[PATCH v1 2/7] board: toradex: add apalis-imx8x 2gb wb it v1.1a module support

Oliver Graute oliver.graute at gmail.com
Thu Nov 19 15:27:31 CET 2020


On 22/10/20, Igor Opaniuk wrote:
> From: Igor Opaniuk <igor.opaniuk at toradex.com>
> 
> * With the SCU FW from the latest Toradex BSP 5.0.0 (SCU FW 1.5.1)
> ETH PHY encounters bring up problems after reset, this will be fixed
> soon on SCU FW side.

Hello Igor,

are these ETH Phy problems also in NXP provided SCU FW 1.5.1/ 1.6.0?

Because I observe some phy clk issue after upgrading from SCU FW 1.2.6
to 1.5.1/1.6.0. (iMX8QM)

Best regards,

Oliver


More information about the U-Boot mailing list