------------------------------------------------
> diff --git a/board/freescale/lx2160a/eth_lx2160ardb.c
> b/board/freescale/lx2160a/eth_lx2160ardb.c
> index b448883..b3125b7 100644
> --- a/board/freescale/lx2160a/eth_lx2160ardb.c
> +++ b/board/freescale/lx2160a/eth_lx2160ardb.c
> @@ -1,6 +1,6 @@
> // SPDX-License-Identifier: GPL-2.0+
> /*
> - * Copyright 2018 NXP
> + * Copyright 2018, 2020 NXP
> *
> */
>
> @@ -19,6 +19,7 @@
> #include <asm/arch/fsl_serdes.h>
> #include <fsl-mc/fsl_mc.h>
> #include <fsl-mc/ldpaa_wriop.h>
> +#include "lx2160a.h"
>
> DECLARE_GLOBAL_DATA_PTR;
>
> diff --git a/board/freescale/lx2160a/eth_lx2162aqds.c
> b/board/freescale/lx2160a/eth_lx2162aqds.c
> new file mode 100644
> index 0000000..4683f67
> --- /dev/null
> +++ b/board/freescale/lx2160a/eth_lx2162aqds.c
> @@ -0,0 +1,974 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2020 NXP
> + *
> + */
> +
> +#include <common.h>
> +#include <env.h>
> +#include <fdt_support.h>
> +#include <hwconfig.h>
> +#include <command.h>
> +#include <log.h>
> +#include <net.h>
> +#include <netdev.h>
> +#include <malloc.h>
> +#include <fsl_mdio.h>
> +#include <miiphy.h>
> +#include <phy.h>
> +#include <fm_eth.h>
> +#include <asm/io.h>
> +#include <exports.h>
> +#include <asm/arch/fsl_serdes.h>
> +#include <fsl-mc/fsl_mc.h>
> +#include <fsl-mc/ldpaa_wriop.h>
> +#include <linux/libfdt.h>
> +
> +#include "../common/qixis.h"
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#ifndef CONFIG_DM_ETH
> +#define EMI_NONE 0
> +#define EMI1 1 /* Mdio Bus 1 */
> +#define EMI2 2 /* Mdio Bus 2 */
> +
> +#if defined(CONFIG_FSL_MC_ENET)
> +enum io_slot {
> + IO_SLOT_NONE = 0,
> + IO_SLOT_1,
> + IO_SLOT_2,
> + IO_SLOT_3,
> + IO_SLOT_4,
> + IO_SLOT_5,
> + IO_SLOT_6,
> + IO_SLOT_7,
> + IO_SLOT_8,
> + EMI1_RGMII1,
> + EMI1_RGMII2,
> + IO_SLOT_MAX
> +};
> +
> +struct lx2162a_qds_mdio {
> + enum io_slot ioslot : 4;
> + u8 realbusnum : 4;
> + struct mii_dev *realbus;
> +};
> +
> +/* structure explaining the phy configuration on 8 lanes of a serdes*/
> +struct serdes_phy_config {
> + u8 serdes; /* serdes protocol */
> + struct phy_config {
> + u8 dpmacid;
> + /* -1 terminated array */
> + int phy_address[WRIOP_MAX_PHY_NUM + 1];
> + u8 mdio_bus;
> + enum io_slot ioslot;
> + } phy_config[SRDS_MAX_LANES];
> +};
> +
> +/* Table defining the phy configuration on 8 lanes of a serdes.
> + * Various assumptions have been made while defining this table.
> + * e.g. for serdes1 protocol 19 it is being assumed that X-M11-USXGMII
> + * card is being used for dpmac 3-4. (X-M12-XFI could also have been used)
> + * And also that this card is connected to IO Slot 1 (could have been connected
> + * to any of the 8 IO slots (IO slot 1 - IO slot 8)).
> + * similarly, it is also being assumed that MDIO 1 is selected on X-M7-40G card
> + * used in serdes1 protocol 19 (could have selected MDIO 2)
> + * To override these settings "dpmac" environment variable can be used after
> + * defining "dpmac_override" in hwconfig environment variable.
> + * This table has limited serdes protocol entries. It can be expanded as per
> + * requirement.
> + */
> +/***************************************************************
> **
> + *| SERDES_1 PROTOCOL | IO_SLOT | CARD |
> +
> *****************************************************************
> *
> + *| 2 | IO_SLOT_1 | M4-PCIE-SGMII |
> + *| 3 | IO_SLOT_1 | M11-USXGMII |
> + *| 15 | IO_SLOT_1 | M13-25G |
> + *| 17 | IO_SLOT_1 | M13-25G |
> + *| 18 | IO_SLOT_1 | M11-USXGMII |
> + *| | IO_SLOT_6 | M13-25G |
> + *| 20 | IO_SLOT_1 | M7-40G |
> +
> *****************************************************************
> + */
> +static const struct serdes_phy_config serdes1_phy_config[] = {
> + {1, {} },
> + {2, {{WRIOP1_DPMAC3, {SGMII_CARD_PORT1_PHY_ADDR, -1},
> + EMI1, IO_SLOT_1},
> + {WRIOP1_DPMAC4, {SGMII_CARD_PORT2_PHY_ADDR, -1},
> + EMI1, IO_SLOT_1},
> + {WRIOP1_DPMAC5, {SGMII_CARD_PORT3_PHY_ADDR, -1},
> + EMI1, IO_SLOT_1},
> + {WRIOP1_DPMAC6, {SGMII_CARD_PORT4_PHY_ADDR, -1},
> + EMI1, IO_SLOT_1} } },
> + {3, {{WRIOP1_DPMAC3, {AQ_PHY_ADDR1, -1},
> + EMI1, IO_SLOT_1},
> + {WRIOP1_DPMAC4, {AQ_PHY_ADDR2, -1},
> + EMI1, IO_SLOT_1},
> + {WRIOP1_DPMAC5, {AQ_PHY_ADDR3, -1},
> + EMI1, IO_SLOT_1},
> + {WRIOP1_DPMAC6, {AQ_PHY_ADDR4, -1},
> + EMI1, IO_SLOT_1} } },
> + {15, {{WRIOP1_DPMAC1, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
> + EMI1, IO_SLOT_1},
> + {WRIOP1_DPMAC2, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
> + EMI1, IO_SLOT_1} } },
> + {17, {{WRIOP1_DPMAC3, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
> + EMI1, IO_SLOT_1},
> + {WRIOP1_DPMAC4, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
> + EMI1, IO_SLOT_1},
> + {WRIOP1_DPMAC5, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
> + EMI1, IO_SLOT_1},
> + {WRIOP1_DPMAC6, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
> + EMI1, IO_SLOT_1} } },
> + {18, {{WRIOP1_DPMAC3, {AQ_PHY_ADDR1, -1},
> + EMI1, IO_SLOT_1},
> + {WRIOP1_DPMAC4, {AQ_PHY_ADDR2, -1},
> + EMI1, IO_SLOT_1},
> + {WRIOP1_DPMAC5, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
> + EMI1, IO_SLOT_6},
> + {WRIOP1_DPMAC6, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
> + EMI1, IO_SLOT_6} } },
> + {20, {{WRIOP1_DPMAC1, {CORTINA_PHY_ADDR1, -1},
> + EMI1, IO_SLOT_1} } }
> +};
> +
> +/***************************************************************
> **
> + *| SERDES_2 PROTOCOL | IO_SLOT | CARD |
> +
> *****************************************************************
> *
> + *| 2 | IO_SLOT_7 | M4-PCIE-SGMII |
> + *| | IO_SLOT_8 | M4-PCIE-SGMII |
> + *| 3 | IO_SLOT_7 | M4-PCIE-SGMII |
> + *| | IO_SLOT_8 | M4-PCIE-SGMII |
> + *| 5 | IO_SLOT_7 | M4-PCIE-SGMII |
> + *| 10 | IO_SLOT_7 | M4-PCIE-SGMII |
> + *| | IO_SLOT_8 | M4-PCIE-SGMII |
> + *| 11 | IO_SLOT_7 | M4-PCIE-SGMII |
> + *| | IO_SLOT_8 | M4-PCIE-SGMII |
> + *| 12 | IO_SLOT_7 | M4-PCIE-SGMII |
> + *| | IO_SLOT_8 | M4-PCIE-SGMII |
> +
> *****************************************************************
> *
> + */
> +static const struct serdes_phy_config serdes2_phy_config[] = {
> + {2, {} },
> + {3, {} },
> + {5, {} },
> + {10, {{WRIOP1_DPMAC11, {SGMII_CARD_PORT1_PHY_ADDR, -1},
> + EMI1, IO_SLOT_7},
> + {WRIOP1_DPMAC12, {SGMII_CARD_PORT2_PHY_ADDR, -1},
> + EMI1, IO_SLOT_7},
> + {WRIOP1_DPMAC17, {SGMII_CARD_PORT3_PHY_ADDR, -1},
> + EMI1, IO_SLOT_7},
> + {WRIOP1_DPMAC18, {SGMII_CARD_PORT4_PHY_ADDR, -1},
> + EMI1, IO_SLOT_7} } },
> + {11, {{WRIOP1_DPMAC12, {SGMII_CARD_PORT2_PHY_ADDR, -1},
> + EMI1, IO_SLOT_7},
> + {WRIOP1_DPMAC17, {SGMII_CARD_PORT3_PHY_ADDR, -1},
> + EMI1, IO_SLOT_7},
> + {WRIOP1_DPMAC18, {SGMII_CARD_PORT4_PHY_ADDR, -1},
> + EMI1, IO_SLOT_7},
> + {WRIOP1_DPMAC16, {SGMII_CARD_PORT2_PHY_ADDR, -1},
> + EMI1, IO_SLOT_8},
> + {WRIOP1_DPMAC13, {SGMII_CARD_PORT3_PHY_ADDR, -1},
> + EMI1, IO_SLOT_8},
> + {WRIOP1_DPMAC14, {SGMII_CARD_PORT4_PHY_ADDR, -1},
> + EMI1, IO_SLOT_8} } },
> + {12, {{WRIOP1_DPMAC11, {SGMII_CARD_PORT1_PHY_ADDR, -1},
> + EMI1, IO_SLOT_7},
> + {WRIOP1_DPMAC12, {SGMII_CARD_PORT2_PHY_ADDR, -1},
> + EMI1, IO_SLOT_7},
> + {WRIOP1_DPMAC17, {SGMII_CARD_PORT3_PHY_ADDR, -1},
> + EMI1, IO_SLOT_7},
> + {WRIOP1_DPMAC18, {SGMII_CARD_PORT4_PHY_ADDR, -1},
> + EMI1, IO_SLOT_7} } }
> +};
> +
> +static inline
> +const struct phy_config *get_phy_config(u8 serdes,
> + const struct serdes_phy_config *table,
> + u8 table_size)
> +{
> + int i;
> +
> + for (i = 0; i < table_size; i++) {
> + if (table[i].serdes == serdes)
> + return table[i].phy_config;
> + }
> +
> + return NULL;
> +}
> +
> +/* BRDCFG4 controls EMI routing for the board.
> + * Bits Function
> + * 7-6 EMI Interface #1 Primary Routing (CFG_MUX1_EMI1) (1.8V):
> + * EMI1 00= On-board PHY #1
> + * 01= On-board PHY #2
> + * 10= (reserved)
> + * 11= Slots 1..8 multiplexer and translator.
> + * 5-3 EMI Interface #1 Secondary Routing (CFG_MUX2_EMI1) (2.5V):
> + * EMI1X 000= Slot #1
> + * 001= Slot #2
> + * 010= Slot #3
> + * 011= Slot #4
> + * 100= Slot #5
> + * 101= Slot #6
> + * 110= Slot #7
> + * 111= Slot #8
> + * 2-0 EMI Interface #2 Routing (CFG_MUX_EMI2):
> + * EMI2 000= Slot #1 (secondary EMI)
> + * 001= Slot #2 (secondary EMI)
> + * 010= Slot #3 (secondary EMI)
> + * 011= Slot #4 (secondary EMI)
> + * 100= Slot #5 (secondary EMI)
> + * 101= Slot #6 (secondary EMI)
> + * 110= Slot #7 (secondary EMI)
> + * 111= Slot #8 (secondary EMI)
> + */
> +static int lx2162a_qds_get_mdio_mux_val(u8 realbusnum, enum io_slot ioslot)
> +{
> + switch (realbusnum) {
> + case EMI1:
> + switch (ioslot) {
> + case EMI1_RGMII1:
> + return 0;
> + case EMI1_RGMII2:
> + return 0x40;
> + default:
> + return (((ioslot - 1) << BRDCFG4_EMI1SEL_SHIFT) |
> 0xC0);
> + }
> + break;
> + case EMI2:
> + return ((ioslot - 1) << BRDCFG4_EMI2SEL_SHIFT);
> + default:
> + return -1;
> + }
> +}
> +
> +static void lx2162a_qds_mux_mdio(struct lx2162a_qds_mdio *priv)
> +{
> + u8 brdcfg4, mux_val, reg;
> +
> + brdcfg4 = QIXIS_READ(brdcfg[4]);
> + reg = brdcfg4;
> + mux_val = lx2162a_qds_get_mdio_mux_val(priv->realbusnum, priv-
> >ioslot);
> +
> + switch (priv->realbusnum) {
> + case EMI1:
> + brdcfg4 &= ~BRDCFG4_EMI1SEL_MASK;
> + brdcfg4 |= mux_val;
> + break;
> + case EMI2:
> + brdcfg4 &= ~BRDCFG4_EMI2SEL_MASK;
> + brdcfg4 |= mux_val;
> + break;
> + }
> +
> + if (brdcfg4 ^ reg)
> + QIXIS_WRITE(brdcfg[4], brdcfg4);
> +}
> +
> +static int lx2162a_qds_mdio_read(struct mii_dev *bus, int addr,
> + int devad, int regnum)
> +{
> + struct lx2162a_qds_mdio *priv = bus->priv;
> +
> + lx2162a_qds_mux_mdio(priv);
> +
> + return priv->realbus->read(priv->realbus, addr, devad, regnum);
> +}
> +
> +static int lx2162a_qds_mdio_write(struct mii_dev *bus, int addr, int devad,
> + int regnum, u16 value)
> +{
> + struct lx2162a_qds_mdio *priv = bus->priv;
> +
> + lx2162a_qds_mux_mdio(priv);
> +
> + return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
> +}
> +
> +static int lx2162a_qds_mdio_reset(struct mii_dev *bus)
> +{
> + struct lx2162a_qds_mdio *priv = bus->priv;
> +
> + return priv->realbus->reset(priv->realbus);
> +}
> +
> +static struct mii_dev *lx2162a_qds_mdio_init(u8 realbusnum, enum io_slot
> ioslot)
> +{
> + struct lx2162a_qds_mdio *pmdio;
> + struct mii_dev *bus;
> + /*should be within MDIO_NAME_LEN*/
> + char dummy_mdio_name[] = "LX2162A_QDS_MDIO1_IOSLOT1";
> +
> + if (realbusnum == EMI2) {
> + if (ioslot < IO_SLOT_1 || ioslot > IO_SLOT_8) {
> + printf("invalid ioslot %d\n", ioslot);
> + return NULL;
> + }
> + } else if (realbusnum == EMI1) {
> + if (ioslot < IO_SLOT_1 || ioslot > EMI1_RGMII2) {
> + printf("invalid ioslot %d\n", ioslot);
> + return NULL;
> + }
> + } else {
> + printf("not supported real mdio bus %d\n", realbusnum);
> + return NULL;
> + }
> +
> + if (ioslot == EMI1_RGMII1)
> + strcpy(dummy_mdio_name, "LX2162A_QDS_MDIO1_RGMII1");
> + else if (ioslot == EMI1_RGMII2)
> + strcpy(dummy_mdio_name, "LX2162A_QDS_MDIO1_RGMII2");
> + else
> + sprintf(dummy_mdio_name,
> "LX2162A_QDS_MDIO%d_IOSLOT%d",
> + realbusnum, ioslot);
> + bus = miiphy_get_dev_by_name(dummy_mdio_name);
> +
> + if (bus)
> + return bus;
> +
> + bus = mdio_alloc();
> + if (!bus) {
> + printf("Failed to allocate %s bus\n", dummy_mdio_name);
> + return NULL;
> + }
> +
> + pmdio = malloc(sizeof(*pmdio));
> + if (!pmdio) {
> + printf("Failed to allocate %s private data\n",
> dummy_mdio_name);
> + free(bus);
> + return NULL;
> + }
> +
> + switch (realbusnum) {
> + case EMI1:
> + pmdio->realbus =
> + miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME);
> + break;
> + case EMI2:
> + pmdio->realbus =
> + miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME);
> + break;
> + }
> +
> + if (!pmdio->realbus) {
> + printf("No real mdio bus num %d found\n", realbusnum);
> + free(bus);
> + free(pmdio);
> + return NULL;
> + }
> +
> + pmdio->realbusnum = realbusnum;
> + pmdio->ioslot = ioslot;
> + bus->read = lx2162a_qds_mdio_read;
> + bus->write = lx2162a_qds_mdio_write;
> + bus->reset = lx2162a_qds_mdio_reset;
> + strcpy(bus->name, dummy_mdio_name);
> + bus->priv = pmdio;
> +
> + if (!mdio_register(bus))
> + return bus;
> +
> + printf("No bus with name %s\n", dummy_mdio_name);
> + free(bus);
> + free(pmdio);
> + return NULL;
> +}
> +
> +static inline void do_phy_config(const struct phy_config *phy_config)
> +{
> + struct mii_dev *bus;
> + int i, phy_num, phy_address;
> +
> + for (i = 0; i < SRDS_MAX_LANES; i++) {
> + if (!phy_config[i].dpmacid)
> + continue;
> +
> + for (phy_num = 0;
> + phy_num < ARRAY_SIZE(phy_config[i].phy_address);
> + phy_num++) {
> + phy_address = phy_config[i].phy_address[phy_num];
> + if (phy_address == -1)
> + break;
> + wriop_set_phy_address(phy_config[i].dpmacid,
> + phy_num, phy_address);
> + }
> + /*Register the muxing front-ends to the MDIO buses*/
> + bus = lx2162a_qds_mdio_init(phy_config[i].mdio_bus,
> + phy_config[i].ioslot);
> + if (!bus)
> + printf("could not get bus for mdio %d ioslot %d\n",
> + phy_config[i].mdio_bus,
> + phy_config[i].ioslot);
> + else
> + wriop_set_mdio(phy_config[i].dpmacid, bus);
> + }
> +}
> +
> +static inline void do_dpmac_config(int dpmac, const char *arg_dpmacid,
> + char *env_dpmac)
> +{
> + const char *ret;
> + size_t len;
> + u8 realbusnum, ioslot;
> + struct mii_dev *bus;
> + int phy_num;
> + char *phystr = "phy00";
> +
> + /*search phy in dpmac arg*/
> + for (phy_num = 0; phy_num < WRIOP_MAX_PHY_NUM; phy_num++) {
> + sprintf(phystr, "phy%d", phy_num + 1);
> + ret = hwconfig_subarg_f(arg_dpmacid, phystr, &len,
> env_dpmac);
> + if (!ret) {
> + /*look for phy instead of phy1*/
> + if (!phy_num)
> + ret = hwconfig_subarg_f(arg_dpmacid, "phy",
> + &len, env_dpmac);
> + if (!ret)
> + continue;
> + }
> +
> + if (len != 4 || strncmp(ret, "0x", 2))
> + printf("invalid phy format in %s variable.\n"
> + "specify phy%d for %s in hex format e.g. 0x12\n",
> + env_dpmac, phy_num + 1, arg_dpmacid);
> + else
> + wriop_set_phy_address(dpmac, phy_num,
> + simple_strtoul(ret, NULL, 16));
> + }
> +
> + /*search mdio in dpmac arg*/
> + ret = hwconfig_subarg_f(arg_dpmacid, "mdio", &len, env_dpmac);
> + if (ret)
> + realbusnum = *ret - '0';
> + else
> + realbusnum = EMI_NONE;
> +
> + if (realbusnum) {
> + /*search io in dpmac arg*/
> + ret = hwconfig_subarg_f(arg_dpmacid, "io", &len, env_dpmac);
> + if (ret)
> + ioslot = *ret - '0';
> + else
> + ioslot = IO_SLOT_NONE;
> + /*Register the muxing front-ends to the MDIO buses*/
> + bus = lx2162a_qds_mdio_init(realbusnum, ioslot);
> + if (!bus)
> + printf("could not get bus for mdio %d ioslot %d\n",
> + realbusnum, ioslot);
> + else
> + wriop_set_mdio(dpmac, bus);
> + }
> +}
> +
> +#endif
> +#endif /* !CONFIG_DM_ETH */
> +
> +int board_eth_init(struct bd_info *bis)
> +{
> +#ifndef CONFIG_DM_ETH
> +#if defined(CONFIG_FSL_MC_ENET)
> + struct memac_mdio_info mdio_info;
> + struct memac_mdio_controller *regs;
> + int i;
> + const char *ret;
> + char *env_dpmac;
> + char dpmacid[] = "dpmac00", srds[] = "00_00_00";
> + size_t len;
> + struct mii_dev *bus;
> + const struct phy_config *phy_config;
> + struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
> + u32 srds_s1, srds_s2;
> +
> + srds_s1 = in_le32(&gur->rcwsr[28]) &
> + FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK;
> + srds_s1 >>= FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT;
> +
> + srds_s2 = in_le32(&gur->rcwsr[28]) &
> + FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK;
> + srds_s2 >>= FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT;
> +
> + sprintf(srds, "%d_%d", srds_s1, srds_s2);
> +
> + regs = (struct memac_mdio_controller
> *)CONFIG_SYS_FSL_WRIOP1_MDIO1;
> + mdio_info.regs = regs;
> + mdio_info.name = DEFAULT_WRIOP_MDIO1_NAME;
> +
> + /*Register the EMI 1*/
> + fm_memac_mdio_init(bis, &mdio_info);
> +
> + regs = (struct memac_mdio_controller
> *)CONFIG_SYS_FSL_WRIOP1_MDIO2;
> + mdio_info.regs = regs;
> + mdio_info.name = DEFAULT_WRIOP_MDIO2_NAME;
> +
> + /*Register the EMI 2*/
> + fm_memac_mdio_init(bis, &mdio_info);
> +
> + /* "dpmac" environment variable can be used after
> + * defining "dpmac_override" in hwconfig environment variable.
> + */
> + if (hwconfig("dpmac_override")) {
> + env_dpmac = env_get("dpmac");
> + if (env_dpmac) {
> + ret = hwconfig_arg_f("srds", &len, env_dpmac);
> + if (ret) {
> + if (strncmp(ret, srds, strlen(srds))) {
> + printf("SERDES configuration
> changed.\n"
> + "previous: %.*s, current: %s.\n"
> + "update dpmac variable.\n",
> + (int)len, ret, srds);
> + }
> + } else {
> + printf("SERDES configuration not found.\n"
> + "Please add srds:%s in dpmac variable\n",
> + srds);
> + }
> +
> + for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++)
> {
> + /* Look for dpmac1 to dpmac24(current max)
> arg
> + * in dpmac environment variable
> + */
> + sprintf(dpmacid, "dpmac%d", i);
> + ret = hwconfig_arg_f(dpmacid, &len,
> env_dpmac);
> + if (ret)
> + do_dpmac_config(i, dpmacid,
> env_dpmac);
> + }
> + } else {
> + printf("Warning: environment dpmac not found.\n"
> + "DPAA network interfaces may not work\n");
> + }
> + } else {
> + /*Look for phy config for serdes1 in phy config table*/
> + phy_config = get_phy_config(srds_s1, serdes1_phy_config,
> + ARRAY_SIZE(serdes1_phy_config));
> + if (!phy_config) {
> + printf("%s WRIOP: Unsupported SerDes1
> Protocol %d\n",
> + __func__, srds_s1);
> + } else {
> + do_phy_config(phy_config);
> + }
> + phy_config = get_phy_config(srds_s2, serdes2_phy_config,
> + ARRAY_SIZE(serdes2_phy_config));
> + if (!phy_config) {
> + printf("%s WRIOP: Unsupported SerDes2
> Protocol %d\n",
> + __func__, srds_s2);
> + } else {
> + do_phy_config(phy_config);
> + }
> + }
> +
> + if (wriop_get_enet_if(WRIOP1_DPMAC17) ==
> PHY_INTERFACE_MODE_RGMII_ID) {
> + wriop_set_phy_address(WRIOP1_DPMAC17, 0,
> RGMII_PHY_ADDR1);
> + bus = lx2162a_qds_mdio_init(EMI1, EMI1_RGMII1);
> + if (!bus)
> + printf("could not get bus for RGMII1\n");
> + else
> + wriop_set_mdio(WRIOP1_DPMAC17, bus);
> + }
> +
> + if (wriop_get_enet_if(WRIOP1_DPMAC18) ==
> PHY_INTERFACE_MODE_RGMII_ID) {
> + wriop_set_phy_address(WRIOP1_DPMAC18, 0,
> RGMII_PHY_ADDR2);
> + bus = lx2162a_qds_mdio_init(EMI1, EMI1_RGMII2);
> + if (!bus)
> + printf("could not get bus for RGMII2\n");
> + else
> + wriop_set_mdio(WRIOP1_DPMAC18, bus);
> + }
> +
> + cpu_eth_init(bis);
> +#endif /* CONFIG_FMAN_ENET */
> +#endif /* !CONFIG_DM_ETH */
> +
> +#ifdef CONFIG_PHY_AQUANTIA
> + /*
> + * Export functions to be used by AQ firmware
> + * upload application
> + */
> + gd->jt->strcpy = strcpy;
> + gd->jt->mdelay = mdelay;
> + gd->jt->mdio_get_current_dev = mdio_get_current_dev;
> + gd->jt->phy_find_by_mask = phy_find_by_mask;
> + gd->jt->mdio_phydev_for_ethname = mdio_phydev_for_ethname;
> + gd->jt->miiphy_set_current_dev = miiphy_set_current_dev;
> +#endif
> +
> +#ifdef CONFIG_DM_ETH
> + return 0;
> +#else
> + return pci_eth_init(bis);
> +#endif
> +}
> +
> +#if defined(CONFIG_RESET_PHY_R)
> +void reset_phy(void)
> +{
> +#if defined(CONFIG_FSL_MC_ENET)
> + mc_env_boot();
> +#endif
> +}
> +#endif /* CONFIG_RESET_PHY_R */
> +
> +#ifndef CONFIG_DM_ETH
> +#if defined(CONFIG_FSL_MC_ENET)
> +int fdt_fixup_dpmac_phy_handle(void *fdt, int dpmac_id, int node_phandle)
> +{
> + int offset;
> + int ret;
> + char dpmac_str[] = "dpmacs at 00";
> + const char *phy_string;
> +
> + offset = fdt_path_offset(fdt, "/soc/fsl-mc/dpmacs");
> +
> + if (offset < 0)
> + offset = fdt_path_offset(fdt, "/fsl-mc/dpmacs");
> +
> + if (offset < 0) {
> + printf("dpmacs node not found in device tree\n");
> + return offset;
> + }
> +
> + sprintf(dpmac_str, "dpmac@%x", dpmac_id);
> + debug("dpmac_str = %s\n", dpmac_str);
> +
> + offset = fdt_subnode_offset(fdt, offset, dpmac_str);
> + if (offset < 0) {
> + printf("%s node not found in device tree\n", dpmac_str);
> + return offset;
> + }
> +
> + phy_string = fdt_getprop(fdt, offset, "phy-connection-type", NULL);
> + if (is_backplane_mode(phy_string)) {
> + /* Backplane KR mode: skip fixups */
> + printf("Interface %d in backplane KR mode\n", dpmac_id);
> + return 0;
> + }
> +
> + ret = fdt_appendprop_cell(fdt, offset, "phy-handle", node_phandle);
> + if (ret)
> + printf("%d@%s %d\n", __LINE__, __func__, ret);
> +
> + phy_string = phy_string_for_interface(wriop_get_enet_if(dpmac_id));
> + ret = fdt_setprop_string(fdt, offset, "phy-connection-type",
> + phy_string);
> + if (ret)
> + printf("%d@%s %d\n", __LINE__, __func__, ret);
> +
> + return ret;
> +}
> +
> +int fdt_get_ioslot_offset(void *fdt, struct mii_dev *mii_dev, int fpga_offset)
> +{
> + char mdio_ioslot_str[] = "mdio at 00";
> + struct lx2162a_qds_mdio *priv;
> + u64 reg;
> + u32 phandle;
> + int offset, mux_val;
> +
> + /*Test if the MDIO bus is real mdio bus or muxing front end ?*/
> + if (strncmp(mii_dev->name, "LX2162A_QDS_MDIO",
> + strlen("LX2162A_QDS_MDIO")))
> + return -1;
> +
> + /*Get the real MDIO bus num and ioslot info from bus's priv data*/
> + priv = mii_dev->priv;
> +
> + debug("real_bus_num = %d, ioslot = %d\n",
> + priv->realbusnum, priv->ioslot);
> +
> + if (priv->realbusnum == EMI1)
> + reg = CONFIG_SYS_FSL_WRIOP1_MDIO1;
> + else
> + reg = CONFIG_SYS_FSL_WRIOP1_MDIO2;
> +
> + offset = fdt_node_offset_by_compat_reg(fdt, "fsl,fman-memac-mdio",
> reg);
> + if (offset < 0) {
> + printf("mdio@%llx node not found in device tree\n", reg);
> + return offset;
> + }
> +
> + phandle = fdt_get_phandle(fdt, offset);
> + phandle = cpu_to_fdt32(phandle);
> + offset = fdt_node_offset_by_prop_value(fdt, -1, "mdio-parent-bus",
> + &phandle, 4);
> + if (offset < 0) {
> + printf("mdio-mux-%d node not found in device tree\n",
> + priv->realbusnum == EMI1 ? 1 : 2);
> + return offset;
> + }
> +
> + mux_val = lx2162a_qds_get_mdio_mux_val(priv->realbusnum, priv-
> >ioslot);
> + if (priv->realbusnum == EMI1)
> + mux_val >>= BRDCFG4_EMI1SEL_SHIFT;
> + else
> + mux_val >>= BRDCFG4_EMI2SEL_SHIFT;
> + sprintf(mdio_ioslot_str, "mdio@%x", (u8)mux_val);
> +
> + offset = fdt_subnode_offset(fdt, offset, mdio_ioslot_str);
> + if (offset < 0) {
> + printf("%s node not found in device tree\n", mdio_ioslot_str);
> + return offset;
> + }
> +
> + return offset;
> +}
> +
> +int fdt_create_phy_node(void *fdt, int offset, u8 phyaddr, int *subnodeoffset,
> + struct phy_device *phy_dev, int phandle)
> +{
> + char phy_node_name[] = "ethernet-phy at 00";
> + char phy_id_compatible_str[] = "ethernet-phy-id0000.0000,";
> + int ret;
> +
> + sprintf(phy_node_name, "ethernet-phy@%x", phyaddr);
> + debug("phy_node_name = %s\n", phy_node_name);
> +
> + *subnodeoffset = fdt_add_subnode(fdt, offset, phy_node_name);
> + if (*subnodeoffset <= 0) {
> + printf("Could not add subnode %s inside node %s err = %s\n",
> + phy_node_name, fdt_get_name(fdt, offset, NULL),
> + fdt_strerror(*subnodeoffset));
> + return *subnodeoffset;
> + }
> +
> + sprintf(phy_id_compatible_str, "ethernet-phy-id%04x.%04x,",
> + phy_dev->phy_id >> 16, phy_dev->phy_id & 0xFFFF);
> + debug("phy_id_compatible_str %s\n", phy_id_compatible_str);
> +
> + ret = fdt_setprop_string(fdt, *subnodeoffset, "compatible",
> + phy_id_compatible_str);
> + if (ret) {
> + printf("%d@%s %d\n", __LINE__, __func__, ret);
> + goto out;
> + }
> +
> + if (phy_dev->is_c45) {
> + ret = fdt_appendprop_string(fdt, *subnodeoffset, "compatible",
> + "ethernet-phy-ieee802.3-c45");
> + if (ret) {
> + printf("%d@%s %d\n", __LINE__, __func__, ret);
> + goto out;
> + }
> + } else {
> + ret = fdt_appendprop_string(fdt, *subnodeoffset, "compatible",
> + "ethernet-phy-ieee802.3-c22");
> + if (ret) {
> + printf("%d@%s %d\n", __LINE__, __func__, ret);
> + goto out;
> + }
> + }
> +
> + ret = fdt_setprop_cell(fdt, *subnodeoffset, "reg", phyaddr);
> + if (ret) {
> + printf("%d@%s %d\n", __LINE__, __func__, ret);
> + goto out;
> + }
> +
> + ret = fdt_set_phandle(fdt, *subnodeoffset, phandle);
> + if (ret) {
> + printf("%d@%s %d\n", __LINE__, __func__, ret);
> + goto out;
> + }
> +
> +out:
> + if (ret)
> + fdt_del_node(fdt, *subnodeoffset);
> +
> + return ret;
> +}
> +
> +#define is_rgmii(dpmac_id) \
> + wriop_get_enet_if((dpmac_id)) == PHY_INTERFACE_MODE_RGMII_ID
> +
> +int fdt_fixup_board_phy(void *fdt)
> +{
> + int fpga_offset, offset, subnodeoffset;
> + struct mii_dev *mii_dev;
> + struct list_head *mii_devs, *entry;
> + int ret, dpmac_id, phandle, i;
> + struct phy_device *phy_dev;
> + char ethname[ETH_NAME_LEN];
> + phy_interface_t phy_iface;
> +
> + ret = 0;
> + /* we know FPGA is connected to i2c0, therefore search path directly,
> + * instead of compatible property, as it saves time
> + */
> + fpga_offset = fdt_path_offset(fdt, "/soc/i2c at 2000000/fpga");
> +
> + if (fpga_offset < 0)
> + fpga_offset = fdt_path_offset(fdt, "/i2c at 2000000/fpga");
> +
> + if (fpga_offset < 0) {
> + printf("i2c at 2000000/fpga node not found in device tree\n");
> + return fpga_offset;
> + }
> +
> + phandle = fdt_alloc_phandle(fdt);
> + mii_devs = mdio_get_list_head();
> +
> + list_for_each(entry, mii_devs) {
> + mii_dev = list_entry(entry, struct mii_dev, link);
> + debug("mii_dev name : %s\n", mii_dev->name);
> + offset = fdt_get_ioslot_offset(fdt, mii_dev, fpga_offset);
> + if (offset < 0)
> + continue;
> +
> + // Look for phy devices attached to MDIO bus muxing front end
> + // and create their entries with compatible being the device id
> + for (i = 0; i < PHY_MAX_ADDR; i++) {
> + phy_dev = mii_dev->phymap[i];
> + if (!phy_dev)
> + continue;
> +
> + // TODO: use sscanf instead of loop
> + dpmac_id = WRIOP1_DPMAC1;
> + while (dpmac_id < NUM_WRIOP_PORTS) {
> + phy_iface = wriop_get_enet_if(dpmac_id);
> + snprintf(ethname, ETH_NAME_LEN,
> "DPMAC%d@%s",
> + dpmac_id,
> + phy_string_for_interface(phy_iface));
> + if (strcmp(ethname, phy_dev->dev->name) == 0)
> + break;
> + dpmac_id++;
> + }
> + if (dpmac_id == NUM_WRIOP_PORTS)
> + continue;
> +
> + if ((dpmac_id == 17 || dpmac_id == 18) &&
> + is_rgmii(dpmac_id))
> + continue;
> +
> + ret = fdt_create_phy_node(fdt, offset, i,
> + &subnodeoffset,
> + phy_dev, phandle);
> + if (ret)
> + break;
> +
> + ret = fdt_fixup_dpmac_phy_handle(fdt,
> + dpmac_id, phandle);
> + if (ret) {
> + fdt_del_node(fdt, subnodeoffset);
> + break;
> + }
> + /* calculate offset again as new node addition may
> have
> + * changed offset;
> + */
> + offset = fdt_get_ioslot_offset(fdt, mii_dev,
> + fpga_offset);
> + phandle++;
> + }
> +
> + if (ret)
> + break;
> + }
> +
> + return ret;
> +}
> +#endif // CONFIG_FSL_MC_ENET
> +#endif
> +
> +#if defined(CONFIG_DM_ETH) && defined(CONFIG_MULTI_DTB_FIT)
> +
> +/* Structure to hold SERDES protocols supported in case of
> + * CONFIG_DM_ETH enabled (network interfaces are described in the DTS).
> + *
> + * @serdes_block: the index of the SERDES block
> + * @serdes_protocol: the decimal value of the protocol supported
> + * @dts_needed: DTS notes describing the current configuration are needed
> + *
> + * When dts_needed is true, the board_fit_config_name_match() function
> + * will try to exactly match the current configuration of the block with a DTS
> + * name provided.
> + */
> +static struct serdes_configuration {
> + u8 serdes_block;
> + u32 serdes_protocol;
> + bool dts_needed;
> +} supported_protocols[] = {
> + /* Serdes block #1 */
> + {1, 2, true},
> + {1, 3, true},
> + {1, 15, true},
> + {1, 17, true},
> + {1, 18, true},
> + {1, 20, true},
> +
> + /* Serdes block #2 */
> + {2, 2, false},
> + {2, 3, false},
> + {2, 5, false},
> + {2, 10, false},
> + {2, 11, true},
> + {2, 12, true},
> +};
> +
> +#define SUPPORTED_SERDES_PROTOCOLS ARRAY_SIZE(supported_protocols)
> +
> +static bool protocol_supported(u8 serdes_block, u32 protocol)
> +{
> + struct serdes_configuration serdes_conf;
> + int i;
> +
> + for (i = 0; i < SUPPORTED_SERDES_PROTOCOLS; i++) {
> + serdes_conf = supported_protocols[i];
> + if (serdes_conf.serdes_block == serdes_block &&
> + serdes_conf.serdes_protocol == protocol)
> + return true;
> + }
> +
> + return false;
> +}
> +
> +static void get_str_protocol(u8 serdes_block, u32 protocol, char *str)
> +{
> + struct serdes_configuration serdes_conf;
> + int i;
> +
> + for (i = 0; i < SUPPORTED_SERDES_PROTOCOLS; i++) {
> + serdes_conf = supported_protocols[i];
> + if (serdes_conf.serdes_block == serdes_block &&
> + serdes_conf.serdes_protocol == protocol) {
> + if (serdes_conf.dts_needed == true)
> + sprintf(str, "%u", protocol);
> + else
> + sprintf(str, "x");
> + return;
> + }
> + }
> +}
> +
> +int board_fit_config_name_match(const char *name)
> +{
> + struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
> + u32 rcw_status = in_le32(&gur->rcwsr[28]);
> + char srds_s1_str[2], srds_s2_str[2];
> + u32 srds_s1, srds_s2;
> + char expected_dts[100];
> +
> + srds_s1 = rcw_status & FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK;
> + srds_s1 >>= FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT;
> +
> + srds_s2 = rcw_status & FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK;
> + srds_s2 >>= FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT;
> +
> + /* Check for supported protocols. The default DTS will be used
> + * in this case
> + */
> + if (!protocol_supported(1, srds_s1) ||
> + !protocol_supported(2, srds_s2))
> + return -1;
> +
> + get_str_protocol(1, srds_s1, srds_s1_str);
> + get_str_protocol(2, srds_s2, srds_s2_str);
> +
> + sprintf(expected_dts, "fsl-lx2160a-qds-%s-%s",
> + srds_s1_str, srds_s2_str);
> +
> + if (!strcmp(name, expected_dts))
> + return 0;
> +
> + return -1;
> +}
> +#endif
> diff --git a/board/freescale/lx2160a/lx2160a.c
> b/board/freescale/lx2160a/lx2160a.c
> index 0ff987e..222906f 100644
> --- a/board/freescale/lx2160a/lx2160a.c
> +++ b/board/freescale/lx2160a/lx2160a.c
> @@ -32,12 +32,13 @@
> #include "../common/vid.h"
> #include <fsl_immap.h>
> #include <asm/arch-fsl-layerscape/fsl_icid.h>
> +#include "lx2160a.h"
>
> #ifdef CONFIG_EMC2305
> #include "../common/emc2305.h"
> #endif
>
> -#ifdef CONFIG_TARGET_LX2160AQDS
> +#if defined(CONFIG_TARGET_LX2160AQDS) ||
> defined(CONFIG_TARGET_LX2162AQDS)
> #define CFG_MUX_I2C_SDHC(reg, value) ((reg & 0x3f) | value)
> #define SET_CFG_MUX1_SDHC1_SDHC(reg) (reg & 0x3f)
> #define SET_CFG_MUX2_SDHC1_SPI(reg, value) ((reg & 0xcf) | value)
> @@ -47,7 +48,7 @@
> #define SDHC1_BASE_PMUX_DSPI 2
> #define SDHC2_BASE_PMUX_DSPI 2
> #define IIC5_PMUX_SPI3 3
> -#endif /* CONFIG_TARGET_LX2160AQDS */
> +#endif /* CONFIG_TARGET_LX2160AQDS or CONFIG_TARGET_LX2162AQDS */
>
> DECLARE_GLOBAL_DATA_PTR;
>
> @@ -191,7 +192,7 @@ int board_fix_fdt(void *fdt)
> }
> #endif
>
> -#if defined(CONFIG_TARGET_LX2160AQDS)
> +#if defined(CONFIG_TARGET_LX2160AQDS) ||
> defined(CONFIG_TARGET_LX2162AQDS)
> void esdhc_dspi_status_fixup(void *blob)
> {
> const char esdhc0_path[] = "/soc/esdhc at 2140000";
> @@ -259,7 +260,7 @@ void esdhc_dspi_status_fixup(void *blob)
>
> int esdhc_status_fixup(void *blob, const char *compat)
> {
> -#if defined(CONFIG_TARGET_LX2160AQDS)
> +#if defined(CONFIG_TARGET_LX2160AQDS) ||
> defined(CONFIG_TARGET_LX2162AQDS)
> /* Enable esdhc and dspi DT nodes based on RCW fields */
> esdhc_dspi_status_fixup(blob);
> #else
> @@ -297,7 +298,7 @@ int checkboard(void)
> enum boot_src src = get_boot_src();
> char buf[64];
> u8 sw;
> -#ifdef CONFIG_TARGET_LX2160AQDS
> +#if defined(CONFIG_TARGET_LX2160AQDS) ||
> defined(CONFIG_TARGET_LX2162AQDS)
> int clock;
> static const char *const freq[] = {"100", "125", "156.25",
> "161.13", "322.26", "", "", "",
> @@ -306,7 +307,7 @@ int checkboard(void)
> #endif
>
> cpu_name(buf);
> -#ifdef CONFIG_TARGET_LX2160AQDS
> +#if defined(CONFIG_TARGET_LX2160AQDS) ||
> defined(CONFIG_TARGET_LX2162AQDS)
> printf("Board: %s-QDS, ", buf);
> #else
> printf("Board: %s-RDB, ", buf);
> @@ -339,7 +340,13 @@ int checkboard(void)
> break;
> }
> }
> -#ifdef CONFIG_TARGET_LX2160AQDS
> +#if defined(CONFIG_TARGET_LX2160ARDB)
> + printf("FPGA: v%d.%d\n", QIXIS_READ(scver), QIXIS_READ(tagdata));
> +
> + puts("SERDES1 Reference: Clock1 = 161.13MHz Clock2 = 161.13MHz\n");
> + puts("SERDES2 Reference: Clock1 = 100MHz Clock2 = 100MHz\n");
> + puts("SERDES3 Reference: Clock1 = 100MHz Clock2 = 100MHz\n");
> +#else
> printf("FPGA: v%d (%s), build %d",
> (int)QIXIS_READ(scver), qixis_read_tag(buf),
> (int)qixis_read_minor());
> @@ -350,31 +357,27 @@ int checkboard(void)
> sw = QIXIS_READ(brdcfg[2]);
> clock = sw >> 4;
> printf("Clock1 = %sMHz ", freq[clock]);
> +#if defined(CONFIG_TARGET_LX2160AQDS)
> clock = sw & 0x0f;
> printf("Clock2 = %sMHz", freq[clock]);
> -
> +#endif
> sw = QIXIS_READ(brdcfg[3]);
> puts("\nSERDES2 Reference : ");
> clock = sw >> 4;
> printf("Clock1 = %sMHz ", freq[clock]);
> clock = sw & 0x0f;
> - printf("Clock2 = %sMHz", freq[clock]);
> -
> + printf("Clock2 = %sMHz\n", freq[clock]);
> +#if defined(CONFIG_TARGET_LX2160AQDS)
> sw = QIXIS_READ(brdcfg[12]);
> - puts("\nSERDES3 Reference : ");
> + puts("SERDES3 Reference : ");
> clock = sw >> 4;
> printf("Clock1 = %sMHz Clock2 = %sMHz\n", freq[clock], freq[clock]);
> -#else
> - printf("FPGA: v%d.%d\n", QIXIS_READ(scver), QIXIS_READ(tagdata));
> -
> - puts("SERDES1 Reference: Clock1 = 161.13MHz Clock2 = 161.13MHz\n");
> - puts("SERDES2 Reference: Clock1 = 100MHz Clock2 = 100MHz\n");
> - puts("SERDES3 Reference: Clock1 = 100MHz Clock2 = 100MHz\n");
> +#endif
> #endif
> return 0;
> }
>
> -#ifdef CONFIG_TARGET_LX2160AQDS
> +#if defined(CONFIG_TARGET_LX2160AQDS) ||
> defined(CONFIG_TARGET_LX2162AQDS)
> /*
> * implementation of CONFIG_ESDHC_DETECT_QUIRK Macro.
> */
> @@ -562,7 +565,7 @@ int config_board_mux(void)
>
> unsigned long get_board_sys_clk(void)
> {
> -#ifdef CONFIG_TARGET_LX2160AQDS
> +#if defined(CONFIG_TARGET_LX2160AQDS) ||
> defined(CONFIG_TARGET_LX2162AQDS)
> u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
>
> switch (sysclk_conf & 0x03) {
> @@ -581,7 +584,7 @@ unsigned long get_board_sys_clk(void)
>
> unsigned long get_board_ddr_clk(void)
> {
> -#ifdef CONFIG_TARGET_LX2160AQDS
> +#if defined(CONFIG_TARGET_LX2160AQDS) ||
> defined(CONFIG_TARGET_LX2162AQDS)
> u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
>
> switch ((ddrclk_conf & 0x30) >> 4) {
> diff --git a/board/freescale/lx2160a/lx2160a.h
> b/board/freescale/lx2160a/lx2160a.h
> new file mode 100644
> index 0000000..52b0207
> --- /dev/null
> +++ b/board/freescale/lx2160a/lx2160a.h
> @@ -0,0 +1,61 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright 2020 NXP
> + */
> +
> +#ifndef __LX2160_H
> +#define __LX2160_H
> +
> +#if defined(CONFIG_TARGET_LX2160AQDS) ||
> defined(CONFIG_TARGET_LX2162AQDS)
> +/* SYSCLK */
> +#define QIXIS_SYSCLK_100 0x0
> +#define QIXIS_SYSCLK_125 0x1
> +#define QIXIS_SYSCLK_133 0x2
> +
> +/* DDRCLK */
> +#define QIXIS_DDRCLK_100 0x0
> +#define QIXIS_DDRCLK_125 0x1
> +#define QIXIS_DDRCLK_133 0x2
> +
> +#define BRDCFG4_EMI1SEL_MASK 0xF8
> +#define BRDCFG4_EMI1SEL_SHIFT 3
> +#define BRDCFG4_EMI2SEL_MASK 0x07
> +#define BRDCFG4_EMI2SEL_SHIFT 0
> +#endif
> +
> +#define QIXIS_XMAP_SHIFT 5
> +
> +/* RTC */
> +#define I2C_MUX_CH_RTC 0xB
> +
> +/* MAC/PHY configuration */
> +#if defined(CONFIG_FSL_MC_ENET)
> +#if defined(CONFIG_TARGET_LX2160AQDS) ||
> defined(CONFIG_TARGET_LX2162AQDS)
> +#define AQ_PHY_ADDR1 0x00
> +#define AQ_PHY_ADDR2 0x01
> +#define AQ_PHY_ADDR3 0x02
> +#define AQ_PHY_ADDR4 0x03
> +#endif
> +
> +#ifdef CONFIG_TARGET_LX2160ARDB
> +#define AQR107_PHY_ADDR1 0x04
> +#define AQR107_PHY_ADDR2 0x05
> +#define AQR107_IRQ_MASK 0x0C
> +#endif
> +
> +#define CORTINA_PHY_ADDR1 0x0
> +#define INPHI_PHY_ADDR1 0x0
> +
> +#define RGMII_PHY_ADDR1 0x01
> +#define RGMII_PHY_ADDR2 0x02
> +
> +#if defined(CONFIG_TARGET_LX2160AQDS) ||
> defined(CONFIG_TARGET_LX2162AQDS)
> +#define INPHI_PHY_ADDR2 0x1
> +#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
> +#define SGMII_CARD_PORT2_PHY_ADDR 0x1D
> +#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
> +#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
> +#endif
> +#endif
> +
> +#endif /* __LX2160_H */
> diff --git a/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig
> b/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig
> new file mode 100644
> index 0000000..11fe33b
> --- /dev/null
> +++ b/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig
> @@ -0,0 +1,98 @@
> +CONFIG_ARM=y
> +CONFIG_TARGET_LX2162AQDS=y
> +CONFIG_TFABOOT=y
> +CONFIG_SYS_TEXT_BASE=0x82000000
> +CONFIG_SYS_MALLOC_F_LEN=0x6000
> +CONFIG_NXP_ESBC=y
> +CONFIG_ENV_SIZE=0x2000
> +CONFIG_ENV_SECT_SIZE=0x20000
> +CONFIG_ENV_OFFSET=0x500000
> +CONFIG_FSPI_AHB_EN_4BYTE=y
> +CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
> +CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
> +CONFIG_AHCI=y
> +CONFIG_NR_DRAM_BANKS=3
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_OF_BOARD_SETUP=y
> +CONFIG_OF_STDOUT_VIA_ALIAS=y
> +CONFIG_USE_BOOTARGS=y
> +CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0
> earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000
> default_hugepagesz=1024m hugepagesz=1024m hugepages=2
> pci=pcie_bus_perf"
> +# CONFIG_USE_BOOTCOMMAND is not set
> +CONFIG_MISC_INIT_R=y
> +CONFIG_BOARD_EARLY_INIT_R=y
> +CONFIG_CMD_GREPENV=y
> +CONFIG_CMD_EEPROM=y
> +CONFIG_CMD_DM=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_PCI=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_WDT=y
> +CONFIG_CMD_CACHE=y
> +CONFIG_MP=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_OF_BOARD_FIXUP=y
> +CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2162a-qds"
> +CONFIG_OF_LIST="fsl-lx2162a-qds-17-x fsl-lx2162a-qds-18-x fsl-lx2162a-qds-
> 20-x"
> +CONFIG_MULTI_DTB_FIT=y
> +CONFIG_ENV_OVERWRITE=y
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_ENV_IS_IN_SPI_FLASH=y
> +CONFIG_ENV_ADDR=0x20500000
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_DM=y
> +CONFIG_SATA_CEVA=y
> +CONFIG_DM_MMC=y
> +CONFIG_FSL_ESDHC=y
> +CONFIG_MTD=y
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_SPI_FLASH_EON=y
> +CONFIG_SPI_FLASH_SST=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SPI_FLASH_STMICRO=y
> +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
> +CONFIG_PHYLIB=y
> +CONFIG_PHY_AQUANTIA=y
> +CONFIG_PHY_CORTINA=y
> +CONFIG_SYS_CORTINA_NO_FW_UPLOAD=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_PHY_VITESSE=y
> +CONFIG_DM_ETH=y
> +CONFIG_DM_MDIO=y
> +CONFIG_DM_MDIO_MUX=y
> +CONFIG_E1000=y
> +CONFIG_MDIO_MUX_I2CREG=y
> +CONFIG_FSL_LS_MDIO=y
> +CONFIG_PCI=y
> +CONFIG_DM_PCI=y
> +CONFIG_DM_PCI_COMPAT=y
> +CONFIG_PCIE_LAYERSCAPE_RC=y
> +CONFIG_DM_SCSI=y
> +CONFIG_DM_SERIAL=y
> +CONFIG_SPI=y
> +CONFIG_DM_SPI=y
> +CONFIG_FSL_DSPI=y
> +CONFIG_NXP_FSPI=y
> +CONFIG_USB=y
> +CONFIG_DM_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_WDT=y
> +CONFIG_WDT_SBSA=y
> +CONFIG_RSA=y
> +CONFIG_SPL_RSA=y
> +CONFIG_RSA_SOFTWARE_EXP=y
> +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
> +CONFIG_GIC_V3_ITS=y
> +CONFIG_DM_I2C=y
> +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
> +CONFIG_I2C_DEFAULT_BUS_NUMBER=0
> +CONFIG_DM_RTC=y
> +CONFIG_DM_GPIO=y
> +CONFIG_CMD_DATE=y
> +CONFIG_RTC_PCF2127=y
> +CONFIG_I2C_MUX=y
> +CONFIG_I2C_MUX_PCA954x=y
> diff --git a/configs/lx2162aqds_tfa_defconfig
> b/configs/lx2162aqds_tfa_defconfig
> new file mode 100644
> index 0000000..ca74797
> --- /dev/null
> +++ b/configs/lx2162aqds_tfa_defconfig
> @@ -0,0 +1,96 @@
> +CONFIG_ARM=y
> +CONFIG_TARGET_LX2162AQDS=y
> +CONFIG_SYS_TEXT_BASE=0x82000000
> +CONFIG_SYS_MALLOC_F_LEN=0x6000
> +CONFIG_ENV_SIZE=0x2000
> +CONFIG_ENV_SECT_SIZE=0x20000
> +CONFIG_ENV_OFFSET=0x500000
> +CONFIG_FSPI_AHB_EN_4BYTE=y
> +CONFIG_TFABOOT=y
> +CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
> +CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
> +CONFIG_AHCI=y
> +CONFIG_NR_DRAM_BANKS=3
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_OF_BOARD_SETUP=y
> +CONFIG_OF_STDOUT_VIA_ALIAS=y
> +CONFIG_BOOTDELAY=10
> +CONFIG_USE_BOOTARGS=y
> +CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0
> earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000
> default_hugepagesz=1024m hugepagesz=1024m hugepages=2
> pci=pcie_bus_perf"
> +# CONFIG_USE_BOOTCOMMAND is not set
> +CONFIG_MISC_INIT_R=y
> +CONFIG_BOARD_EARLY_INIT_R=y
> +CONFIG_CMD_GREPENV=y
> +CONFIG_CMD_EEPROM=y
> +CONFIG_CMD_DM=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_PCI=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_WDT=y
> +CONFIG_CMD_CACHE=y
> +CONFIG_MP=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_OF_BOARD_FIXUP=y
> +CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2162a-qds"
> +CONFIG_OF_LIST="fsl-lx2162a-qds-17-x fsl-lx2162a-qds-18-x fsl-lx2162a-qds-
> 20-x"
> +CONFIG_MULTI_DTB_FIT=y
> +CONFIG_ENV_OVERWRITE=y
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_ENV_IS_IN_SPI_FLASH=y
> +CONFIG_ENV_ADDR=0x20500000
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_DM=y
> +CONFIG_SATA_CEVA=y
> +CONFIG_FSL_CAAM=y
> +CONFIG_DM_MMC=y
> +CONFIG_FSL_ESDHC=y
> +CONFIG_MTD=y
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_SPI_FLASH_EON=y
> +CONFIG_SPI_FLASH_SST=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SPI_FLASH_STMICRO=y
> +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
> +CONFIG_PHYLIB=y
> +CONFIG_PHY_AQUANTIA=y
> +CONFIG_PHY_CORTINA=y
> +CONFIG_SYS_CORTINA_NO_FW_UPLOAD=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_PHY_VITESSE=y
> +CONFIG_DM_ETH=y
> +CONFIG_DM_MDIO=y
> +CONFIG_DM_MDIO_MUX=y
> +CONFIG_E1000=y
> +CONFIG_MDIO_MUX_I2CREG=y
> +CONFIG_FSL_LS_MDIO=y
> +CONFIG_PCI=y
> +CONFIG_DM_PCI=y
> +CONFIG_DM_PCI_COMPAT=y
> +CONFIG_PCIE_LAYERSCAPE_RC=y
> +CONFIG_DM_SCSI=y
> +CONFIG_DM_SERIAL=y
> +CONFIG_SPI=y
> +CONFIG_DM_SPI=y
> +CONFIG_FSL_DSPI=y
> +CONFIG_NXP_FSPI=y
> +CONFIG_USB=y
> +CONFIG_DM_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_WDT=y
> +CONFIG_WDT_SBSA=y
> +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
> +CONFIG_GIC_V3_ITS=y
> +CONFIG_DM_I2C=y
> +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
> +CONFIG_I2C_DEFAULT_BUS_NUMBER=0
> +CONFIG_DM_RTC=y
> +CONFIG_DM_GPIO=y
> +CONFIG_CMD_DATE=y
> +CONFIG_RTC_PCF2127=y
> +CONFIG_I2C_MUX=y
> +CONFIG_I2C_MUX_PCA954x=y
> diff --git a/configs/lx2162aqds_tfa_verified_boot_defconfig
> b/configs/lx2162aqds_tfa_verified_boot_defconfig
> new file mode 100644
> index 0000000..1199b6c
> --- /dev/null
> +++ b/configs/lx2162aqds_tfa_verified_boot_defconfig
> @@ -0,0 +1,103 @@
> +CONFIG_ARM=y
> +CONFIG_TARGET_LX2162AQDS=y
> +CONFIG_SYS_TEXT_BASE=0x82000000
> +CONFIG_SYS_MALLOC_F_LEN=0x6000
> +CONFIG_ENV_SIZE=0x2000
> +CONFIG_ENV_SECT_SIZE=0x20000
> +CONFIG_ENV_OFFSET=0x500000
> +CONFIG_FSPI_AHB_EN_4BYTE=y
> +CONFIG_TFABOOT=y
> +CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
> +CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
> +CONFIG_AHCI=y
> +CONFIG_NR_DRAM_BANKS=3
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_FIT_SIGNATURE=y
> +CONFIG_RSA=y
> +CONFIG_OF_BOARD_SETUP=y
> +CONFIG_OF_STDOUT_VIA_ALIAS=y
> +CONFIG_BOOTDELAY=10
> +CONFIG_USE_BOOTARGS=y
> +CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0
> earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000
> default_hugepagesz=1024m hugepagesz=1024m hugepages=2
> pci=pcie_bus_perf"
> +# CONFIG_USE_BOOTCOMMAND is not set
> +CONFIG_MISC_INIT_R=y
> +CONFIG_BOARD_EARLY_INIT_R=y
> +CONFIG_CMD_GREPENV=y
> +CONFIG_CMD_EEPROM=y
> +CONFIG_CMD_DM=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_PCI=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_WDT=y
> +CONFIG_CMD_CACHE=y
> +CONFIG_MP=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_OF_BOARD_FIXUP=y
> +CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2162a-qds"
> +CONFIG_OF_LIST="fsl-lx2162a-qds-17-x fsl-lx2162a-qds-18-x fsl-lx2162a-qds-
> 20-x"
> +CONFIG_MULTI_DTB_FIT=y
> +CONFIG_ENV_OVERWRITE=y
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_ENV_IS_IN_SPI_FLASH=y
> +CONFIG_ENV_ADDR=0x20500000
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_DM=y
> +CONFIG_SATA_CEVA=y
> +CONFIG_FSL_CAAM=y
> +CONFIG_DM_MMC=y
> +CONFIG_FSL_ESDHC=y
> +CONFIG_MTD=y
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_SPI_FLASH_EON=y
> +CONFIG_SPI_FLASH_SST=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SPI_FLASH_STMICRO=y
> +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
> +CONFIG_PHYLIB=y
> +CONFIG_PHY_AQUANTIA=y
> +CONFIG_PHY_CORTINA=y
> +CONFIG_SYS_CORTINA_NO_FW_UPLOAD=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_PHY_VITESSE=y
> +CONFIG_DM_ETH=y
> +CONFIG_DM_MDIO=y
> +CONFIG_DM_MDIO_MUX=y
> +CONFIG_E1000=y
> +CONFIG_MDIO_MUX_I2CREG=y
> +CONFIG_FSL_LS_MDIO=y
> +CONFIG_PCI=y
> +CONFIG_DM_PCI=y
> +CONFIG_DM_PCI_COMPAT=y
> +CONFIG_PCIE_LAYERSCAPE_RC=y
> +CONFIG_DM_SCSI=y
> +CONFIG_DM_SERIAL=y
> +CONFIG_SPI=y
> +CONFIG_DM_SPI=y
> +CONFIG_FSL_DSPI=y
> +CONFIG_NXP_FSPI=y
> +CONFIG_USB=y
> +CONFIG_DM_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_WDT=y
> +CONFIG_WDT_SBSA=y
> +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
> +CONFIG_GIC_V3_ITS=y
> +CONFIG_DM_I2C=y
> +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
> +CONFIG_I2C_DEFAULT_BUS_NUMBER=0
> +CONFIG_DM_RTC=y
> +CONFIG_DM_GPIO=y
> +CONFIG_CMD_DATE=y
> +CONFIG_RTC_PCF2127=y
> +CONFIG_I2C_MUX=y
> +CONFIG_I2C_MUX_PCA954x=y
> +CONFIG_TEE=y
> +CONFIG_OPTEE=y
> +CONFIG_CMD_OPTEE_RPMB=y
> +CONFIG_OPTEE_TA_AVB=y
> +CONFIG_SUPPORT_EMMC_RPMB=y
> diff --git a/include/configs/lx2160a_common.h
> b/include/configs/lx2160a_common.h
> index 0017ac5..837760f 100644
> --- a/include/configs/lx2160a_common.h
> +++ b/include/configs/lx2160a_common.h
> @@ -149,8 +149,10 @@
> /* USB */
> #ifdef CONFIG_USB
> #define CONFIG_HAS_FSL_XHCI_USB
> +#ifndef CONFIG_TARGET_LX2162AQDS
> #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
> #endif
> +#endif
>
> /* FlexSPI */
> #ifdef CONFIG_NXP_FSPI
> diff --git a/include/configs/lx2160aqds.h b/include/configs/lx2160aqds.h
> index 12884bc..ea1b163 100644
> --- a/include/configs/lx2160aqds.h
> +++ b/include/configs/lx2160aqds.h
> @@ -8,70 +8,14 @@
>
> #include "lx2160a_common.h"
>
> -/* Qixis */
> -#define QIXIS_XMAP_MASK 0x07
> -#define QIXIS_XMAP_SHIFT 5
> -#define QIXIS_RST_CTL_RESET_EN 0x30
> -#define QIXIS_LBMAP_DFLTBANK 0x00
> -#define QIXIS_LBMAP_ALTBANK 0x20
> -#define QIXIS_LBMAP_QSPI 0x00
> -#define QIXIS_RCW_SRC_QSPI 0xff
> -#define QIXIS_RST_CTL_RESET 0x31
> -#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
> -#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
> -#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
> -#define QIXIS_LBMAP_MASK 0x0f
> -#define QIXIS_LBMAP_SD
> -#define QIXIS_LBMAP_EMMC
> -#define QIXIS_RCW_SRC_SD 0x08
> -#define QIXIS_RCW_SRC_EMMC 0x09
> -#define NON_EXTENDED_DUTCFG
> -#define QIXIS_SDID_MASK 0x07
> -#define QIXIS_ESDHC_NO_ADAPTER 0x7
> -
> -/* SYSCLK */
> -#define QIXIS_SYSCLK_100 0x0
> -#define QIXIS_SYSCLK_125 0x1
> -#define QIXIS_SYSCLK_133 0x2
> -
> -/* DDRCLK */
> -#define QIXIS_DDRCLK_100 0x0
> -#define QIXIS_DDRCLK_125 0x1
> -#define QIXIS_DDRCLK_133 0x2
> -
> -#define BRDCFG4_EMI1SEL_MASK 0xF8
> -#define BRDCFG4_EMI1SEL_SHIFT 3
> -#define BRDCFG4_EMI2SEL_MASK 0x07
> -#define BRDCFG4_EMI2SEL_SHIFT 0
> -
> /* VID */
> -
> -#define I2C_MUX_CH_VOL_MONITOR 0xA
> -/* Voltage monitor on channel 2*/
> -#define I2C_VOL_MONITOR_ADDR 0x63
> -#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2
> -#define I2C_VOL_MONITOR_BUS_V_OVF 0x1
> -#define I2C_VOL_MONITOR_BUS_V_SHIFT 3
> #define CONFIG_VID_FLS_ENV "lx2160aqds_vdd_mv"
> #define CONFIG_VID
> -
> -/* The lowest and highest voltage allowed*/
> -#define VDD_MV_MIN 775
> -#define VDD_MV_MAX 925
> -
> -/* PM Bus commands code for LTC3882*/
> -#define PMBUS_CMD_PAGE 0x0
> -#define PMBUS_CMD_READ_VOUT 0x8B
> -#define PMBUS_CMD_PAGE_PLUS_WRITE 0x05
> -#define PMBUS_CMD_VOUT_COMMAND 0x21
> -#define PWM_CHANNEL0 0x0
> -
> #define CONFIG_VOL_MONITOR_LTC3882_SET
> #define CONFIG_VOL_MONITOR_LTC3882_READ
>
> /* RTC */
> #define CONFIG_SYS_RTC_BUS_NUM 0
> -#define I2C_MUX_CH_RTC 0xB
>
> /*
> * MMC
> @@ -87,25 +31,6 @@ u8 qixis_esdhc_detect_quirk(void);
> #if defined(CONFIG_FSL_MC_ENET)
> #define CONFIG_MII
> #define CONFIG_ETHPRIME "DPMAC17 at rgmii-id"
> -
> -#define AQ_PHY_ADDR1 0x00
> -#define AQ_PHY_ADDR2 0x01
> -#define AQ_PHY_ADDR3 0x02
> -#define AQ_PHY_ADDR4 0x03
> -
> -#define CORTINA_PHY_ADDR1 0x0
> -
> -#define INPHI_PHY_ADDR1 0x0
> -#define INPHI_PHY_ADDR2 0x1
> -
> -#define RGMII_PHY_ADDR1 0x01
> -#define RGMII_PHY_ADDR2 0x02
> -
> -#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
> -#define SGMII_CARD_PORT2_PHY_ADDR 0x1D
> -#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
> -#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
> -
> #endif
>
> /* EEPROM */
> diff --git a/include/configs/lx2160ardb.h b/include/configs/lx2160ardb.h
> index 59c2305..097f122 100644
> --- a/include/configs/lx2160ardb.h
> +++ b/include/configs/lx2160ardb.h
> @@ -8,47 +8,9 @@
>
> #include "lx2160a_common.h"
>
> -/* Qixis */
> -#define QIXIS_XMAP_MASK 0x07
> -#define QIXIS_XMAP_SHIFT 5
> -#define QIXIS_RST_CTL_RESET_EN 0x30
> -#define QIXIS_LBMAP_DFLTBANK 0x00
> -#define QIXIS_LBMAP_ALTBANK 0x20
> -#define QIXIS_LBMAP_QSPI 0x00
> -#define QIXIS_RCW_SRC_QSPI 0xff
> -#define QIXIS_RST_CTL_RESET 0x31
> -#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
> -#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
> -#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
> -#define QIXIS_LBMAP_MASK 0x0f
> -#define QIXIS_LBMAP_SD
> -#define QIXIS_LBMAP_EMMC
> -#define QIXIS_RCW_SRC_SD 0x08
> -#define QIXIS_RCW_SRC_EMMC 0x09
> -#define NON_EXTENDED_DUTCFG
> -
> /* VID */
> -
> -#define I2C_MUX_CH_VOL_MONITOR 0xA
> -/* Voltage monitor on channel 2*/
> -#define I2C_VOL_MONITOR_ADDR 0x63
> -#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2
> -#define I2C_VOL_MONITOR_BUS_V_OVF 0x1
> -#define I2C_VOL_MONITOR_BUS_V_SHIFT 3
> #define CONFIG_VID_FLS_ENV "lx2160ardb_vdd_mv"
> #define CONFIG_VID
> -
> -/* The lowest and highest voltage allowed*/
> -#define VDD_MV_MIN 775
> -#define VDD_MV_MAX 855
> -
> -/* PM Bus commands code for LTC3882*/
> -#define PMBUS_CMD_PAGE 0x0
> -#define PMBUS_CMD_READ_VOUT 0x8B
> -#define PMBUS_CMD_PAGE_PLUS_WRITE 0x05
> -#define PMBUS_CMD_VOUT_COMMAND 0x21
> -#define PWM_CHANNEL0 0x0
> -
> #define CONFIG_VOL_MONITOR_LTC3882_SET
> #define CONFIG_VOL_MONITOR_LTC3882_READ
>
> @@ -59,17 +21,6 @@
> #if defined(CONFIG_FSL_MC_ENET)
> #define CONFIG_MII
> #define CONFIG_ETHPRIME "DPMAC1 at xgmii"
> -
> -#define AQR107_PHY_ADDR1 0x04
> -#define AQR107_PHY_ADDR2 0x05
> -#define AQR107_IRQ_MASK 0x0C
> -
> -#define CORTINA_PHY_ADDR1 0x0
> -#define INPHI_PHY_ADDR1 0x0
> -
> -#define RGMII_PHY_ADDR1 0x01
> -#define RGMII_PHY_ADDR2 0x02
> -
> #endif
>
> /* EMC2305 */
> diff --git a/include/configs/lx2162aqds.h b/include/configs/lx2162aqds.h
> new file mode 100644
> index 0000000..847534c
> --- /dev/null
> +++ b/include/configs/lx2162aqds.h
> @@ -0,0 +1,78 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright 2020 NXP
> + */
> +
> +#ifndef __LX2162_QDS_H
> +#define __LX2162_QDS_H
> +
> +#include "lx2160a_common.h"
> +
> +/* USB */
> +#undef CONFIG_USB_MAX_CONTROLLER_COUNT
> +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
> +
> +/* Voltage monitor on channel 2*/
> +#define CONFIG_VID_FLS_ENV "lx2162aqds_vdd_mv"
> +#define CONFIG_VID
> +#define CONFIG_VOL_MONITOR_LTC3882_SET
> +#define CONFIG_VOL_MONITOR_LTC3882_READ
> +
> +/* RTC */
> +#define CONFIG_SYS_RTC_BUS_NUM 0
> +
> +/*
> + * MMC
> + */
> +#ifdef CONFIG_MMC
> +#ifndef __ASSEMBLY__
> +u8 qixis_esdhc_detect_quirk(void);
> +#endif
> +#define CONFIG_ESDHC_DETECT_QUIRK qixis_esdhc_detect_quirk()
> +#endif
> +
> +/* MAC/PHY configuration */
> +#if defined(CONFIG_FSL_MC_ENET)
> +#define CONFIG_MII
> +#define CONFIG_ETHPRIME "DPMAC17 at rgmii-id"
> +#endif
> +
> +/* EEPROM */
> +#define CONFIG_ID_EEPROM
> +#define CONFIG_SYS_I2C_EEPROM_NXID
> +#define CONFIG_SYS_EEPROM_BUS_NUM 0
> +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
> +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
> +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
> +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
> +
> +/* Initial environment variables */
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + EXTRA_ENV_SETTINGS \
> + "boot_scripts=lx2162aqds_boot.scr\0" \
> + "boot_script_hdr=hdr_lx2162aqds_bs.out\0" \
> + "BOARD=lx2162aqds\0" \
> + "xspi_bootcmd=echo Trying load from flexspi..;" \
> + "sf probe 0:0 && sf read $load_addr " \
> + "$kernel_start $kernel_size ; env exists secureboot &&" \
> + "sf read $kernelheader_addr_r $kernelheader_start " \
> + "$kernelheader_size && esbc_validate ${kernelheader_addr_r};
> "\
> + " bootm $load_addr#$BOARD\0" \
> + "sd_bootcmd=echo Trying load from sd card..;" \
> + "mmc dev 0; mmcinfo; mmc read $load_addr "
> \
> + "$kernel_addr_sd $kernel_size_sd ;" \
> + "env exists secureboot && mmc read $kernelheader_addr_r "\
> + "$kernelhdr_addr_sd $kernelhdr_size_sd " \
> + " && esbc_validate ${kernelheader_addr_r};" \
> + "bootm $load_addr#$BOARD\0" \
> + "emmc_bootcmd=echo Trying load from emmc card..;" \
> + "mmc dev 1; mmcinfo; mmc read $load_addr " \
> + "$kernel_addr_sd $kernel_size_sd ;" \
> + "env exists secureboot && mmc read $kernelheader_addr_r "\
> + "$kernelhdr_addr_sd $kernelhdr_size_sd " \
> + " && esbc_validate ${kernelheader_addr_r};" \
> + "bootm $load_addr#$BOARD\0"
> +
> +#include <asm/fsl_secure_boot.h>
> +
> +#endif /* __LX2162_QDS_H */
> --
> 2.7.4
More information about the U-Boot
mailing list