[PATCH v3 3/7] net: macb: Add phy address to read it from device tree
Anup Patel
anup at brainfault.org
Sun Nov 15 13:12:31 CET 2020
On Tue, Nov 10, 2020 at 4:16 PM Padmarao Begari
<padmarao.begari at microchip.com> wrote:
>
> Read phy address from device tree and use it to find the phy device
> if not found then search in the range of 0 to 31.
>
> Signed-off-by: Padmarao Begari <padmarao.begari at microchip.com>
> ---
> drivers/net/macb.c | 17 +++++++++++++++--
> 1 file changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/macb.c b/drivers/net/macb.c
> index 9ccbb7a166..81b1f1ba26 100644
> --- a/drivers/net/macb.c
> +++ b/drivers/net/macb.c
> @@ -531,6 +531,12 @@ static int macb_phy_find(struct macb_device *macb, const char *name)
> int i;
> u16 phy_id;
>
> + phy_id = macb_mdio_read(macb, macb->phy_addr, MII_PHYSID1);
> + if (phy_id != 0xffff) {
> + printf("%s: PHY present at %d\n", name, macb->phy_addr);
> + return 0;
> + }
> +
> /* Search for PHY... */
> for (i = 0; i < 32; i++) {
> macb->phy_addr = i;
> @@ -1315,11 +1321,12 @@ static int macb_eth_probe(struct udevice *dev)
> {
> struct eth_pdata *pdata = dev_get_platdata(dev);
> struct macb_device *macb = dev_get_priv(dev);
> + struct ofnode_phandle_args phandle_args;
> const char *phy_mode;
> int ret;
>
> - phy_mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "phy-mode",
> - NULL);
> + phy_mode = dev_read_prop(dev, "phy-mode", NULL);
> +
> if (phy_mode)
> macb->phy_interface = phy_get_interface_by_name(phy_mode);
> if (macb->phy_interface == -1) {
> @@ -1327,6 +1334,12 @@ static int macb_eth_probe(struct udevice *dev)
> return -EINVAL;
> }
>
> + /* Read phyaddr from DT */
> + if (!dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0,
> + &phandle_args))
> + macb->phy_addr = ofnode_read_u32_default(phandle_args.node,
> + "reg", -1);
> +
> macb->regs = (void *)pdata->iobase;
>
> macb->is_big_endian = (cpu_to_be32(0x12345678) == 0x12345678);
> --
> 2.17.1
>
Looks good to me.
Reviewed-by: Anup Patel <anup.patel at wdc.com>
This patch also needs to be tested on SiFive Unleashed because it has
same ethernet controller.
Regards,
Anup
More information about the U-Boot
mailing list