[PATCH] riscv: Fix efi header for RV32
Leo Liang
ycliang at andestech.com
Thu Nov 12 03:46:24 CET 2020
On Wed, Nov 11, 2020 at 04:25:53PM +0800, Leo Liang wrote:
> Hi Atish and Heinrich,
>
> On Tue, Oct 13, 2020 at 12:23:31PM -0700, Atish Patra wrote:
> > RV32 should use PE32 format instead of PE32+ as the efi header format.
> > This requires following changes
> > 1. A different header magic value
> > 2. An additional parameter known as BaseOfData. Currently, it is set to
> > zero in absence of any usage.
> >
> > Signed-off-by: Atish Patra <atish.patra at wdc.com>
> > Reviewed-by: Bin Meng <bin.meng at windriver.com>
> > Reviewed-by: Rick Chen <rick at andestech.com>
> > ---
> > arch/riscv/lib/crt0_riscv_efi.S | 7 ++++++-
> > 1 file changed, 6 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/riscv/lib/crt0_riscv_efi.S b/arch/riscv/lib/crt0_riscv_efi.S
> > index 87fe1e56f906..4aaa49ad0777 100644
> > --- a/arch/riscv/lib/crt0_riscv_efi.S
> > +++ b/arch/riscv/lib/crt0_riscv_efi.S
> > @@ -15,11 +15,13 @@
> > #define SAVE_LONG(reg, idx) sd reg, (idx*SIZE_LONG)(sp)
> > #define LOAD_LONG(reg, idx) ld reg, (idx*SIZE_LONG)(sp)
> > #define PE_MACHINE IMAGE_FILE_MACHINE_RISCV64
> > +#define PE_MAGIC IMAGE_NT_OPTIONAL_HDR64_MAGIC
> > #else
> > #define SIZE_LONG 4
> > #define SAVE_LONG(reg, idx) sw reg, (idx*SIZE_LONG)(sp)
> > #define LOAD_LONG(reg, idx) lw reg, (idx*SIZE_LONG)(sp)
> > #define PE_MACHINE IMAGE_FILE_MACHINE_RISCV32
> > +#define PE_MAGIC IMAGE_NT_OPTIONAL_HDR32_MAGIC
> > #endif
> >
> >
> > @@ -48,7 +50,7 @@ coff_header:
> > IMAGE_FILE_LOCAL_SYMS_STRIPPED | \
> > IMAGE_FILE_DEBUG_STRIPPED)
> > optional_header:
> > - .short IMAGE_NT_OPTIONAL_HDR64_MAGIC /* PE32+ format */
> > + .short PE_MAGIC /* PE32+ format */
> > .byte 0x02 /* MajorLinkerVersion */
> > .byte 0x14 /* MinorLinkerVersion */
> > .long _edata - _start /* SizeOfCode */
> > @@ -56,6 +58,9 @@ optional_header:
> > .long 0 /* SizeOfUninitializedData */
> > .long _start - ImageBase /* AddressOfEntryPoint */
> > .long _start - ImageBase /* BaseOfCode */
> > +#if __riscv_xlen == 32
> > + .long 0 /* BaseOfData */
> > +#endif
> >
> > extra_header_fields:
> > .quad 0 /* ImageBase */
>
> diff --git a/arch/riscv/lib/crt0_riscv_efi.S b/arch/riscv/lib/crt0_riscv_efi.S
> index 4aaa49ad07..f47c4a6d82 100644
> --- a/arch/riscv/lib/crt0_riscv_efi.S
> +++ b/arch/riscv/lib/crt0_riscv_efi.S
> @@ -63,7 +63,11 @@ optional_header:
> #endif
>
> extra_header_fields:
> +#if __riscv_xlen == 32
> + .long 0 /* ImageBase */
> +#else if
> .quad 0 /* ImageBase */
> +#endif
> .long 0x20 /* SectionAlignment */
> .long 0x8 /* FileAlignment */
> .short 0 /* MajorOperatingSystemVersion */
> @@ -83,10 +87,17 @@ extra_header_fields:
> .long 0 /* CheckSum */
> .short IMAGE_SUBSYSTEM_EFI_APPLICATION /* Subsystem */
> .short 0 /* DllCharacteristics */
> +#if __riscv_xlen == 32
> + .long 0 /* SizeOfStackReserve */
> + .long 0 /* SizeOfStackCommit */
> + .long 0 /* SizeOfHeapReserve */
> + .long 0 /* SizeOfHeapCommit */
> +#else if
> .quad 0 /* SizeOfStackReserve */
> .quad 0 /* SizeOfStackCommit */
> .quad 0 /* SizeOfHeapReserve */
> .quad 0 /* SizeOfHeapCommit */
> +#endif
> .long 0 /* LoaderFlags */
> .long 0x6 /* NumberOfRvaAndSizes */
>
> Based on Atish's patch,
> would the above modification fit more closely to the specification that Heinrich provided ?
>
> Best regards,
> Leo
Sending a new patch seems more reasonable.
I will send a new patch later based on this patch.
Best regards,
Leo
More information about the U-Boot
mailing list