[PATCH 2/8] rpi: Add identifier for the new CM4

[Nicolas Saenz Julienne]

On Thu, 2020-11-19 at 18:48 +0100, Nicolas Saenz Julienne wrote:
> The Raspberry Pi Foundation released the new Compute Module 4which we
> want to detect, so we can enable Ethernet on it and know the correct
> device tree file name.
> 
> Note that this sets the Ethernet option to true since the official CM4
> IO board has an Ethernet port. But that might not be the case when using
> custom ones.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne at suse.de>
> 
> ---
> ---
>  board/raspberrypi/rpi/rpi.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
> index ce60a24352..4ffd23c6ac 100644
> --- a/board/raspberrypi/rpi/rpi.c
> +++ b/board/raspberrypi/rpi/rpi.c
> @@ -162,6 +162,11 @@ static const struct rpi_model rpi_models_new_scheme[] = {
>  		DTB_DIR "bcm2711-rpi-4-b.dtb",
>  		true,
>  	},
> +	[0x14] = {
> +		"Compute Modue 4",
			     ^

Typo, should be Module.

Regards,
Nicolas

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: This is a digitally signed message part
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20201120/cde91575/attachment.sig>