[PATCH] ARM: dts: stm32: Add DHCOM based PicoITX board

[Patrick DELAUNAY]

Hi,

> From: Marek Vasut <marex at denx.de>
> Sent: mardi 3 novembre 2020 19:15
> 
> Add DT for DH PicoITX unit, which is a bare-bones carrier board for the DHCOM.
> The board has ethernet port, USB, CAN, LEDs and a custom board-to-board
> expansion connector.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Patrice Chotard <patrice.chotard at st.com>
> Cc: Patrick Delaunay <patrick.delaunay at st.com>
> ---
>  arch/arm/dts/Makefile                         |  1 +
>  .../dts/stm32mp15xx-dhcom-picoitx-u-boot.dtsi | 14 +++
>  arch/arm/dts/stm32mp15xx-dhcom-picoitx.dts    | 93 +++++++++++++++++++
>  .../dh_stm32mp1/u-boot-dhcom.its              | 22 +++++
>  configs/stm32mp15_dhcom_basic_defconfig       |  2 +-
>  5 files changed, 131 insertions(+), 1 deletion(-)  create mode 100644
> arch/arm/dts/stm32mp15xx-dhcom-picoitx-u-boot.dtsi
>  create mode 100644 arch/arm/dts/stm32mp15xx-dhcom-picoitx.dts
> 

Reviewed-by: Patrick Delaunay <patrick.delaunay at st.com>

Applied to u-boot-stm/master, thanks!

Thanks

Patrick