[PATCH] cmd: Add a pwm command

[Pragnesh Patel]

Add the command "pwm" for controlling the pwm channels. This
command provides pwm invert/config/enable/disable functionalities
via PWM uclass drivers

Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com>
---
 cmd/Kconfig  |   6 +++
 cmd/Makefile |   1 +
 cmd/pwm.c    | 119 +++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 126 insertions(+)
 create mode 100644 cmd/pwm.c

diff --git a/cmd/Kconfig b/cmd/Kconfig
index 1595de999b..4f3a70b1d5 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -918,6 +918,12 @@ config CMD_GPIO
 	help
 	  GPIO support.
 
+config CMD_PWM
+	bool "pwm"
+	depends on DM_PWM
+	help
+	  PWM support.
+
 config CMD_GPT
 	bool "GPT (GUID Partition Table) command"
 	select EFI_PARTITION
diff --git a/cmd/Makefile b/cmd/Makefile
index dd86675bf2..75df3c136c 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -120,6 +120,7 @@ endif
 obj-$(CONFIG_CMD_PINMUX) += pinmux.o
 obj-$(CONFIG_CMD_PMC) += pmc.o
 obj-$(CONFIG_CMD_PSTORE) += pstore.o
+obj-$(CONFIG_CMD_PWM) += pwm.o
 obj-$(CONFIG_CMD_PXE) += pxe.o pxe_utils.o
 obj-$(CONFIG_CMD_WOL) += wol.o
 obj-$(CONFIG_CMD_QFW) += qfw.o
diff --git a/cmd/pwm.c b/cmd/pwm.c
new file mode 100644
index 0000000000..f82f7789cd
--- /dev/null
+++ b/cmd/pwm.c
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Control PWM channels
+ *
+ * Copyright (c) 2020 SiFive, Inc
+ * author: Pragnesh Patel <pragnesh.patel at sifive.com>
+ */
+
+#include <command.h>
+#include <dm.h>
+#include <pwm.h>
+
+enum pwm_cmd {
+	PWM_SET_INVERT,
+	PWM_SET_CONFIG,
+	PWM_SET_ENABLE,
+	PWM_SET_DISABLE,
+};
+
+static int do_pwm(struct cmd_tbl *cmdtp, int flag, int argc,
+		  char *const argv[])
+{
+	const char *str_cmd, *str_channel = NULL, *str_enable = NULL;
+	const char *str_pwm = NULL, *str_period = NULL, *str_duty = NULL;
+	enum pwm_cmd sub_cmd;
+	struct udevice *dev;
+	u32 channel, pwm_enable, period_ns = 0, duty_ns = 0;
+	int ret;
+
+	if (argc < 4)
+ show_usage:
+		return CMD_RET_USAGE;
+
+	str_cmd = argv[1];
+	argc -= 2;
+	argv += 2;
+
+	if (argc > 0) {
+		str_pwm = *argv;
+		argc--;
+		argv++;
+	}
+
+	if (!str_pwm)
+		goto show_usage;
+
+	switch (*str_cmd) {
+	case 'i':
+		sub_cmd = PWM_SET_INVERT;
+		break;
+	case 'c':
+		sub_cmd = PWM_SET_CONFIG;
+		break;
+	case 'e':
+		sub_cmd = PWM_SET_ENABLE;
+		break;
+	case 'd':
+		sub_cmd = PWM_SET_DISABLE;
+		break;
+	default:
+		goto show_usage;
+	}
+
+	if (IS_ENABLED(CONFIG_DM_PWM)) {
+		ret = uclass_get_device_by_name(UCLASS_PWM, str_pwm, &dev);
+		if (ret) {
+			printf("PWM: '%s' not found\n", str_pwm);
+			return cmd_process_error(cmdtp, ret);
+		}
+	}
+
+	if (argc > 0) {
+		str_channel = *argv;
+		channel = simple_strtoul(str_channel, NULL, 10);
+		argc--;
+		argv++;
+	} else {
+		goto show_usage;
+	}
+
+	if (sub_cmd == PWM_SET_INVERT && argc > 0) {
+		str_enable = *argv;
+		pwm_enable = simple_strtoul(str_enable, NULL, 10);
+		ret = pwm_set_invert(dev, channel, pwm_enable);
+	} else if (sub_cmd == PWM_SET_CONFIG && argc == 2) {
+		str_period = *argv;
+		argc--;
+		argv++;
+		period_ns = simple_strtoul(str_period, NULL, 10);
+
+		if (argc > 0) {
+			str_duty = *argv;
+			duty_ns = simple_strtoul(str_duty, NULL, 10);
+		}
+
+		ret = pwm_set_config(dev, channel, period_ns, duty_ns);
+	} else if (sub_cmd == PWM_SET_ENABLE) {
+		ret = pwm_set_enable(dev, channel, 1);
+	} else if (sub_cmd == PWM_SET_DISABLE) {
+		ret = pwm_set_enable(dev, channel, 0);
+	} else {
+		printf("PWM arguments missing\n");
+		return CMD_RET_FAILURE;
+	}
+
+	if (ret) {
+		printf("error!\n");
+		return CMD_RET_FAILURE;
+	}
+
+	printf("success!\n");
+	return CMD_RET_SUCCESS;
+}
+
+U_BOOT_CMD(pwm, 6, 0, do_pwm,
+	   "control pwm channels",
+	   "pwm <invert> <pwm_device> <channel> <polarity>\n"
+	   "pwm <config> <pwm_device> <channel> <period_ns> <duty_ns>\n"
+	   "pwm <enable/disable> <pwm_device> <channel>");
-- 
2.17.1