[PATCH] remove obsolete option CONFIG_JFFS2_CMDLINE

[Stefan Roese]

On 05.11.20 10:15, Holger Brunck wrote:
> This option is obsolete since 2009 and can be removed globally.
> 
> CC: Stefan Roese <sr at denx.de>
> Signed-off-by: Holger Brunck <holger.brunck at hitachi-powergrids.com>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
>   include/configs/ethernut5.h     | 1 -
>   include/configs/km/km-powerpc.h | 2 --
>   include/configs/kmp204x.h       | 3 ---
>   include/configs/pm9263.h        | 1 -
>   include/configs/stmark2.h       | 1 -
>   scripts/config_whitelist.txt    | 1 -
>   6 files changed, 9 deletions(-)
> 
> diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
> index b513b4bc68..ca249d9d2b 100644
> --- a/include/configs/ethernut5.h
> +++ b/include/configs/ethernut5.h
> @@ -62,7 +62,6 @@
>   
>   /* JFFS2 */
>   #ifdef CONFIG_CMD_JFFS2
> -#define CONFIG_JFFS2_CMDLINE
>   #define CONFIG_JFFS2_NAND
>   #endif
>   
> diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h
> index 7bfe12fecb..3be926c103 100644
> --- a/include/configs/km/km-powerpc.h
> +++ b/include/configs/km/km-powerpc.h
> @@ -9,8 +9,6 @@
>   
>   /* Do boardspecific init for all boards */
>   
> -#define CONFIG_JFFS2_CMDLINE
> -
>   /* EEprom support 24C08, 24C16, 24C64 */
>   #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
>   #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3  /* 8 Byte write page */
> diff --git a/include/configs/kmp204x.h b/include/configs/kmp204x.h
> index ec1254e747..d1eb7b574b 100644
> --- a/include/configs/kmp204x.h
> +++ b/include/configs/kmp204x.h
> @@ -337,9 +337,6 @@ int get_scl(void);
>    * additionnal command line configuration.
>    */
>   
> -/* we don't need flash support */
> -#undef CONFIG_JFFS2_CMDLINE
> -
>   /*
>    * For booting Linux, the board info and command line data
>    * have to be in the first 64 MB of memory, since this is
> diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
> index 0ed4b1aaa2..6c882b6ff9 100644
> --- a/include/configs/pm9263.h
> +++ b/include/configs/pm9263.h
> @@ -190,7 +190,6 @@
>   
>   #endif
>   
> -#define CONFIG_JFFS2_CMDLINE		1
>   #define CONFIG_JFFS2_NAND		1
>   #define CONFIG_JFFS2_DEV		"nand0" /* NAND device jffs2 lives on */
>   #define CONFIG_JFFS2_PART_OFFSET	0	/* start of jffs2 partition */
> diff --git a/include/configs/stmark2.h b/include/configs/stmark2.h
> index d9a2f75e73..da162cbb11 100644
> --- a/include/configs/stmark2.h
> +++ b/include/configs/stmark2.h
> @@ -49,7 +49,6 @@
>   #define CONFIG_SYS_MCFRRTC_BASE		0xFC0A8000
>   
>   /* spi not partitions */
> -#define CONFIG_JFFS2_CMDLINE
>   #define CONFIG_JFFS2_DEV		"nor0"
>   
>   /* Timer */
> diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
> index a9508448d4..be3a4b3e9a 100644
> --- a/scripts/config_whitelist.txt
> +++ b/scripts/config_whitelist.txt
> @@ -848,7 +848,6 @@ CONFIG_IRAM_STACK
>   CONFIG_IRAM_TOP
>   CONFIG_IRDA_BASE
>   CONFIG_IS_ENABLED
> -CONFIG_JFFS2_CMDLINE
>   CONFIG_JFFS2_DEV
>   CONFIG_JFFS2_LZO
>   CONFIG_JFFS2_NAND
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de