[PATCHv2 24/25] configs: j7200_evm_r5: Enable raw access power management features

Tero Kristo t-kristo at ti.com
Fri Nov 20 12:23:25 CET 2020


From: Dave Gerlach <d-gerlach at ti.com>

Sysfw is not going to provide access to power management features in the
new architecture, so SPL must implement these itself. Enable all the raw
register access based clock + power domain drivers.

Signed-off-by: Dave Gerlach <d-gerlach at ti.com>
---
 configs/j7200_evm_r5_defconfig | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/configs/j7200_evm_r5_defconfig b/configs/j7200_evm_r5_defconfig
index 3820fc508b..6350020254 100644
--- a/configs/j7200_evm_r5_defconfig
+++ b/configs/j7200_evm_r5_defconfig
@@ -75,7 +75,7 @@ CONFIG_SPL_SYSCON=y
 CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_CLK=y
 CONFIG_SPL_CLK=y
-CONFIG_CLK_TI_SCI=y
+# CONFIG_CLK_TI_SCI is not set
 CONFIG_DMA_CHANNELS=y
 CONFIG_TI_K3_NAVSS_UDMA=y
 CONFIG_TI_SCI_PROTOCOL=y
@@ -110,7 +110,7 @@ CONFIG_SPL_PINCTRL=y
 # CONFIG_SPL_PINCTRL_GENERIC is not set
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_POWER_DOMAIN=y
-CONFIG_TI_SCI_POWER_DOMAIN=y
+# CONFIG_TI_SCI_POWER_DOMAIN is not set
 CONFIG_K3_SYSTEM_CONTROLLER=y
 CONFIG_REMOTEPROC_TI_K3_ARM64=y
 CONFIG_DM_RESET=y
@@ -142,3 +142,13 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x6164
 CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_FS_EXT4=y
 CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
+CONFIG_SOC_DEVICE=y
+CONFIG_SOC_DEVICE_TI_K3=y
+CONFIG_TI_POWER_DOMAIN=y
+CONFIG_SPL_CLK_CCF=y
+CONFIG_LIB_RATIONAL=y
+CONFIG_SPL_LIB_RATIONAL=y
+CONFIG_SPL_CLK_K3_PLL=y
+CONFIG_SPL_CLK_K3=y
+CONFIG_K3_DM_FW=y
+CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
-- 
2.17.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


More information about the U-Boot mailing list