[PATCH 2/2] arm64: meson: add support for libretech-cc v2

[Neil Armstrong]

Hi,

On 05/11/2020 15:15, Jerome Brunet wrote:
> Add support for the Amlogic based libretech cc version 2.
> As version 1, it is based on the s905x SoC.
> 
> Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
> ---
>  arch/arm/dts/Makefile                         |  1 +
>  ...eson-gxl-s905x-libretech-cc-v2-u-boot.dtsi |  7 ++
>  configs/libretech-cc_v2_defconfig             | 82 +++++++++++++++++++
>  3 files changed, 90 insertions(+)
>  create mode 100644 arch/arm/dts/meson-gxl-s905x-libretech-cc-v2-u-boot.dtsi
>  create mode 100644 configs/libretech-cc_v2_defconfig
> 
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index b195723f1645..e957820e8e62 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -159,6 +159,7 @@ dtb-$(CONFIG_ARCH_MESON) += \
>  	meson-gxl-s905x-p212.dtb \
>  	meson-gxl-s805x-libretech-ac.dtb \
>  	meson-gxl-s905x-libretech-cc.dtb \
> +	meson-gxl-s905x-libretech-cc-v2.dtb \
>  	meson-gxl-s905x-khadas-vim.dtb \
>  	meson-gxl-s905d-libretech-pc.dtb \
>  	meson-gxm-khadas-vim2.dtb \

This should be part of the previous patch

> diff --git a/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2-u-boot.dtsi b/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2-u-boot.dtsi
> new file mode 100644
> index 000000000000..8ff5a0ef2ba5
> --- /dev/null
> +++ b/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2-u-boot.dtsi
> @@ -0,0 +1,7 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2020 BayLibre, SAS.
> + * Author: Jerome Brunet <jbrunet at baylibre.com>
> + */
> +
> +#include "meson-gxl-u-boot.dtsi"
> diff --git a/configs/libretech-cc_v2_defconfig b/configs/libretech-cc_v2_defconfig
> new file mode 100644
> index 000000000000..e71f88edaec6
> --- /dev/null
> +++ b/configs/libretech-cc_v2_defconfig
> @@ -0,0 +1,82 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_MESON=y
> +CONFIG_SYS_TEXT_BASE=0x01000000
> +CONFIG_ENV_SIZE=0x2000
> +CONFIG_ENV_OFFSET=0xFFFF0000
> +CONFIG_ENV_SECT_SIZE=0x10000
> +CONFIG_DM_GPIO=y
> +CONFIG_MESON_GXL=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_DEBUG_UART_BASE=0xc81004c0
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_IDENT_STRING=" libretech-cc-v2"
> +CONFIG_DEBUG_UART=y
> +CONFIG_OF_BOARD_SETUP=y
> +CONFIG_USE_PREBOOT=y
> +CONFIG_PREBOOT="usb start"
> +CONFIG_MISC_INIT_R=y
> +# CONFIG_DISPLAY_CPUINFO is not set
> +# CONFIG_DISPLAY_BOARDINFO is not set
> +# CONFIG_CMD_BDI is not set
> +# CONFIG_CMD_IMI is not set
> +CONFIG_CMD_ADC=y
> +CONFIG_CMD_GPIO=y
> +# CONFIG_CMD_LOADS is not set
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SPI=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_USB_MASS_STORAGE=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_REGULATOR=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="meson-gxl-s905x-libretech-cc-v2"
> +CONFIG_ENV_IS_IN_SPI_FLASH=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_SARADC_MESON=y
> +CONFIG_DM_KEYBOARD=y
> +CONFIG_DM_MMC=y
> +CONFIG_MMC_MESON_GX=y
> +CONFIG_MTD=y
> +CONFIG_DM_MTD=y
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_SPI_FLASH_GIGADEVICE=y
> +CONFIG_PHY_ADDR_ENABLE=y
> +CONFIG_PHY_ADDR=8
> +CONFIG_PHY_MESON_GXL=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_PHY=y
> +CONFIG_MESON_GXL_USB_PHY=y
> +CONFIG_PINCTRL=y
> +CONFIG_PINCTRL_MESON_GXL=y
> +CONFIG_POWER_DOMAIN=y
> +CONFIG_MESON_GX_VPU_POWER_DOMAIN=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_DM_RESET=y
> +CONFIG_DEBUG_UART_ANNOUNCE=y
> +CONFIG_DEBUG_UART_SKIP_INIT=y
> +CONFIG_MESON_SERIAL=y
> +CONFIG_SPI=y
> +CONFIG_DM_SPI=y
> +CONFIG_MESON_SPIFC=y
> +CONFIG_USB=y
> +CONFIG_DM_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
> +CONFIG_USB_DWC3=y
> +# CONFIG_USB_DWC3_GADGET is not set
> +CONFIG_USB_KEYBOARD=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
> +CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
> +CONFIG_USB_GADGET_DWC2_OTG=y
> +CONFIG_USB_GADGET_DOWNLOAD=y
> +CONFIG_DM_VIDEO=y
> +# CONFIG_VIDEO_BPP8 is not set
> +# CONFIG_VIDEO_BPP16 is not set
> +CONFIG_SYS_WHITE_ON_BLACK=y
> +CONFIG_VIDEO_MESON=y
> +CONFIG_VIDEO_DT_SIMPLEFB=y
> +CONFIG_OF_LIBFDT_OVERLAY=y
> 

And can you also update :
doc/board/amlogic/libretech-cc.rst
doc/board/amlogic/index.rst
and
board/amlogic/p212/MAINTAINERS

Thanks,
Neil