[v3 15/16] arm: socfpga: soc64: Enable FIT image generation using binman

[Tan, Ley Foon]

> -----Original Message-----
> From: Lim, Elly Siew Chin <elly.siew.chin.lim at intel.com>
> Sent: Thursday, October 15, 2020 8:30 PM
> To: u-boot at lists.denx.de
> Cc: Marek Vasut <marex at denx.de>; Tan, Ley Foon
> <ley.foon.tan at intel.com>; See, Chin Liang <chin.liang.see at intel.com>;
> Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>; Chee, Tien Fong
> <tien.fong.chee at intel.com>; Westergreen, Dalon
> <dalon.westergreen at intel.com>; Simon Glass <sjg at chromium.org>; Lim,
> Elly Siew Chin <elly.siew.chin.lim at intel.com>
> Subject: [v3 15/16] arm: socfpga: soc64: Enable FIT image generation using
> binman
> 
> Add new build target "fit-itb" for FIT image generation.
> 
> In preparation to support Vendor Authorized Boot (VAB) for Intel
> SOC64 device in near future. With VAB, u-boot proper, dtb and arm trusted
> firmware need to be signed before FIT image generation.
> 
> To align user experience for ATF boot with and without VAB feature, we skip
> binman for ARCH_SOCFPGA in default Makefile flow. User always use 'make
> fit-itb' to generate FIT image after successfully compile u-boot.
> 
> Signed-off-by: Siew Chin Lim <elly.siew.chin.lim at intel.com>
> ---
>  Makefile                      | 7 +++++++
>  arch/arm/mach-socfpga/Kconfig | 2 ++
>  2 files changed, 9 insertions(+)
> 
> diff --git a/Makefile b/Makefile
> index 28c9f31fb4..ed05becc9e 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -1020,8 +1020,10 @@ inputs: $(INPUTS-y)
> 
>  all: .binman_stamp inputs
>  ifeq ($(CONFIG_BINMAN),y)
> +ifneq ($(CONFIG_ARCH_SOCFPGA),y)
>  	$(call if_changed,binman)
>  endif
> +endif
> 
>  # Timestamp file to make sure that binman always runs
>  .binman_stamp: FORCE
> @@ -1600,6 +1602,11 @@ cmd_socnandboot = cat	u-boot-spl-padx4.sfp
> u-boot.img > $@ || rm -f $@
>  u-boot-with-nand-spl.sfp: u-boot-spl-padx4.sfp u-boot.img FORCE
>  	$(call if_changed,socnandboot)
> 
> +ifeq ($(CONFIG_FIT),y)
> +fit-itb:
> +	$(call if_changed,binman)
> +endif
> +
>  endif
> 
>  ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
> diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-
> socfpga/Kconfig index 01f5a1fc41..7fdb52dd83 100644
> --- a/arch/arm/mach-socfpga/Kconfig
> +++ b/arch/arm/mach-socfpga/Kconfig
> @@ -37,6 +37,7 @@ config TARGET_SOCFPGA_AGILEX
>  	select FPGA_INTEL_SDM_MAILBOX
>  	select NCORE_CACHE
>  	select SPL_CLK if SPL
> +	select BINMAN
Sort by alphabetical order

>  config TARGET_SOCFPGA_ARRIA5
>  	bool
> @@ -79,6 +80,7 @@ config TARGET_SOCFPGA_STRATIX10
>  	select ARMV8_MULTIENTRY
>  	select ARMV8_SET_SMPEN
>  	select FPGA_INTEL_SDM_MAILBOX
> +	select BINMAN

Sort by alphabetical order


Regards
Ley Foon