[BUG] U-boot does not detect emmc card in odroid-c2 for newer U-boot as 2020.04
Otto Meier
gf435 at gmx.net
Thu Nov 19 16:52:16 CET 2020
Hi,
I have extended the previous post.
with these modifications i get:
U-Boot 2021.01-rc2-00047-g9324c9a823-dirty (Nov 19 2020 - 15:33:00
+0100) odroid-c2
Model: Hardkernel ODROID-C2
SoC: Amlogic Meson GXBB (S905) Revision 1f:c (0:1)
DRAM: 2 GiB
MMC: mmc at 72000: 0, mmc at 74000: 1
In: serial
Out: serial
Err: serial
Net: Could not get PHY for ethernet at c9410000: addr -1
No ethernet found.
Hit any key to stop autoboot: 0
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = cdff0000
MESON EMMC status = 01ff2800
meson_dm_mmc_send_cmd[226]
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2800
meson_dm_mmc_send_cmd[226]
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = cdff0000
MESON EMMC status = 01ff2800
meson_dm_mmc_send_cmd[226]
Card did not respond to voltage select! : -110
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = cdff0000
MESON EMMC status = 01ff2800
meson_dm_mmc_send_cmd[226]
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2800
meson_dm_mmc_send_cmd[226]
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 00ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2800
meson_dm_mmc_send_cmd[226]
Card did not respond to voltage select! : -110
MMC Device 2 not found
no mmc device at slot 2
starting USB...
Hope this shed more light on the issue.
Following you find the output of 2020.04 with this mod.
and working reading off mmc info of the emmc
=> mmc dev 1
MESON EMMC status = c5ff0000
MESON EMMC status = c5ff0000
MESON EMMC status = c8ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = cdff0000
MESON EMMC status = 01ff2800
meson_dm_mmc_send_cmd[206]
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2800
meson_dm_mmc_send_cmd[206]
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = d9fe0000
MESON EMMC status = d9fe0000
MESON EMMC status = d9fe0000
MESON EMMC status = d9fe0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
MESON EMMC status = c5ff0000
MESON EMMC status = 01ff2000
switch to partitions #0, OK
mmc1(part 0) is current device
=> mmc info
Device: mmc at 74000
Manufacturer ID: 15
OEM: 100
Name: CJTD4
Bus Speed: 52000000
Mode: MMC High Speed (52MHz)
Rd Block Len: 512
MMC version 5.1
High Capacity: Yes
Capacity: 58.2 GiB
Bus Width: 8-bit
Erase Group Size: 512 KiB
HC WP Group Size: 8 MiB
User Capacity: 58.2 GiB WRREL
Boot Capacity: 4 MiB ENH
RPMB Capacity: 4 MiB ENH
Best regards
Am 19.11.20 um 12:50 schrieb Jaehoon Chung:
> Hi,
>
> On 11/19/20 12:54 AM, Otto Meier wrote:
>> Hi,
>>
>> i have reverted the commit fe95905ffed57d617cad81a71ac419d53aaa1ebf
>> and set regulator-allways-on in meson-gxbb-odroidc2.dts.
>>
>> And i also applied "PATCH V2] mmc: display an error number to debug"
>> from list and disabled CONFIG_MMC_DEBUG
>>
>> after that i got the following result:
>>
>>
>> U-Boot 2021.01-rc2-00047-g9324c9a823-dirty (Nov 18 2020 - 16:38:40
>> +0100) odroid-c2
>>
>> Model: Hardkernel ODROID-C2
>> SoC: Amlogic Meson GXBB (S905) Revision 1f:c (0:1)
>> DRAM: 2 GiB
>> MMC: mmc at 72000: 0, mmc at 74000: 1
>> In: serial
>> Out: serial
>> Err: serial
>> Net: eth0: ethernet at c9410000
>> Hit any key to stop autoboot: 0
>> Card did not respond to voltage select! : -110
>> Card did not respond to voltage select! : -110
>> MMC Device 2 not found
>> no mmc device at slot 2
>> starting USB...
>> Bus usb at c9100000: USB DWC2
>> scanning bus usb at c9100000 for devices... 2 USB Device(s) found
>> scanning usb for storage devices... 0 Storage Device(s) found
>>
>> Device 0: unknown device
>> Speed: 1000, full duplex
>> BOOTP broadcast 1
>> BOOTP broadcast 2
>> BOOTP broadcast 3
>> BOOTP broadcast 4
>> BOOTP broadcast 5
>> DHCP client bound to address 192.168.20.199 (3767 ms)
>> *** Warning: no boot file name; using 'C0A814C7.img'
>> Using ethernet at c9410000 device
>>
>> It Does not seem to have fixed it. The above mentioned patch
>> prints ERROR 110. I'm not able to bisect.
>> Perhaps if any other reason comes to mind. I will try and test it.
> I think your targets's status is something special. I'm not sure but
> it seems that something is affected.
> Frankly, it's difficult to me about finding correct problem without
> Odroid-c2.
>
> But TIMEOUT is returned two locations.
>
> When i saw your previous log, i guess that it's below location.
>
> /* use 10s timeout */
> start = get_timer(0);
> do {
> status = meson_read(mmc, MESON_SD_EMMC_STATUS);
> } while(!(status & STATUS_END_OF_CHAIN) && get_timer(start) < 10000);
>
> if (!(status & STATUS_END_OF_CHAIN))
> ret = -ETIMEDOUT;
> else if (status & STATUS_RESP_TIMEOUT)
> ret = -ETIMEDOUT;
> else if (status & STATUS_ERR_MASK)
> ret = -EIO;
> To Workaround check, increase timeout value from 1000 to other value.
> And check which condition is hit, plz. likes below.
>
> do {
> status = meson_read(mmc, MESON_SD_EMMC_STATUS);
> printf("MESON EMMC status = %08x\n", status);
> } while(!(status & STATUS_END_OF_CHAIN) && get_timer(start) < 1000000);
>
> if (!(status & STATUS_END_OF_CHAIN)) {
> printf("%s[%d]\n",__func__,__LINE__);
> ret = -ETIMEDOUT;
> } else if (status & STATUS_RESP_TIMEOUT) {
> printf("%s[%d]\n",__func__,__LINE__);
> ret = -ETIMEDOUT;
> } else if (status & STATUS_ERR_MASK)
> ret = -EIO;
>
> Sorry for not being able to help you much.
>
>
> Best Regards,
> Jaehoon Chung
>
>
>> Best regards
>> otto
>>
>>
>>
>>
>> Am 18.11.20 um 13:23 schrieb Jaehoon Chung:
>>> On 11/18/20 8:44 PM, Otto Meier wrote:
>>>> Hi,
>>>>
>>>> it is not a new issue, since u-boot 2020.07 this issue exists.
>>>> even by using the repo you mention the error exist.
>>> Yes, git repo doesn't matter. When i have checked, you are using
>>> almost latest u-boot. (commit 9324c9a823)
>>>
>>> If it's existed since 2020.07, it seems that relevant to below commit.
>>>
>>> commit fe95905ffed57d617cad81a71ac419d53aaa1ebf
>>> Author: Haibo Chen <haibo.chen at nxp.com>
>>> Date: Mon Jun 15 17:18:12 2020 +0800
>>>
>>> mmc: retry CMD1 in mmc_send_op_cond() until the eMMC is ready
>>>
>>> According to eMMC specification v5.1 section 6.4.3, we should issue
>>> CMD1 repeatedly in the idle state until the eMMC is ready even if
>>> mmc_send_op_cond() send CMD1 with argument = 0. Otherwise some eMMC
>>> devices seems to enter the inactive mode after
>>> mmc_complete_op_cond()
>>> issued CMD0 when the eMMC device is busy.
>>>
>>> Signed-off-by: Haibo Chen <haibo.chen at nxp.com>
>>> Reviewed-by: Peng Fan <peng.fan at nxp.com>
>>>
>>> Could you check it?
>>>
>>> Best Regards,
>>> Jaehoon Chung
>>>
>>>
>>>> I allways use : make odroid-c2_defconfig with no other config
>>>> option set to build u-boot.
>>>>
>>>> Best regards
>>>>
>>>> Otto
>>>>
>>>> Am 18.11.20 um 09:12 schrieb Alexander Dahl:
>>>>> Hei hei,
>>>>>
>>>>> FWIW see below,
>>>>>
>>>>> Am Dienstag, 17. November 2020, 20:08:21 CET schrieb Otto Meier:
>>>>>> Dear Jaehoon Chung,
>>>>>>
>>>>>> I cloned github.com/u-boot which i believe is the master repo.
>>>>> That seems to be an up to date mirror. However, according to [1]
>>>>> and [2] the
>>>>> real upstream repository is here:
>>>>>
>>>>> https://protect2.fireeye.com/v1/url?k=6b6d3e43-34f6074f-6b6cb50c-000babff3563-39827ce0c87bb58b&q=1&e=29cccebd-0f84-49bd-a69e-c1c8a1916260&u=https%3A%2F%2Fgitlab.denx.de%2Fu-boot%2Fu-boot
>>>>>
>>>>> Greets
>>>>> Alex
>>>>>
>>>>> [1]
>>>>> https://protect2.fireeye.com/v1/url?k=582063cf-07bb5ac3-5821e880-000babff3563-5e4585439f04bb00&q=1&e=29cccebd-0f84-49bd-a69e-c1c8a1916260&u=https%3A%2F%2Fwww.denx.de%2Fwiki%2FU-Boot%2FSourceCode
>>>>> [2]
>>>>> https://protect2.fireeye.com/v1/url?k=d5f680f6-8a6db9fa-d5f70bb9-000babff3563-dc85cc723e07fae0&q=1&e=29cccebd-0f84-49bd-a69e-c1c8a1916260&u=https%3A%2F%2Fu-boot.readthedocs.io%2Fen%2Flatest%2Fbuild%2Fsource.html
>>>>>
>>>>>> I enabled CONFIG_MMC_TRACE and got following
>>>>>> response:
>>>>>>
>>>>>> GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:0;READ:0;CHK:0;
>>>>>> TE: 308588
>>>>>> no sdio debug board detected
>>>>>>
>>>>>> BL2 Built : 11:44:26, Nov 25 2015.
>>>>>> gxb gfb13a3b-c2 - jcao at wonton
>>>>>>
>>>>>> Board ID = 8
>>>>>> set vcck to 1100 mv
>>>>>> set vddee to 1050 mv
>>>>>> CPU clk: 1536MHz
>>>>>> DDR channel setting: DDR0 Rank0+1 same
>>>>>> DDR0: 2048MB(auto) @ 912MHz(2T)-13
>>>>>> DataBus test pass!
>>>>>> AddrBus test pass!
>>>>>> Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size:
>>>>>> 0x000000b0
>>>>>> Load bl30 from eMMC, src: 0x00010200, des: 0x01000000, size:
>>>>>> 0x00009ef0
>>>>>> Sending bl30........................................OK.
>>>>>> Run bl30...
>>>>>> Load bl301 from eMMC, src: 0x0001c200, des: 0x01000000, size:
>>>>>> 0x000018c0
>>>>>> Wait bl30...Done
>>>>>> Sending bl301.......OK.
>>>>>> Run bl301...
>>>>>> from eMMC, src: 0x00020200, des: 0x10100000, size: 0x00011130
>>>>>>
>>>>>>
>>>>>> --- UART initialized after reboot ---
>>>>>> [Reset cause: unknown]
>>>>>> [Image: unknown, amlogic_v1.1.3046-00db630-dirty 2016-08-31 09:24:14
>>>>>> tao.zeng at droid04]
>>>>>> bl30: check_permit, count is 1
>>>>>> bl30: check_permit: ok!
>>>>>> chipidLoad bl33 from eMMC, src: 0x00034200, des: 0x01000000, size:
>>>>>> 0x0009e330
>>>>>>
>>>>>> : ef be ad de d f0 ad ba ef be ad de not ES chip
>>>>>>
>>>>>> [0.423714 Inits done]
>>>>>> secure task start!
>>>>>> high task start!
>>>>>> low task start!
>>>>>> NOTICE: BL3-1: v1.0(debug):4d2e34d
>>>>>> NOTICE: BL3-1: Built : 17:08:35, Oct 29 2015
>>>>>> INFO: BL3-1: Initializing runtime services
>>>>>> INFO: BL3-1: Preparing for EL3 exit to normal world
>>>>>> INFO: BL3-1: Next image address = 0x1000000
>>>>>> INFO: BL3-1: Next image spsr = 0x3c9
>>>>>>
>>>>>>
>>>>>> U-Boot 2021.01-rc2-00047-g9324c9a823 (Nov 17 2020 - 19:34:41 +0100)
>>>>>> odroid-c2
>>>>>>
>>>>>> Model: Hardkernel ODROID-C2
>>>>>> SoC: Amlogic Meson GXBB (S905) Revision 1f:c (0:1)
>>>>>> DRAM: 2 GiB
>>>>>> MMC: mmc at 72000: 0, mmc at 74000: 1
>>>>>> In: serial
>>>>>> Out: serial
>>>>>> Err: serial
>>>>>> Net: Could not get PHY for ethernet at c9410000: addr -1
>>>>>> No ethernet found.
>>>>>>
>>>>>> Hit any key to stop autoboot: 0
>>>>>> CMD_SEND:0
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_NONE
>>>>>> CMD_SEND:8
>>>>>> ARG 0x000001aa
>>>>>> RET -110
>>>>>> CMD_SEND:55
>>>>>> ARG 0x00000000
>>>>>> RET -110
>>>>>> CMD_SEND:0
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_NONE
>>>>>> CMD_SEND:1
>>>>>> ARG 0x00000000
>>>>>> RET -110
>>>>>> Card did not respond to voltage select!
>>>>>> CMD_SEND:0
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_NONE
>>>>>> CMD_SEND:8
>>>>>> ARG 0x000001aa
>>>>>> RET -110
>>>>>> CMD_SEND:55
>>>>>>
>>>>>> ARG 0x00000000
>>>>>>
>>>>>> RET -110
>>>>>> CMD_SEND:0
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_NONE
>>>>>> CMD_SEND:1
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R3,4 0x00000000
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40000000
>>>>>> RET -110
>>>>>> Card did not respond to voltage select!
>>>>>> MMC Device 2 not found
>>>>>> no mmc device at slot 2
>>>>>> starting USB...
>>>>>> Bus usb at c9100000: USB DWC2
>>>>>> scanning bus usb at c9100000 for devices... 2 USB Device(s) found
>>>>>> scanning usb for storage devices... 0 Storage Device(s)
>>>>>> found
>>>>>>
>>>>>>
>>>>>> Following you find a working boot from emmc:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:0;READ:0;CHK:0;
>>>>>> TE: 303447
>>>>>> no sdio debug board detected
>>>>>>
>>>>>> BL2 Built : 11:44:26, Nov 25 2015.
>>>>>> gxb gfb13a3b-c2 - jcao at wonton
>>>>>>
>>>>>> Board ID = 8
>>>>>> set vcck to 1100 mv
>>>>>> set vddee to 1050 mv
>>>>>> CPU clk: 1536MHz
>>>>>> DDR channel setting: DDR0 Rank0+1 same
>>>>>> DDR0: 2048MB(auto) @ 912MHz(2T)-13
>>>>>> DataBus test pass!
>>>>>> AddrBus test pass!
>>>>>> Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size:
>>>>>> 0x000000b0 Load bl30 from eMMC, src: 0x00010200, des: 0x01000000,
>>>>>> size:
>>>>>> 0x00009ef0 Sending bl30........................................OK.
>>>>>> Run bl30...
>>>>>> Load bl301 from eMMC, src: 0x0001c200, des: 0x01000000, size:
>>>>>> 0x000018c0
>>>>>> Wait bl30...Done
>>>>>> Sending bl301.......OK.
>>>>>> Run bl301...
>>>>>> MC, src: 0x00020200, des: 0x10100000, size: 0x00011130
>>>>>>
>>>>>>
>>>>>> --- UART initialized after reboot ---
>>>>>> [Reset cause: unknown]
>>>>>> [Image: unknown, amlogic_v1.1.3046-00db630-dirty 2016-08-31 09:24:14
>>>>>> tao.zeng at droid04] bl30: check_permit, count is 1
>>>>>> bl30: check_permit: ok!
>>>>>> chipidLoad bl33 from eMMC, src: 0x00034200, des: 0x01000000, size:
>>>>>> 0x0007da20
>>>>>> : ef be ad de d f0 ad ba ef be ad de not ES chip
>>>>>>
>>>>>> [0.418578 Inits done]
>>>>>> secure task start!
>>>>>> high task start!
>>>>>> low task start!
>>>>>> NOTICE: BL3-1: v1.0(debug):4d2e34d
>>>>>> NOTICE: BL3-1: Built : 17:08:35, Oct 29 2015
>>>>>> INFO: BL3-1: Initializing runtime services
>>>>>> INFO: BL3-1: Preparing for EL3 exit to normal world
>>>>>> INFO: BL3-1: Next image address = 0x1000000
>>>>>> INFO: BL3-1: Next image spsr = 0x3c9
>>>>>>
>>>>>>
>>>>>> U-Boot 2020.04 (Nov 17 2020 - 19:56:40 +0100) odroid-c2
>>>>>>
>>>>>> Model: Hardkernel ODROID-C2
>>>>>> SoC: Amlogic Meson GXBB (S905) Revision 1f:c (0:1)
>>>>>> DRAM: 2 GiB
>>>>>> MMC: mmc at 72000: 0, mmc at 74000: 1
>>>>>> In: serial
>>>>>> Out: serial
>>>>>> Err: serial
>>>>>> Net: eth0: ethernet at c9410000
>>>>>> Hit any key to stop autoboot: 0
>>>>>> CMD_SEND:0
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_NONE
>>>>>> CMD_SEND:8
>>>>>> ARG 0x000001aa
>>>>>> RET -110
>>>>>> CMD_SEND:55
>>>>>> ARG 0x00000000
>>>>>> RET -110
>>>>>> CMD_SEND:0
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_NONE
>>>>>> CMD_SEND:1
>>>>>> ARG 0x00000000
>>>>>> RET -110
>>>>>> Card did not respond to voltage select!
>>>>>> CMD_SEND:0
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_NONE
>>>>>> CMD_SEND:8
>>>>>> ARG 0x000001aa
>>>>>> RET -110
>>>>>> CMD_SEND:55
>>>>>> ARG 0x00000000
>>>>>> RET -110
>>>>>> CMD_SEND:0
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_NONE
>>>>>> CMD_SEND:1
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:0
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_NONE
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0x40ff8080
>>>>>> CMD_SEND:1
>>>>>> ARG 0x40380080
>>>>>> MMC_RSP_R3,4 0xc0ff8080
>>>>>> CMD_SEND:2
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R2 0x15010043
>>>>>> 0x4a544434
>>>>>> 0x52042550
>>>>>> 0xfa197700
>>>>>>
>>>>>> DUMPING DATA
>>>>>> 000 - 15 01 00 43
>>>>>> 004 - 4a 54 44 34
>>>>>> 008 - 52 04 25 50
>>>>>> 012 - fa 19 77 00
>>>>>> CMD_SEND:3
>>>>>> ARG 0x00010000
>>>>>> MMC_RSP_R1,5,6,7 0x00000500
>>>>>> CMD_SEND:9
>>>>>> ARG 0x00010000
>>>>>> MMC_RSP_R2 0xd0270132
>>>>>> 0x0f5903ff
>>>>>> 0xf6dbffef
>>>>>> 0x8e404000
>>>>>>
>>>>>> DUMPING DATA
>>>>>> 000 - d0 27 01 32
>>>>>> 004 - 0f 59 03 ff
>>>>>> 008 - f6 db ff ef
>>>>>> 012 - 8e 40 40 00
>>>>>> CMD_SEND:7
>>>>>> ARG 0x00010000
>>>>>> MMC_RSP_R1,5,6,7 0x00000700
>>>>>> CMD_SEND:8
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:6
>>>>>> ARG 0x03b70200
>>>>>> MMC_RSP_R1b 0x00000900
>>>>>> CMD_SEND:13
>>>>>> ARG 0x00010000
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CURR STATE:4
>>>>>> CMD_SEND:6
>>>>>> ARG 0x03b90100
>>>>>> MMC_RSP_R1b 0x00000900
>>>>>> CMD_SEND:13
>>>>>> ARG 0x00010000
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CURR STATE:4
>>>>>> CMD_SEND:8
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:8
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:17
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> switch to partitions #0, OK
>>>>>> mmc1(part 0) is current device
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:17
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:17
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:17
>>>>>> ARG 0x00000800
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> Scanning mmc 1:1...
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:17
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:17
>>>>>> ARG 0x00000800
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:18
>>>>>> ARG 0x00000844
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:12
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1b 0x00000b00
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:17
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:17
>>>>>> ARG 0x00000800
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:18
>>>>>> ARG 0x00000844
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:12
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1b 0x00000b00
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:17
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:17
>>>>>> ARG 0x00000800
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:18
>>>>>> ARG 0x00000844
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:12
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1b 0x00000b00
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:17
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:17
>>>>>> ARG 0x00000800
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:18
>>>>>> ARG 0x00000844
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:12
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1b 0x00000b00
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:17
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:17
>>>>>> ARG 0x00000800
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:18
>>>>>> ARG 0x00000844
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:12
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1b 0x00000b00
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:17
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:17
>>>>>> ARG 0x00000800
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:18
>>>>>> ARG 0x00000844
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:12
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1b 0x00000b00
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:17
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:17
>>>>>> ARG 0x00000800
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:18
>>>>>> ARG 0x00000844
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:12
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1b 0x00000b00
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:17
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:17
>>>>>> ARG 0x00000800
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:18
>>>>>> ARG 0x00000844
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:12
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1b 0x00000b00
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:17
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:17
>>>>>> ARG 0x00000800
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:18
>>>>>> ARG 0x00000844
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:12
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1b 0x00000b00
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:17
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:17
>>>>>> ARG 0x00000800
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:18
>>>>>> ARG 0x00000844
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:12
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1b 0x00000b00
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:18
>>>>>> ARG 0x00000868
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:12
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1b 0x00000b00
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:18
>>>>>> ARG 0x00000804
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:12
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1b 0x00000b00
>>>>>> CMD_SEND:16
>>>>>> ARG 0x00000200
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:18
>>>>>> ARG 0x0000086c
>>>>>> MMC_RSP_R1,5,6,7 0x00000900
>>>>>> CMD_SEND:12
>>>>>> ARG 0x00000000
>>>>>> MMC_RSP_R1b 0x00000b00
>>>>>> Found EFI removable media binary efi/boot/bootaa64.efi
>>>>>>
>>>>>>
>>>>>> This is the output from mmc info command u-boot 2020.04
>>>>>>
>>>>>> => mmc info
>>>>>> Device: mmc at 74000
>>>>>> Manufacturer ID: 15
>>>>>> OEM: 100
>>>>>> Name: CJTD4
>>>>>> Bus Speed: 52000000
>>>>>> Mode: MMC High Speed (52MHz)
>>>>>> Rd Block Len: 512
>>>>>> MMC version 5.1
>>>>>> High Capacity: Yes
>>>>>> Capacity: 58.2 GiB
>>>>>> Bus Width: 8-bit
>>>>>> Erase Group Size: 512 KiB
>>>>>> HC WP Group Size: 8 MiB
>>>>>> User Capacity: 58.2 GiB WRREL
>>>>>> Boot Capacity: 4 MiB ENH
>>>>>> RPMB Capacity: 4 MiB ENH
>>>>>> =>
>>>>>>
>>>>>> Any Idea?
>>>>>>
>>>>>> best regards
>>>>>>
>>>>>> Otto
>>>>>>
>>>>>> Am 16.11.20 um 23:39 schrieb Jaehoon Chung:
>>>>>>> Dear Otto,
>>>>>>>
>>>>>>> On 11/16/20 11:16 PM, Otto Meier wrote:
>>>>>>>> I tried to build an actual u-boot from git for my odroid-c2 board.
>>>>>>> Which git repository did you use?
>>>>>>> If you can enable CONFIG_MMC_TRACE, it's more helpful to debug.
>>>>>>>
>>>>>>>
>>>>>>> Best Regards,
>>>>>>> Jaehoon Chung
>>>>>>>
>>>>>>>> It doesn't find the emmc card and therefore does not boot from it.
>>>>>>>> emmc is Ok and boots with u-boot 2020.04 fine.
>>>>>>>>
>>>>>>>> Newer u-boot then 2020.04 show these messages:
>>>>>>>>
>>>>>>>> GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:0;READ:0;CHK:0;
>>>>>>>> TE: 156394
>>>>>>>> no sdio debug board detected
>>>>>>>>
>>>>>>>> BL2 Built : 11:44:26, Nov 25 2015.
>>>>>>>> gxb gfb13a3b-c2 - jcao at wonton
>>>>>>>>
>>>>>>>> Board ID = 8
>>>>>>>> set vcck to 1100 mv
>>>>>>>> set vddee to 1050 mv
>>>>>>>> CPU clk: 1536MHz
>>>>>>>> DDR channel setting: DDR0 Rank0+1 same
>>>>>>>> DDR0: 2048MB(auto) @ 912MHz(2T)-13
>>>>>>>> DataBus test pass!
>>>>>>>> AddrBus test pass!
>>>>>>>> Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size:
>>>>>>>> 0x000000b0 Load bl30 from eMMC, src: 0x00010200, des:
>>>>>>>> 0x01000000, size:
>>>>>>>> 0x00009ef0 Sending bl30........................................OK.
>>>>>>>> Run bl30...
>>>>>>>> Load bl301 from eMMC, src: 0x0001c200, des: 0x01000000, size:
>>>>>>>> 0x000018c0
>>>>>>>> Wait bl30...Done
>>>>>>>> Sending bl301.......OK.
>>>>>>>> Run bl301...
>>>>>>>> 31 from eMMC, src: 0x00020200, des: 0x10100000, size: 0x00011130
>>>>>>>>
>>>>>>>>
>>>>>>>> --- UART initialized after reboot ---
>>>>>>>> [Reset cause: unknown]
>>>>>>>> [Image: unknown, amlogic_v1.1.3046-00db630-dirty 2016-08-31
>>>>>>>> 09:24:14
>>>>>>>> tao.zeng at droid04] bl30: check_permit, count is 1
>>>>>>>> bl30: check_permit: ok!
>>>>>>>> chipidLoad bl33 from eMMC, src: 0x00034200, des: 0x01000000, size:
>>>>>>>> 0x0009e8f0>>
>>>>>>>> : ef be ad de d f0 ad ba ef be ad de not ES chip
>>>>>>>>
>>>>>>>> [0.271464 Inits done]
>>>>>>>> secure task start!
>>>>>>>> high task start!
>>>>>>>> low task start!
>>>>>>>> NOTICE: BL3-1: v1.0(debug):4d2e34d
>>>>>>>> NOTICE: BL3-1: Built : 17:08:35, Oct 29 2015
>>>>>>>> INFO: BL3-1: Initializing runtime services
>>>>>>>> INFO: BL3-1: Preparing for EL3 exit to normal world
>>>>>>>> INFO: BL3-1: Next image address = 0x1000000
>>>>>>>> INFO: BL3-1: Next image spsr = 0x3c9
>>>>>>>>
>>>>>>>>
>>>>>>>> U-Boot 2021.01-rc2 (Nov 15 2020 - 19:06:55 +0100) odroid-c2
>>>>>>>>
>>>>>>>> Model: Hardkernel ODROID-C2
>>>>>>>> SoC: Amlogic Meson GXBB (S905) Revision 1f:c (0:1)
>>>>>>>> DRAM: 2 GiB
>>>>>>>> MMC: mmc at 72000: 0, mmc at 74000: 1
>>>>>>>> In: serial
>>>>>>>> Out: serial
>>>>>>>> Err: serial
>>>>>>>> Net: eth0: ethernet at c9410000
>>>>>>>> Hit any key to stop autoboot: 0
>>>>>>>> Card did not respond to voltage select!
>>>>>>>> Card did not respond to voltage select!
>>>>>>>> MMC Device 2 not found
>>>>>>>> no mmc device at slot 2
>>>>>>>> starting USB...
>>>>>>>> Bus usb at c9100000: USB DWC2
>>>>>>>> scanning bus usb at c9100000 for devices... 2 USB Device(s) found
>>>>>>>>
>>>>>>>>
>>>>>>>> Does anybody know how to fixes this breakage?
>>>>>>>>
>>>>>>>> Best regards
>>>>>>>>
>>>>>>>> Otto
>>>>>
>>>>>
>>>>>
>>
>>
>
More information about the U-Boot
mailing list