[PATCH v3 01/18] common: Kconfig: Introduce CONFIG_CONSOLE_RECORD_INIT_F

[Ovidiu Panait]

Currently, the following #ifdef construct is used to check whether to run
console_record_init() during pre-relocation init:
 defined(CONFIG_CONSOLE_RECORD) && CONFIG_VAL(SYS_MALLOC_F_LEN)

Introduce CONFIG_CONSOLE_RECORD_INIT_F Kconfig option to get rid of the
complex ifdef check. Also, use IS_ENABLED() instead of #ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait at windriver.com>
---
v3 updates:
- use only "default y" for CONSOLE_RECORD_INIT_F

v2 updates:
- new patch

 common/Kconfig   | 8 ++++++++
 common/board_f.c | 7 +++----
 2 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/common/Kconfig b/common/Kconfig
index 2bce8c9ba1..d8982ba377 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -17,6 +17,14 @@ config CONSOLE_RECORD
 	  To enable console recording, call console_record_reset_enable()
 	  from your code.
 
+config CONSOLE_RECORD_INIT_F
+	bool "Enable console recording during pre-relocation init"
+	depends on CONSOLE_RECORD && SYS_MALLOC_F
+	default y
+	help
+	  This option enables console recording during pre-relocation init.
+	  CONFIG_SYS_MALLOC_F must be enabled to use this feature.
+
 config CONSOLE_RECORD_OUT_SIZE
 	hex "Output buffer size"
 	depends on CONSOLE_RECORD
diff --git a/common/board_f.c b/common/board_f.c
index 9f441c44f1..e5e69ff0fa 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -767,11 +767,10 @@ static int initf_bootstage(void)
 
 static int initf_console_record(void)
 {
-#if defined(CONFIG_CONSOLE_RECORD) && CONFIG_VAL(SYS_MALLOC_F_LEN)
-	return console_record_init();
-#else
+	if (IS_ENABLED(CONFIG_CONSOLE_RECORD_INIT_F))
+		return console_record_init();
+
 	return 0;
-#endif
 }
 
 static int initf_dm(void)
-- 
2.17.1