[PATCH] arm: ls102xa: select USB PHY erratum's only if USB support is enabled

[Aleksandar Gerasimovski]

The USB support is not by default enabled on all designs, so it does not
make seance to have USB specific erratum's enabled on such a designs.

On our internal Hitachi-Powergrids design not using the USB controller
there is a crash when accessing those specific memory locations selected
by the erratum flags.

Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski at hitachi-powergrids.com>
---
 arch/arm/cpu/armv7/ls102xa/Kconfig | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig
index 937989b..747059b 100644
--- a/arch/arm/cpu/armv7/ls102xa/Kconfig
+++ b/arch/arm/cpu/armv7/ls102xa/Kconfig
@@ -5,11 +5,11 @@ config ARCH_LS1021A
 	select SYS_FSL_ERRATUM_A008378
 	select SYS_FSL_ERRATUM_A008407
 	select SYS_FSL_ERRATUM_A008850
-	select SYS_FSL_ERRATUM_A008997
-	select SYS_FSL_ERRATUM_A009007
-	select SYS_FSL_ERRATUM_A009008
+	select SYS_FSL_ERRATUM_A008997 if USB
+	select SYS_FSL_ERRATUM_A009007 if USB
+	select SYS_FSL_ERRATUM_A009008 if USB
 	select SYS_FSL_ERRATUM_A009663
-	select SYS_FSL_ERRATUM_A009798
+	select SYS_FSL_ERRATUM_A009798 if USB
 	select SYS_FSL_ERRATUM_A009942
 	select SYS_FSL_ERRATUM_A010315
 	select SYS_FSL_HAS_CCI400
-- 
1.8.3.1