[PATCH v4 20/23] mmc: mtk-sd: add pad control settings for MediaTek MT7620/MT76x8 SoCs
Weijie Gao
weijie.gao at mediatek.com
Thu Nov 12 09:37:02 CET 2020
The driver is missing pad control settings (pad delay and pad conf) for
the mt7620 and mt76x8. Although mt76x8 still works well, mt7620 will
encounter CRC error on data transfers.
This patch adds default pad control settings for mt7620_compat.
Reviewed-by: Stefan Roese <sr at denx.de>
Signed-off-by: Weijie Gao <weijie.gao at mediatek.com>
---
v4 changes: none
v3 changes: none
v2 changes: none
---
drivers/mmc/mtk-sd.c | 121 +++++++++++++++++++++++++++++++++++++++++--
1 file changed, 118 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/mtk-sd.c b/drivers/mmc/mtk-sd.c
index 63ff68272c..f4ff8822f2 100644
--- a/drivers/mmc/mtk-sd.c
+++ b/drivers/mmc/mtk-sd.c
@@ -113,7 +113,51 @@
#define MSDC_PB2_RESPWAIT_M 0x0c
#define MSDC_PB2_RESPWAIT_S 2
+/* MSDC_PAD_CTRL0 */
+#define MSDC_PAD_CTRL0_CLKRDSEL_M 0xff000000
+#define MSDC_PAD_CTRL0_CLKRDSEL_S 24
+#define MSDC_PAD_CTRL0_CLKTDSEL BIT(20)
+#define MSDC_PAD_CTRL0_CLKIES BIT(19)
+#define MSDC_PAD_CTRL0_CLKSMT BIT(18)
+#define MSDC_PAD_CTRL0_CLKPU BIT(17)
+#define MSDC_PAD_CTRL0_CLKPD BIT(16)
+#define MSDC_PAD_CTRL0_CLKSR BIT(8)
+#define MSDC_PAD_CTRL0_CLKDRVP_M 0x70
+#define MSDC_PAD_CTRL0_CLKDRVP_S 4
+#define MSDC_PAD_CTRL0_CLKDRVN_M 0x7
+#define MSDC_PAD_CTRL0_CLKDRVN_S 0
+
+/* MSDC_PAD_CTRL1 */
+#define MSDC_PAD_CTRL1_CMDRDSEL_M 0xff000000
+#define MSDC_PAD_CTRL1_CMDRDSEL_S 24
+#define MSDC_PAD_CTRL1_CMDTDSEL BIT(20)
+#define MSDC_PAD_CTRL1_CMDIES BIT(19)
+#define MSDC_PAD_CTRL1_CMDSMT BIT(18)
+#define MSDC_PAD_CTRL1_CMDPU BIT(17)
+#define MSDC_PAD_CTRL1_CMDPD BIT(16)
+#define MSDC_PAD_CTRL1_CMDSR BIT(8)
+#define MSDC_PAD_CTRL1_CMDDRVP_M 0x70
+#define MSDC_PAD_CTRL1_CMDDRVP_S 4
+#define MSDC_PAD_CTRL1_CMDDRVN_M 0x7
+#define MSDC_PAD_CTRL1_CMDDRVN_S 0
+
+/* MSDC_PAD_CTRL2 */
+#define MSDC_PAD_CTRL2_DATRDSEL_M 0xff000000
+#define MSDC_PAD_CTRL2_DATRDSEL_S 24
+#define MSDC_PAD_CTRL2_DATTDSEL BIT(20)
+#define MSDC_PAD_CTRL2_DATIES BIT(19)
+#define MSDC_PAD_CTRL2_DATSMT BIT(18)
+#define MSDC_PAD_CTRL2_DATPU BIT(17)
+#define MSDC_PAD_CTRL2_DATPD BIT(16)
+#define MSDC_PAD_CTRL2_DATSR BIT(8)
+#define MSDC_PAD_CTRL2_DATDRVP_M 0x70
+#define MSDC_PAD_CTRL2_DATDRVP_S 4
+#define MSDC_PAD_CTRL2_DATDRVN_M 0x7
+#define MSDC_PAD_CTRL2_DATDRVN_S 0
+
/* PAD_TUNE */
+#define MSDC_PAD_TUNE_CLKTDLY_M 0xf8000000
+#define MSDC_PAD_TUNE_CLKTDLY_S 27
#define MSDC_PAD_TUNE_CMDRRDLY_M 0x7c00000
#define MSDC_PAD_TUNE_CMDRRDLY_S 22
#define MSDC_PAD_TUNE_CMD_SEL BIT(21)
@@ -129,6 +173,26 @@
#define PAD_CMD_TUNE_RX_DLY3 0x3E
#define PAD_CMD_TUNE_RX_DLY3_S 1
+/* PAD_TUNE0 */
+#define MSDC_PAD_TUNE0_DAT0RDDLY_M 0x1f000000
+#define MSDC_PAD_TUNE0_DAT0RDDLY_S 24
+#define MSDC_PAD_TUNE0_DAT1RDDLY_M 0x1f0000
+#define MSDC_PAD_TUNE0_DAT1RDDLY_S 16
+#define MSDC_PAD_TUNE0_DAT2RDDLY_M 0x1f00
+#define MSDC_PAD_TUNE0_DAT2RDDLY_S 8
+#define MSDC_PAD_TUNE0_DAT3RDDLY_M 0x1f
+#define MSDC_PAD_TUNE0_DAT3RDDLY_S 0
+
+/* PAD_TUNE1 */
+#define MSDC_PAD_TUNE1_DAT4RDDLY_M 0x1f000000
+#define MSDC_PAD_TUNE1_DAT4RDDLY_S 24
+#define MSDC_PAD_TUNE1_DAT5RDDLY_M 0x1f0000
+#define MSDC_PAD_TUNE1_DAT5RDDLY_S 16
+#define MSDC_PAD_TUNE1_DAT6RDDLY_M 0x1f00
+#define MSDC_PAD_TUNE1_DAT6RDDLY_S 8
+#define MSDC_PAD_TUNE1_DAT7RDDLY_M 0x1f
+#define MSDC_PAD_TUNE1_DAT7RDDLY_S 0
+
/* EMMC50_CFG0 */
#define EMMC50_CFG_CFCSTS_SEL BIT(4)
@@ -223,7 +287,10 @@ struct mtk_sd_regs {
u32 dat3_tune_crc;
u32 cmd_tune_crc;
u32 sdio_tune_wind;
- u32 reserved4[5];
+ u32 reserved4[2];
+ u32 pad_ctrl0;
+ u32 pad_ctrl1;
+ u32 pad_ctrl2;
u32 pad_tune;
u32 pad_tune0;
u32 pad_tune1;
@@ -264,6 +331,8 @@ struct msdc_compatible {
bool busy_check;
bool stop_clk_fix;
bool enhance_rx;
+ bool builtin_pad_ctrl;
+ bool default_pad_dly;
};
struct msdc_delay_phase {
@@ -1391,9 +1460,14 @@ static void msdc_init_hw(struct msdc_host *host)
{
u32 val;
void __iomem *tune_reg = &host->base->pad_tune;
+ void __iomem *rd_dly0_reg = &host->base->pad_tune0;
+ void __iomem *rd_dly1_reg = &host->base->pad_tune1;
- if (host->dev_comp->pad_tune0)
+ if (host->dev_comp->pad_tune0) {
tune_reg = &host->base->pad_tune0;
+ rd_dly0_reg = &host->base->dat_rd_dly[0];
+ rd_dly1_reg = &host->base->dat_rd_dly[1];
+ }
/* Configure to MMC/SD mode, clock free running */
setbits_le32(&host->base->msdc_cfg, MSDC_CFG_MODE);
@@ -1479,6 +1553,45 @@ static void msdc_init_hw(struct msdc_host *host)
setbits_le32(tune_reg, MSDC_PAD_TUNE_RXDLYSEL);
}
+ if (host->dev_comp->builtin_pad_ctrl) {
+ /* Set pins driving strength */
+ writel(MSDC_PAD_CTRL0_CLKPD | MSDC_PAD_CTRL0_CLKSMT |
+ MSDC_PAD_CTRL0_CLKIES | (4 << MSDC_PAD_CTRL0_CLKDRVN_S) |
+ (4 << MSDC_PAD_CTRL0_CLKDRVP_S), &host->base->pad_ctrl0);
+ writel(MSDC_PAD_CTRL1_CMDPU | MSDC_PAD_CTRL1_CMDSMT |
+ MSDC_PAD_CTRL1_CMDIES | (4 << MSDC_PAD_CTRL1_CMDDRVN_S) |
+ (4 << MSDC_PAD_CTRL1_CMDDRVP_S), &host->base->pad_ctrl1);
+ writel(MSDC_PAD_CTRL2_DATPU | MSDC_PAD_CTRL2_DATSMT |
+ MSDC_PAD_CTRL2_DATIES | (4 << MSDC_PAD_CTRL2_DATDRVN_S) |
+ (4 << MSDC_PAD_CTRL2_DATDRVP_S), &host->base->pad_ctrl2);
+ }
+
+ if (host->dev_comp->default_pad_dly) {
+ /* Default pad delay may be needed if tuning not enabled */
+ clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CLKTDLY_M |
+ MSDC_PAD_TUNE_CMDRRDLY_M |
+ MSDC_PAD_TUNE_CMDRDLY_M |
+ MSDC_PAD_TUNE_DATRRDLY_M |
+ MSDC_PAD_TUNE_DATWRDLY_M,
+ (0x10 << MSDC_PAD_TUNE_CLKTDLY_S) |
+ (0x10 << MSDC_PAD_TUNE_CMDRRDLY_S) |
+ (0x10 << MSDC_PAD_TUNE_CMDRDLY_S) |
+ (0x10 << MSDC_PAD_TUNE_DATRRDLY_S) |
+ (0x10 << MSDC_PAD_TUNE_DATWRDLY_S));
+
+ writel((0x10 << MSDC_PAD_TUNE0_DAT0RDDLY_S) |
+ (0x10 << MSDC_PAD_TUNE0_DAT1RDDLY_S) |
+ (0x10 << MSDC_PAD_TUNE0_DAT2RDDLY_S) |
+ (0x10 << MSDC_PAD_TUNE0_DAT3RDDLY_S),
+ rd_dly0_reg);
+
+ writel((0x10 << MSDC_PAD_TUNE1_DAT4RDDLY_S) |
+ (0x10 << MSDC_PAD_TUNE1_DAT5RDDLY_S) |
+ (0x10 << MSDC_PAD_TUNE1_DAT6RDDLY_S) |
+ (0x10 << MSDC_PAD_TUNE1_DAT7RDDLY_S),
+ rd_dly1_reg);
+ }
+
/* Configure to enable SDIO mode otherwise sdio cmd5 won't work */
setbits_le32(&host->base->sdc_cfg, SDC_CFG_SDIO);
@@ -1620,7 +1733,9 @@ static const struct msdc_compatible mt7620_compat = {
.data_tune = false,
.busy_check = false,
.stop_clk_fix = false,
- .enhance_rx = false
+ .enhance_rx = false,
+ .builtin_pad_ctrl = true,
+ .default_pad_dly = true,
};
static const struct msdc_compatible mt7622_compat = {
--
2.17.1
More information about the U-Boot
mailing list