[v2] net: pfe_eth: read PFE ESBC header flash with spi_flash_read API
Biwen Li
biwen.li at oss.nxp.com
Thu Nov 5 09:12:25 CET 2020
From: Biwen Li <biwen.li at nxp.com>
Read PFE ESBC header flash with spi_flash_read API
- logs as follows,
Net: SF: Detected s25fs512s with page size 256 Bytes, erase size 256
KiB, total 64 MiB
"Synchronous Abort" handler, esr 0x96000210
elr: 000000008206db44 lr : 0000000082004ea0 (reloc)
elr: 00000000b7ba6b44 lr : 00000000b7b3dea0
x0 : 00000000b79407e8 x1 : 0000000040640000
x2 : 0000000000000050 x3 : 0000000000000000
x4 : 000000000000000a x5 : 0000000000000050
x6 : 0000000000000366 x7 : 00000000b7942308
x8 : 00000000b76407c0 x9 : 0000000000000008
x10: 0000000000000044 x11: 00000000b7634d1c
x12: 000000000000004f x13: 0000000000000044
x14: 00000000b7634d98 x15: 00000000b76407c0
x16: 0000000000000000 x17: 0000000000000000
x18: 00000000b7636dd8 x19: 0000000000000000
x20: 00000000b79407d0 x21: 00000000b79407e8
x22: 0000000040640000 x23: 00000000b7634e58
x24: 0000000000000000 x25: 0000000003800000
x26: 00000000b7bdd000 x27: 0000000000000000
x28: 0000000000000000 x29: 00000000b7634d10
Code: d2800003 eb03005f 54000101 d65f03c0 (f8636826)
Resetting CPU ...
Signed-off-by: Biwen Li <biwen.li at nxp.com>
---
Change in v2:
- update subject and description
board/freescale/ls1012afrdm/Kconfig | 11 +++++
board/freescale/ls1012aqds/Kconfig | 14 +++++--
board/freescale/ls1012ardb/Kconfig | 18 +++++++--
drivers/net/pfe_eth/pfe_firmware.c | 62 +++++++++++++++++++++++++----
4 files changed, 92 insertions(+), 13 deletions(-)
diff --git a/board/freescale/ls1012afrdm/Kconfig b/board/freescale/ls1012afrdm/Kconfig
index 55b414e168..4ac69d7117 100644
--- a/board/freescale/ls1012afrdm/Kconfig
+++ b/board/freescale/ls1012afrdm/Kconfig
@@ -16,6 +16,10 @@ config SYS_LS_PFE_FW_ADDR
hex "Flash address of PFE firmware"
default 0x40a00000
+config SYS_LS_PFE_FW_LENGTH
+ hex "length of PFE firmware"
+ default 0x40000
+
config SYS_LS_PPA_FW_ADDR
hex "PPA Firmware Addr"
default 0x40400000
@@ -65,6 +69,10 @@ config SYS_LS_PFE_FW_ADDR
hex "Flash address of PFE firmware"
default 0x40020000
+config SYS_LS_PFE_FW_LENGTH
+ hex "length of PFE firmware"
+ default 0x40000
+
config SYS_LS_PPA_FW_ADDR
hex "PPA Firmware Addr"
default 0x40060000
@@ -77,6 +85,9 @@ config SYS_LS_PFE_ESBC_ADDR
hex "PFE Firmware HDR Addr"
default 0x401f8000
+config SYS_LS_PFE_ESBC_LENGTH
+ hex "length of PFE Firmware HDR"
+ default 0xc00
endif
if TARGET_LS1012AFRDM || TARGET_LS1012AFRWY
diff --git a/board/freescale/ls1012aqds/Kconfig b/board/freescale/ls1012aqds/Kconfig
index 8844557aae..59b1a87665 100644
--- a/board/freescale/ls1012aqds/Kconfig
+++ b/board/freescale/ls1012aqds/Kconfig
@@ -20,6 +20,14 @@ if CHAIN_OF_TRUST
config SYS_LS_PPA_ESBC_ADDR
hex "PPA Firmware HDR Addr"
default 0x40680000
+
+config SYS_LS_PFE_ESBC_ADDR
+ hex "PFE Firmware HDR Addr"
+ default 0x40700000
+
+config SYS_LS_PFE_ESBC_LENGTH
+ hex "length of PFE Firmware HDR"
+ default 0xc00
endif
if FSL_PFE
@@ -39,9 +47,9 @@ config SYS_LS_PFE_FW_ADDR
hex "Flash address of PFE firmware"
default 0x40a00000
-config SYS_LS_PFE_ESBC_ADDR
- hex "PFE Firmware HDR Addr"
- default 0x40700000
+config SYS_LS_PFE_FW_LENGTH
+ hex "length of PFE firmware"
+ default 0x300000
config DDR_PFE_PHYS_BASEADDR
hex "PFE DDR physical base address"
diff --git a/board/freescale/ls1012ardb/Kconfig b/board/freescale/ls1012ardb/Kconfig
index 5a2fa91f6b..c4acea3ae2 100644
--- a/board/freescale/ls1012ardb/Kconfig
+++ b/board/freescale/ls1012ardb/Kconfig
@@ -20,6 +20,14 @@ if CHAIN_OF_TRUST
config SYS_LS_PPA_ESBC_ADDR
hex "PPA Firmware HDR Addr"
default 0x40680000
+
+config SYS_LS_PFE_ESBC_ADDR
+ hex "PFE Firmware HDR Addr"
+ default 0x40640000
+
+config SYS_LS_PFE_ESBC_LENGTH
+ hex "length of PFE Firmware HDR"
+ default 0xc00
endif
if FSL_PFE
@@ -33,9 +41,9 @@ config SYS_LS_PFE_FW_ADDR
hex "Flash address of PFE firmware"
default 0x40a00000
-config SYS_LS_PFE_ESBC_ADDR
- hex "PFE Firmware HDR Addr"
- default 0x40640000
+config SYS_LS_PFE_FW_LENGTH
+ hex "length of PFE firmware"
+ default 0x300000
config DDR_PFE_PHYS_BASEADDR
hex "PFE DDR physical base address"
@@ -89,6 +97,10 @@ config SYS_LS_PFE_FW_ADDR
hex "Flash address of PFE firmware"
default 0x40a00000
+config SYS_LS_PFE_FW_LENGTH
+ hex "length of PFE firmware"
+ default 0x300000
+
config DDR_PFE_PHYS_BASEADDR
hex "PFE DDR physical base address"
default 0x03800000
diff --git a/drivers/net/pfe_eth/pfe_firmware.c b/drivers/net/pfe_eth/pfe_firmware.c
index d414c750d4..d6718822b2 100644
--- a/drivers/net/pfe_eth/pfe_firmware.c
+++ b/drivers/net/pfe_eth/pfe_firmware.c
@@ -24,6 +24,9 @@
#define PFE_FIRMWARE_FIT_CNF_NAME "config at 1"
static const void *pfe_fit_addr;
+#ifdef CONFIG_CHAIN_OF_TRUST
+static const void *pfe_esbc_hdr_addr;
+#endif
/*
* PFE elf firmware loader.
@@ -166,10 +169,10 @@ static int pfe_fit_check(void)
int pfe_spi_flash_init(void)
{
- struct spi_flash *pfe_flash;
+ struct spi_flash *pfe_flash = NULL;
struct udevice *new;
int ret = 0;
- void *addr = malloc(CONFIG_SYS_QE_FMAN_FW_LENGTH);
+ void *addr = malloc(CONFIG_SYS_LS_PFE_FW_LENGTH);
if (!addr)
return -ENOMEM;
@@ -179,24 +182,69 @@ int pfe_spi_flash_init(void)
CONFIG_ENV_SPI_MAX_HZ,
CONFIG_ENV_SPI_MODE,
&new);
+ if (ret) {
+ printf("SF: failed to probe spi\n");
+ goto exit1;
+ }
+
pfe_flash = dev_get_uclass_priv(new);
if (!pfe_flash) {
printf("SF: probe for pfe failed\n");
- free(addr);
- return -ENODEV;
+ ret = -ENODEV;
+ goto exit1;
}
ret = spi_flash_read(pfe_flash,
CONFIG_SYS_LS_PFE_FW_ADDR,
- CONFIG_SYS_QE_FMAN_FW_LENGTH,
+ CONFIG_SYS_LS_PFE_FW_LENGTH,
addr);
- if (ret)
+ if (ret) {
printf("SF: read for pfe failed\n");
+ goto exit1;
+ }
+
+#ifdef CONFIG_CHAIN_OF_TRUST
+ void *hdr_addr = malloc(CONFIG_SYS_LS_PFE_ESBC_LENGTH);
+
+ if (!hdr_addr) {
+ ret = -ENOMEM;
+ goto exit1;
+ }
+ ret = spi_flash_read(pfe_flash,
+ CONFIG_SYS_LS_PFE_ESBC_ADDR,
+ CONFIG_SYS_LS_PFE_ESBC_LENGTH,
+ hdr_addr);
+ if (ret) {
+ printf("SF: failed to read pfe esbc header\n");
+ goto exit2;
+ }
+
+ pfe_esbc_hdr_addr = hdr_addr;
+#endif
pfe_fit_addr = addr;
spi_flash_free(pfe_flash);
+ goto exit;
+#ifdef CONFIG_CHAIN_OF_TRUST
+exit2:
+ if (hdr_addr) {
+ free(hdr_addr);
+ hdr_addr = NULL;
+ }
+#endif
+exit1:
+ if (addr) {
+ free(addr);
+ addr = NULL;
+ }
+exit:
+ if (pfe_flash) {
+ spi_flash_free(pfe_flash);
+ pfe_flash = NULL;
+ }
+
return ret;
}
@@ -233,7 +281,7 @@ int pfe_firmware_init(void)
goto err;
#ifdef CONFIG_CHAIN_OF_TRUST
- pfe_esbc_hdr = CONFIG_SYS_LS_PFE_ESBC_ADDR;
+ pfe_esbc_hdr = (uintptr_t)pfe_esbc_hdr_addr;
pfe_img_addr = (uintptr_t)pfe_fit_addr;
if (fsl_check_boot_mode_secure() != 0) {
/*
--
2.17.1
More information about the U-Boot
mailing list