[PATCH 09/18] common: board_r: Drop initr_pci wrapper
Ovidiu Panait
ovidiu.panait at windriver.com
Thu Nov 5 10:09:46 CET 2020
Add a return value to pci_init and use it directly in the post-relocation
init sequence, rather than using a wrapper stub.
Signed-off-by: Ovidiu Panait <ovidiu.panait at windriver.com>
---
common/board_r.c | 18 ++++--------------
drivers/pci/pci-uclass.c | 4 +++-
drivers/pci/pci.c | 6 ++++--
include/init.h | 2 +-
4 files changed, 12 insertions(+), 18 deletions(-)
diff --git a/common/board_r.c b/common/board_r.c
index d86ff0cb5e..414b6272c5 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -214,16 +214,6 @@ static int initr_unlock_ram_in_cache(void)
}
#endif
-#ifdef CONFIG_PCI
-static int initr_pci(void)
-{
- if (IS_ENABLED(CONFIG_PCI_INIT_R))
- pci_init();
-
- return 0;
-}
-#endif
-
static int initr_barrier(void)
{
#ifdef CONFIG_PPC
@@ -732,12 +722,12 @@ static init_fnc_t init_sequence_r[] = {
post_output_backlog,
#endif
INIT_FUNC_WATCHDOG_RESET
-#if defined(CONFIG_PCI) && defined(CONFIG_SYS_EARLY_PCI_INIT)
+#if defined(CONFIG_PCI_INIT_R) && defined(CONFIG_SYS_EARLY_PCI_INIT)
/*
* Do early PCI configuration _before_ the flash gets initialised,
* because PCU resources are crucial for flash access on some boards.
*/
- initr_pci,
+ pci_init,
#endif
#ifdef CONFIG_ARCH_EARLY_INIT_R
arch_early_init_r,
@@ -776,11 +766,11 @@ static init_fnc_t init_sequence_r[] = {
mac_read_from_eeprom,
#endif
INIT_FUNC_WATCHDOG_RESET
-#if defined(CONFIG_PCI) && !defined(CONFIG_SYS_EARLY_PCI_INIT)
+#if defined(CONFIG_PCI_INIT_R) && !defined(CONFIG_SYS_EARLY_PCI_INIT)
/*
* Do pci configuration
*/
- initr_pci,
+ pci_init,
#endif
stdio_add_devices,
initr_jumptable,
diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c
index eb07d25301..7e9b5cf0fa 100644
--- a/drivers/pci/pci-uclass.c
+++ b/drivers/pci/pci-uclass.c
@@ -1834,7 +1834,7 @@ U_BOOT_DRIVER(pci_generic_drv) = {
.of_match = pci_generic_ids,
};
-void pci_init(void)
+int pci_init(void)
{
struct udevice *bus;
@@ -1847,4 +1847,6 @@ void pci_init(void)
uclass_next_device_check(&bus)) {
;
}
+
+ return 0;
}
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 664e8379eb..a7453e5755 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -454,16 +454,18 @@ int pci_hose_scan(struct pci_controller *hose)
return pci_hose_scan_bus(hose, hose->current_busno);
}
-void pci_init(void)
+int pci_init(void)
{
hose_head = NULL;
/* allow env to disable pci init/enum */
if (env_get("pcidisable") != NULL)
- return;
+ return 0;
/* now call board specific pci_init()... */
pci_init_board();
+
+ return 0;
}
/* Returns the address of the requested capability structure within the
diff --git a/include/init.h b/include/init.h
index a887c2b4fc..5519562163 100644
--- a/include/init.h
+++ b/include/init.h
@@ -234,7 +234,7 @@ int mac_read_from_eeprom(void);
int set_cpu_clk_info(void);
int update_flash_size(int flash_size);
int arch_early_init_r(void);
-void pci_init(void);
+int pci_init(void);
int pci_ep_init(void);
int misc_init_r(void);
#if defined(CONFIG_VID)
--
2.17.1
More information about the U-Boot
mailing list