[PATCH 13/26] clk: add support for TI K3 SoC clocks
Tero Kristo
t-kristo at ti.com
Tue Nov 10 10:05:49 CET 2020
Add driver to support TI K3 generation SoC clocks. This driver registers
the clocks provided via platform data, and adds support for controlling
the clocks via DT handles.
Signed-off-by: Tero Kristo <t-kristo at ti.com>
---
drivers/clk/Kconfig | 10 ++
drivers/clk/Makefile | 1 +
drivers/clk/clk-k3.c | 340 +++++++++++++++++++++++++++++++++++++++++++
include/k3-clk.h | 162 +++++++++++++++++++++
4 files changed, 513 insertions(+)
create mode 100644 drivers/clk/clk-k3.c
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index b2e9458f85..003a28f7ac 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -106,6 +106,16 @@ config CLK_TI_SCI
available on some new TI's SoCs. If you wish to use clock resources
managed by the TI System Controller, say Y here. Otherwise, say N.
+config CLK_K3
+ bool "Clock support for K3 SoC family of devices"
+ depends on CLK
+ help
+ Enables the clock translation layer from DT to device clocks.
+
+config SPL_CLK_K3
+ bool "Clock support for K3 SoC family of devices"
+ depends on CLK && SPL
+
config CLK_K3_PLL
bool "PLL clock support for K3 SoC family of devices"
depends on CLK && LIB_RATIONAL
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 6009eab800..2f0cb80cb9 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -49,5 +49,6 @@ obj-$(CONFIG_SANDBOX_CLK_CCF) += clk_sandbox_ccf.o
obj-$(CONFIG_STM32H7) += clk_stm32h7.o
obj-$(CONFIG_CLK_TI_SCI) += clk-ti-sci.o
obj-$(CONFIG_$(SPL_TPL_)CLK_K3_PLL) += clk-k3-pll.o
+obj-$(CONFIG_$(SPL_TPL_)CLK_K3) += clk-k3.o
obj-$(CONFIG_CLK_VERSAL) += clk_versal.o
obj-$(CONFIG_CLK_CDCE9XX) += clk-cdce9xx.o
diff --git a/drivers/clk/clk-k3.c b/drivers/clk/clk-k3.c
new file mode 100644
index 0000000000..f0392aad5d
--- /dev/null
+++ b/drivers/clk/clk-k3.c
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Texas Instruments K3 clock driver
+ *
+ * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+ * Tero Kristo <t-kristo at ti.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <soc.h>
+#include <clk-uclass.h>
+#include "k3-clk.h"
+
+#define PLL_MIN_FREQ 800000000
+#define PLL_MAX_FREQ 3200000000UL
+
+/**
+ * struct clk_map - mapping from dev/clk id tuples towards physical clocks
+ * @dev_id: device ID for the clock
+ * @clk_id: clock ID for the clock
+ * @clk: pointer to the registered clock entry for the mapping
+ */
+struct clk_map {
+ u16 dev_id;
+ u32 clk_id;
+ struct clk *clk;
+};
+
+/**
+ * struct ti_clk_data - clock controller information structure
+ * @map: mapping from dev/clk id tuples to physical clock entries
+ * @size: number of entries in the map
+ */
+struct ti_clk_data {
+ struct clk_map *map;
+ int size;
+};
+
+static ulong osc_freq;
+
+static void clk_add_map(struct ti_clk_data *data, struct clk *clk,
+ u32 dev_id, u32 clk_id)
+{
+ struct clk_map *map;
+
+ debug("%s: added clk=%p, data=%p, dev=%d, clk=%d\n", __func__,
+ clk, data, dev_id, clk_id);
+ if (!clk)
+ return;
+
+ map = data->map + data->size++;
+
+ map->dev_id = dev_id;
+ map->clk_id = clk_id;
+ map->clk = clk;
+}
+
+static const struct soc_attr ti_k3_soc_clk_data[] = {
+#ifdef CONFIG_SOC_K3_J721E
+ {
+ .family = "J721E",
+ .data = &j721e_clk_platdata,
+ },
+ {
+ .family = "J7200",
+ .data = &j7200_clk_platdata,
+ },
+#endif
+ { /* sentinel */ }
+};
+
+static int ti_clk_probe(struct udevice *dev)
+{
+ struct ti_clk_data *data = dev_get_priv(dev);
+ struct clk *clk;
+ const char *name;
+ const struct clk_data *ti_clk_data;
+ int i, j;
+ const struct soc_attr *soc_match_data;
+ const struct ti_k3_clk_platdata *pdata;
+
+ debug("%s(dev=%p)\n", __func__, dev);
+
+ soc_match_data = soc_device_match(ti_k3_soc_clk_data);
+ if (!soc_match_data)
+ return -ENODEV;
+
+ pdata = (const struct ti_k3_clk_platdata *)soc_match_data->data;
+
+ data->map = kcalloc(pdata->soc_dev_clk_data_cnt, sizeof(*data->map),
+ GFP_KERNEL);
+ data->size = 0;
+
+ for (i = 0; i < pdata->clk_list_cnt; i++) {
+ ti_clk_data = &pdata->clk_list[i];
+
+ switch (ti_clk_data->type) {
+ case CLK_TYPE_FIXED_RATE:
+ name = ti_clk_data->clk.fixed_rate.name;
+ clk = clk_register_fixed_rate(NULL,
+ name,
+ ti_clk_data->clk.fixed_rate.rate);
+ break;
+ case CLK_TYPE_DIV:
+ name = ti_clk_data->clk.div.name;
+ clk = clk_register_divider(NULL, name,
+ ti_clk_data->clk.div.parent,
+ ti_clk_data->clk.div.flags,
+ map_physmem(ti_clk_data->clk.div.reg, 0, MAP_NOCACHE),
+ ti_clk_data->clk.div.shift,
+ ti_clk_data->clk.div.width,
+ 0);
+ break;
+ case CLK_TYPE_MUX:
+ name = ti_clk_data->clk.mux.name;
+ clk = clk_register_mux(NULL, name,
+ ti_clk_data->clk.mux.parents,
+ ti_clk_data->clk.mux.num_parents,
+ ti_clk_data->clk.mux.flags,
+ map_physmem(ti_clk_data->clk.mux.reg, 0, MAP_NOCACHE),
+ ti_clk_data->clk.mux.shift,
+ ti_clk_data->clk.mux.width,
+ 0);
+ break;
+ case CLK_TYPE_PLL:
+ name = ti_clk_data->clk.pll.name;
+ clk = clk_register_ti_pll(name,
+ ti_clk_data->clk.pll.parent,
+ map_physmem(ti_clk_data->clk.pll.reg, 0, MAP_NOCACHE));
+
+ if (!osc_freq)
+ osc_freq = clk_get_rate(clk_get_parent(clk));
+ break;
+ default:
+ name = NULL;
+ clk = NULL;
+ printf("WARNING: %s has encountered unknown clk type %d\n",
+ __func__, ti_clk_data->type);
+ }
+
+ if (clk && ti_clk_data->default_freq)
+ clk_set_rate(clk, ti_clk_data->default_freq);
+
+ if (clk && name) {
+ for (j = 0; j < pdata->soc_dev_clk_data_cnt; j++) {
+ if (!strcmp(name, pdata->soc_dev_clk_data[j].clk_name)) {
+ clk_add_map(data, clk, pdata->soc_dev_clk_data[j].dev_id,
+ pdata->soc_dev_clk_data[j].clk_id);
+ }
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int _clk_cmp(u32 dev_id, u32 clk_id, const struct clk_map *map)
+{
+ if (map->dev_id == dev_id && map->clk_id == clk_id)
+ return 0;
+ if (map->dev_id > dev_id ||
+ (map->dev_id == dev_id && map->clk_id > clk_id))
+ return -1;
+ return 1;
+}
+
+static int bsearch(u32 dev_id, u32 clk_id, struct clk_map *map, int num)
+{
+ int result;
+ int idx;
+
+ for (idx = 0; idx < num; idx++) {
+ result = _clk_cmp(dev_id, clk_id, &map[idx]);
+
+ if (result == 0)
+ return idx;
+ }
+
+ return -ENOENT;
+}
+
+static int ti_clk_of_xlate(struct clk *clk,
+ struct ofnode_phandle_args *args)
+{
+ struct ti_clk_data *data = dev_get_priv(clk->dev);
+ int idx;
+
+ debug("%s(clk=%p, args_count=%d [0]=%d [1]=%d)\n", __func__, clk, args->args_count, args->args[0], args->args[1]);
+
+ if (args->args_count != 2) {
+ debug("Invalid args_count: %d\n", args->args_count);
+ return -EINVAL;
+ }
+
+ if (!data->size)
+ return -EPROBE_DEFER;
+
+ idx = bsearch(args->args[0], args->args[1], data->map, data->size);
+ if (idx < 0)
+ return idx;
+
+ clk->id = idx;
+
+ return 0;
+}
+
+static ulong ti_clk_get_rate(struct clk *clk)
+{
+ struct ti_clk_data *data = dev_get_priv(clk->dev);
+ struct clk *clkp = data->map[clk->id].clk;
+
+ return clk_get_rate(clkp);
+}
+
+static ulong ti_clk_set_rate(struct clk *clk, ulong rate)
+{
+ struct ti_clk_data *data = dev_get_priv(clk->dev);
+ struct clk *clkp = data->map[clk->id].clk;
+ int div = 1;
+ ulong child_rate;
+ const struct clk_ops *ops;
+ ulong new_rate;
+ ulong diff;
+
+ /*
+ * We must propagate rate change to parent if current clock type
+ * does not allow setting it.
+ */
+ while (clkp) {
+ ops = clkp->dev->driver->ops;
+ if (ops->set_rate)
+ break;
+
+ /*
+ * Store child rate so we can calculate the clock rate
+ * that must be passed to parent
+ */
+ child_rate = clk_get_rate(clkp);
+ clkp = clk_get_parent(clkp);
+ if (clkp)
+ div *= clk_get_rate(clkp) / child_rate;
+ }
+
+ if (!clkp)
+ return -ENOSYS;
+
+ child_rate = clk_get_rate(clkp);
+
+ new_rate = clk_set_rate(clkp, rate / div);
+
+ /*
+ * If the new rate differs by at least 10% of the target,
+ * modify parent. This handles typical cases where we have a hsdiv
+ * following directly a PLL
+ */
+
+ diff = abs(new_rate - rate / div);
+
+ debug("%s: clk=%s, div=%d, rate=%u, new_rate=%u, diff=%u\n", __func__,
+ clkp->dev->name, div, (u32)rate, (u32)new_rate, (u32)diff);
+
+ if (diff > rate / div / 10) {
+ ulong pll_tgt;
+ int pll_div;
+
+ clk = clkp;
+
+ debug("%s: propagating rate change to parent, rate=%u.\n",
+ __func__, (u32)rate / div);
+
+ clkp = clk_get_parent(clkp);
+
+ if (rate > osc_freq) {
+ pll_div = PLL_MAX_FREQ / rate / div;
+ pll_tgt = rate / div * pll_div;
+ } else {
+ pll_tgt = osc_freq;
+ pll_div = rate / div / osc_freq;
+ }
+
+ debug("%s: pll_tgt=%u, rate=%u, div=%u\n", __func__,
+ (u32)pll_tgt, (u32)rate, pll_div);
+
+ clk_set_rate(clkp, pll_tgt);
+
+ return clk_set_rate(clk, rate / div) * div;
+ }
+
+ return new_rate;
+}
+
+static int ti_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ struct ti_clk_data *data = dev_get_priv(clk->dev);
+ struct clk *clkp = data->map[clk->id].clk;
+ struct clk *parentp = data->map[parent->id].clk;
+
+ return clk_set_parent(clkp, parentp);
+}
+
+static int ti_clk_enable(struct clk *clk)
+{
+ struct ti_clk_data *data = dev_get_priv(clk->dev);
+ struct clk *clkp = data->map[clk->id].clk;
+
+ return clk_enable(clkp);
+}
+
+static int ti_clk_disable(struct clk *clk)
+{
+ struct ti_clk_data *data = dev_get_priv(clk->dev);
+ struct clk *clkp = data->map[clk->id].clk;
+
+ return clk_disable(clkp);
+}
+
+static const struct udevice_id ti_clk_of_match[] = {
+ { .compatible = "ti,k2g-sci-clk" },
+ { /* sentinel */ },
+};
+
+static const struct clk_ops ti_clk_ops = {
+ .of_xlate = ti_clk_of_xlate,
+ .set_rate = ti_clk_set_rate,
+ .get_rate = ti_clk_get_rate,
+ .enable = ti_clk_enable,
+ .disable = ti_clk_disable,
+ .set_parent = ti_clk_set_parent,
+};
+
+U_BOOT_DRIVER(ti_clk) = {
+ .name = "ti-clk",
+ .id = UCLASS_CLK,
+ .of_match = ti_clk_of_match,
+ .probe = ti_clk_probe,
+ .priv_auto_alloc_size = sizeof(struct ti_clk_data),
+ .ops = &ti_clk_ops,
+};
diff --git a/include/k3-clk.h b/include/k3-clk.h
index fc84378d03..36f0ddf7cc 100644
--- a/include/k3-clk.h
+++ b/include/k3-clk.h
@@ -7,7 +7,169 @@
#ifndef __K3_CLK_H__
#define __K3_CLK_H__
+#include <common.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
#include <linux/clk-provider.h>
+#include <linux/types.h>
+#include <stdint.h>
+
+struct dev_clk {
+ int dev_id;
+ int clk_id;
+ const char *clk_name;
+};
+
+#define DEV_CLK(_dev_id, _clk_id, _clk_name) { .dev_id = _dev_id, \
+ .clk_id = _clk_id, .clk_name = _clk_name, }
+
+#define CLK_TYPE_MUX 0x01
+#define CLK_TYPE_DIV 0x02
+#define CLK_TYPE_PLL 0x03
+#define CLK_TYPE_HFOSC 0x04
+#define CLK_TYPE_POSTDIV 0x05
+#define CLK_TYPE_MUX_PLLCTRL 0x06
+#define CLK_TYPE_FIXED_RATE 0x07
+
+struct pll_data {
+ u32 reg;
+ const char *name;
+ const char *parent;
+ u32 flags;
+};
+
+struct mux_data {
+ u32 reg;
+ const char *name;
+ const char * const *parents;
+ int num_parents;
+ u32 flags;
+ int shift;
+ int width;
+};
+
+struct div_data {
+ u32 reg;
+ const char *name;
+ const char *parent;
+ u32 flags;
+ int shift;
+ int width;
+};
+
+struct hfosc_data {
+ const char *name;
+ u32 flags;
+};
+
+struct fixed_rate_data {
+ const char *name;
+ u64 rate;
+ u32 flags;
+};
+
+struct postdiv_data {
+ const char *name;
+ const char *parent;
+ int width;
+ u32 flags;
+};
+
+struct mux_pllctrl_data {
+ u32 reg;
+ const char *name;
+ const char * const *parents;
+ int num_parents;
+ u32 flags;
+};
+
+struct clk_data {
+ int type;
+ u32 default_freq;
+ union {
+ struct pll_data pll;
+ struct mux_data mux;
+ struct div_data div;
+ struct hfosc_data hfosc;
+ struct postdiv_data postdiv;
+ struct mux_pllctrl_data mux_pllctrl;
+ struct fixed_rate_data fixed_rate;
+ } clk;
+};
+
+#define CLK_MUX(_name, _parents, _num_parents, _reg, _shift, _width, _flags) \
+ { \
+ .type = CLK_TYPE_MUX, \
+ .clk.mux = { .name = _name, .parents = _parents, \
+ .reg = _reg, \
+ .num_parents = _num_parents, .shift = _shift, \
+ .width = _width, .flags = _flags } \
+ }
+
+#define CLK_DIV(_name, _parent, _reg, _shift, _width, _flags) \
+ { \
+ .type = CLK_TYPE_DIV, \
+ .clk.div = {.name = _name, .parent = _parent, .reg = _reg, .shift = _shift, .width = _width, .flags = _flags } \
+ }
+
+#define CLK_DIV_DEFFREQ(_name, _parent, _reg, _shift, _width, _flags, _freq) \
+ { \
+ .type = CLK_TYPE_DIV, \
+ .default_freq = _freq, \
+ .clk.div = { \
+ .name = _name, .parent = _parent, \
+ .reg = _reg, .shift = _shift, \
+ .width = _width, .flags = _flags } \
+ }
+
+#define CLK_PLL(_name, _parent, _reg, _flags) \
+ { \
+ .type = CLK_TYPE_PLL, \
+ .clk.pll = {.name = _name, .parent = _parent, .reg = _reg, .flags = _flags } \
+ }
+
+#define CLK_PLL_DEFFREQ(_name, _parent, _reg, _flags, _freq) \
+ { \
+ .type = CLK_TYPE_PLL, \
+ .default_freq = _freq, \
+ .clk.pll = { .name = _name, .parent = _parent, \
+ .reg = _reg, .flags = _flags } \
+ }
+
+#define CLK_HFOSC(_name, _flags) \
+ { \
+ .type = CLK_TYPE_HFOSC, \
+ .clk.hfosc = { .name = _name, .flags = _flags } \
+ }
+
+#define CLK_FIXED_RATE(_name, _rate, _flags) \
+ { \
+ .type = CLK_TYPE_FIXED_RATE, \
+ .clk.fixed_rate = { .name = _name, .rate = _rate, .flags = _flags } \
+ }
+
+#define CLK_POSTDIV(_name, _parent, _width, _flags) \
+ { \
+ .type = CLK_TYPE_POSTDIV, \
+ .clk.postdiv = {.name = _name, .parent = _parent, .width = _width, .flags = _flags } \
+ }
+
+#define CLK_MUX_PLLCTRL(_name, _parents, _num_parents, _reg, _flags) \
+ { \
+ .type = CLK_TYPE_MUX, \
+ .clk.mux_pllctrl = { .name = _name, .parents = _parents,\
+ .num_parents = _num_parents, .flags = _flags } \
+ }
+
+struct ti_k3_clk_platdata {
+ const struct clk_data *clk_list;
+ int clk_list_cnt;
+ const struct dev_clk *soc_dev_clk_data;
+ int soc_dev_clk_data_cnt;
+};
+
+extern const struct ti_k3_clk_platdata j721e_clk_platdata;
+extern const struct ti_k3_clk_platdata j7200_clk_platdata;
struct clk *clk_register_ti_pll(const char *name, const char *parent_name,
void __iomem *reg);
--
2.17.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
More information about the U-Boot
mailing list