[PATCH v9 04/11] efi_loader: capsule: support firmware update
AKASHI Takahiro
takahiro.akashi at linaro.org
Tue Nov 24 09:31:02 CET 2020
Sughosh,
On Tue, Nov 24, 2020 at 01:07:53PM +0530, Sughosh Ganu wrote:
> Takahiro,
>
> On Tue, 24 Nov 2020 at 11:21, AKASHI Takahiro <takahiro.akashi at linaro.org>
> wrote:
>
> > Sughosh,
> >
> > On Sat, Nov 21, 2020 at 11:32:43PM +0530, Sughosh Ganu wrote:
> > > hi Takahiro,
> > >
> > > On Tue, 17 Nov 2020 at 05:58, AKASHI Takahiro <
> > takahiro.akashi at linaro.org>
> > > wrote:
> > >
> > > > A capsule tagged with the guid,
> > EFI_FIRMWARE_MANAGEMENT_CAPSULE_ID_GUID,
> > > > is handled as a firmware update object.
> > > > What efi_update_capsule() basically does is to load any firmware
> > management
> > > > protocol (or fmp) drivers contained in a capsule, find out an
> > appropriate
> > > > fmp driver and then invoke its set_image() interface against each
> > binary
> > > > in a capsule.
> > > > In this commit, however, loading drivers is not supported.
> > > >
> > > > The result of applying a capsule is set to be stored in "CapsuleXXXX"
> > > > variable, but its implementation is deferred to a fmp driver.
> > > >
> > > > Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>
> > > > ---
> > > > include/efi_api.h | 129 +++++++++++++++++++
> > > > include/efi_loader.h | 2 +
> > > > lib/efi_loader/Kconfig | 8 ++
> > > > lib/efi_loader/efi_capsule.c | 238 ++++++++++++++++++++++++++++++++++-
> > > > lib/efi_loader/efi_setup.c | 4 +
> > > > 5 files changed, 380 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/include/efi_api.h b/include/efi_api.h
> > > > index 7a2a087c60ed..966bc6e590bf 100644
> > > > --- a/include/efi_api.h
> > > > +++ b/include/efi_api.h
> > > > @@ -217,6 +217,9 @@ enum efi_reset_type {
> > > > #define CAPSULE_FLAGS_POPULATE_SYSTEM_TABLE 0x00020000
> > > > #define CAPSULE_FLAGS_INITIATE_RESET 0x00040000
> > > >
> > > > +#define CAPSULE_SUPPORT_AUTHENTICATION 0x0000000000000001
> > > > +#define CAPSULE_SUPPORT_DEPENDENCY 0x0000000000000002
> > > > +
> > > > #define EFI_CAPSULE_REPORT_GUID \
> > > > EFI_GUID(0x39b68c46, 0xf7fb, 0x441b, 0xb6, 0xec, \
> > > > 0x16, 0xb0, 0xf6, 0x98, 0x21, 0xf3)
> > > > @@ -225,6 +228,10 @@ enum efi_reset_type {
> > > > EFI_GUID(0xde9f0ec, 0x88b6, 0x428f, 0x97, 0x7a, \
> > > > 0x25, 0x8f, 0x1d, 0xe, 0x5e, 0x72)
> > > >
> > > > +#define EFI_FIRMWARE_MANAGEMENT_CAPSULE_ID_GUID \
> > > > + EFI_GUID(0x6dcbd5ed, 0xe82d, 0x4c44, 0xbd, 0xa1, \
> > > > + 0x71, 0x94, 0x19, 0x9a, 0xd9, 0x2a)
> > > > +
> > > > struct efi_capsule_header {
> > > > efi_guid_t capsule_guid;
> > > > u32 header_size;
> > > > @@ -253,6 +260,33 @@ struct efi_memory_range_capsule {
> > > > struct efi_memory_range memory_ranges[];
> > > > } __packed;
> > > >
> > > > +struct efi_firmware_management_capsule_header {
> > > > + u32 version;
> > > > + u16 embedded_driver_count;
> > > > + u16 payload_item_count;
> > > > + u64 item_offset_list[];
> > > > +} __packed;
> > > > +
> > > > +struct efi_firmware_management_capsule_image_header {
> > > > + u32 version;
> > > > + efi_guid_t update_image_type_id;
> > > > + u8 update_image_index;
> > > > + u8 reserved[3];
> > > > + u32 update_image_size;
> > > > + u32 update_vendor_code_size;
> > > > + u64 update_hardware_instance;
> > > > + u64 image_capsule_support;
> > > > +} __packed;
> > > > +
> > > > +struct efi_capsule_result_variable_fmp {
> > > > + u16 version;
> > > > + u8 payload_index;
> > > > + u8 update_image_index;
> > > > + efi_guid_t update_image_type_id;
> > > > + // u16 capsule_file_name[];
> > > > + // u16 capsule_target[];
> > > > +} __packed;
> > > > +
> > > >
> > >
> > > <snip>
> > >
> > >
> > > > +/**
> > > > + * efi_capsule_update_firmware - update firmware from capsule
> > > > + * @capsule_data: Capsule
> > > > + *
> > > > + * Update firmware, using a capsule, @capsule_data. Loading any FMP
> > > > + * drivers embedded in a capsule is not supported.
> > > > + *
> > > > + * Return: status code
> > > > + */
> > > > +static efi_status_t efi_capsule_update_firmware(
> > > > + struct efi_capsule_header *capsule_data)
> > > > +{
> > > > + struct efi_firmware_management_capsule_header *capsule;
> > > > + struct efi_firmware_management_capsule_image_header *image;
> > > > + size_t capsule_size;
> > > > + void *image_binary, *vendor_code;
> > > > + efi_handle_t *handles;
> > > > + efi_uintn_t no_handles;
> > > > + int item;
> > > > + struct efi_firmware_management_protocol *fmp;
> > > > + u16 *abort_reason;
> > > > + efi_status_t ret = EFI_SUCCESS;
> > > > +
> > > > + /* sanity check */
> > > > + if (capsule_data->header_size < sizeof(*capsule) ||
> > > > + capsule_data->header_size >=
> > capsule_data->capsule_image_size)
> > > > + return EFI_INVALID_PARAMETER;
> > > > +
> > > > + capsule = (void *)capsule_data + capsule_data->header_size;
> > > > + capsule_size = capsule_data->capsule_image_size
> > > > + - capsule_data->header_size;
> > > > +
> > > > + if (capsule->version != 0x00000001)
> > > > + return EFI_INVALID_PARAMETER;
> > > > +
> > > > + /* Drivers */
> > > > + /* TODO: support loading drivers */
> > > > +
> > > > + handles = NULL;
> > > > + ret = EFI_CALL(efi_locate_handle_buffer(
> > > > + BY_PROTOCOL,
> > > > + &efi_guid_firmware_management_protocol,
> > > > + NULL, &no_handles, (efi_handle_t **)&handles));
> > > > + if (ret != EFI_SUCCESS)
> > > > + return EFI_UNSUPPORTED;
> > > > +
> > > > + /* Payload */
> > > > + for (item = capsule->embedded_driver_count;
> > > > + item < capsule->embedded_driver_count
> > > > + + capsule->payload_item_count; item++) {
> > > > + /* sanity check */
> > > > + if ((capsule->item_offset_list[item] + sizeof(*image)
> > > > + >= capsule_size)) {
> > > > + printf("EFI: A capsule has not enough size of
> > > > data\n");
> > > > + ret = EFI_INVALID_PARAMETER;
> > > > + goto out;
> > > > + }
> > > > +
> > > > + image = (void *)capsule +
> > capsule->item_offset_list[item];
> > > > +
> > > > + if (image->version != 0x00000001 &&
> > > > + image->version != 0x00000002 &&
> > > > + image->version != 0x00000003) {
> > > > + ret = EFI_INVALID_PARAMETER;
> > > > + goto out;
> > > > + }
> > > > +
> > > > + /* find a device for update firmware */
> > > > + /* TODO: should we pass index as well, or nothing but
> > > > type? */
> > > > + fmp = efi_fmp_find(&image->update_image_type_id,
> > > > + image->version == 0x1 ? 0 :
> > > > +
> > image->update_hardware_instance,
> > > > + handles, no_handles);
> > > > + if (!fmp) {
> > > > + printf("EFI Capsule: driver not found for
> > firmware
> > > > type: %pUl, hardware instance: %lld\n",
> > > > + &image->update_image_type_id,
> > > > + image->version == 0x1 ? 0 :
> > > > +
> > image->update_hardware_instance);
> > > > + ret = EFI_UNSUPPORTED;
> > > > + goto out;
> > > > + }
> > > > +
> > > > + /* do it */
> > > > + image_binary = (void *)image + sizeof(*image);
> > > >
> > >
> > > Sorry for not having spotted this earlier. But since we are supporting
> > the
> > > first three versions of the struct
> > > efi_firmware_management_capsule_image_header, the above logic needs to be
> > > changed to accomodate versions 1 and 2. So in case of a version 1
> > > structure, the fields update_hardware_instance and image_capsule_support
> > > need to be discarded. Similarly for a version 2 structure, the
> > > image_capsule_support field needs to be discarded while calculating the
> > > image_binary pointer.
> >
> > Thank you for catching this issue, you're right.
> >
> > Given, however, that the firmware update is quite firmware-specific
> > and that we don't have any "backward compatibility" requirement,
> > it would be better to simply drop the support for previous versions
> > and to support the current/latest one, in this case, 3.
> >
>
> The edk2 scripts which i use for generating the capsules are currently
> using version 2.
Personally, I think edk2's script should be updated to catch up with
the latest specification.
> So if it's not too much of a hassle, i will prefer having
> support for version 2 at least. However, if you don't want to respin the
> series again, I can take care of this in my series for adding support for
> capsule update on the qemu arm platform.
I will have to respin the code to drop the current "half-baked"
support for previous versions if Heinrich anticipates it.
After that, it's up to you to implement additional support
as a follow-up patch.
-Takahiro Akashi
> -sughosh
>
>
> > We have a similar issue on 'struct efi_firmware_image_descriptor'.
> > I hope that imposing a version check/restriction won't bring any
> > inconvenience to anybody.
> >
> > -Takahiro Akashi
> >
> > > -sughosh
> >
More information about the U-Boot
mailing list