[PATCH v3] sunxi: add PineCube board

[André Przywara]

On 18/11/2020 10:27, Icenowy Zheng wrote:

> PineCube is an IP camera development kit released by Pine64.
> 
> It comes with the following compoents:
> 
> - A mainboard with Sochip S3 SoC, a 16MByte SPI Flash, AXP209 PMIC,
> a power-only microUSB connector, a USB Type-A connector, a 10/100Mbps
> Ethernet port and FPC connectors for camera and daughter board.
> - An OV5640-based camera module which is connected to the parallel CSI
> bus of the mainboard.
> - A daughterboard with several buttons, a SD slot, some IR LEDs, a
> microphone and a speaker connector.
> 
> As the device tree is synchronized in a previous commit, just add it to
> Makefile, create a new MAINTAINER item and provide a defconfig.

Thanks for the quick fix. I could now compile an image.

> Signed-off-by: Icenowy Zheng <icenowy at aosc.io>

Reviewed-by: Andre Przywara <andre.przywara at arm.com>

Cheers,
Andre

> ---
> Changes since v2:
> - Add Makefile reference to DT.
> Changes since v1:
> - Dropped LDO3 quirk.
> 
>  arch/arm/dts/Makefile      |  1 +
>  board/sunxi/MAINTAINERS    |  5 +++++
>  configs/pinecube_defconfig | 15 +++++++++++++++
>  3 files changed, 21 insertions(+)
>  create mode 100644 configs/pinecube_defconfig
> 
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 7d1a369845..e6993733b0 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -587,6 +587,7 @@ dtb-$(CONFIG_MACH_SUN8I_R40) += \
>  	sun8i-r40-bananapi-m2-ultra.dtb \
>  	sun8i-v40-bananapi-m2-berry.dtb
>  dtb-$(CONFIG_MACH_SUN8I_V3S) += \
> +	sun8i-s3-pinecube.dtb \
>  	sun8i-v3s-licheepi-zero.dtb
>  dtb-$(CONFIG_MACH_SUN50I_H5) += \
>  	sun50i-h5-bananapi-m2-plus.dtb \
> diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
> index d3755ae41a..735801ae1d 100644
> --- a/board/sunxi/MAINTAINERS
> +++ b/board/sunxi/MAINTAINERS
> @@ -440,6 +440,11 @@ M:	Vasily Khoruzhick <anarsoul at gmail.com>
>  S:	Maintained
>  F:	configs/pinebook_defconfig
>  
> +PINECUBE BOARD:
> +M:	Icenowy Zheng <icenowy at aosc.io>
> +S:	Maintained
> +F:	configs/pinecube_defconfig
> +
>  PINE64 BOARDS
>  M:	Andre Przywara <andre.przywara at arm.com>
>  S:	Maintained
> diff --git a/configs/pinecube_defconfig b/configs/pinecube_defconfig
> new file mode 100644
> index 0000000000..a8c404f6b1
> --- /dev/null
> +++ b/configs/pinecube_defconfig
> @@ -0,0 +1,15 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SUNXI=y
> +CONFIG_SPL=y
> +CONFIG_MACH_SUN8I_V3S=y
> +CONFIG_SUNXI_DRAM_DDR3_1333=y
> +CONFIG_DRAM_CLK=504
> +CONFIG_DRAM_ODT_EN=y
> +CONFIG_I2C0_ENABLE=y
> +CONFIG_DEFAULT_DEVICE_TREE="sun8i-s3-pinecube"
> +CONFIG_SPL_I2C_SUPPORT=y
> +# CONFIG_NETDEVICES is not set
> +CONFIG_AXP209_POWER=y
> +CONFIG_AXP_DCDC2_VOLT=1250
> +CONFIG_AXP_DCDC3_VOLT=3300
> +CONFIG_CONS_INDEX=3
>