[PATCH v7 1/4] arm: rmobile: Add HopeRun HiHope RZ/G2M board support

Biju Das biju.das.jz at bp.renesas.com
Fri Nov 27 16:11:55 CET 2020


The HiHope RZ/G2M board from HopeRun consists of main board
(HopeRun HiHope RZ/G2M main board) and sub board(HopeRun
HiHope RZ/G2M sub board). The HiHope RZ/G2M sub board sits
below the HiHope RZ/G2M main board.

DTS files apart from r8a774a1-hihope-rzg2m-u-boot.dts and
r8a774a1-u-boot.dtsi have been imported from linux 5.9 commit
bbf5c979011a ("Linux 5.9").

This patch adds the required board support to boot HopeRun HiHope
RZ/G2M board.

Signed-off-by: Biju Das <biju.das.jz at bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
---
V6->V7
 * Seperated driver patches from board support patches.
v5->v6
  * Rebased to U-boot-sh/master
  * Changed the logic for USB0 channel0 Host support.
  * Enabled CONFIG_SOC_DEVICE_RENESAS option

V4->V5
  * Rebased to U-boot-sh/next
  (Ref: https://patchwork.ozlabs.org/project/uboot/patch/20201012151616.5384-4-biju.das.jz@bp.renesas.com/)

V3->V4
  * Added USB0 channel0 Host support
    (Ref: https://patchwork.ozlabs.org/project/uboot/patch/20201001103658.4835-2-biju.das.jz@bp.renesas.com/)
V2->V3  
   * Reworked as per Marek's suggestion
   * Added rzg2_get_cpu_type function to get cpu_type by matching TFA compatible string
   * Removed SoC family type Enum
   Ref: https://patchwork.ozlabs.org/project/uboot/patch/20200922160317.16296-3-biju.das.jz@bp.renesas.com/

V1->V2
 * Fixed indentation for R8A774A1 config
 * Used GPIO hog for setting WLAN/BT REG ON
 * Removed USB related initialization
  Ref: https://patchwork.ozlabs.org/project/uboot/patch/20200918160307.14323-2-biju.das.jz@bp.renesas.com/

V1:-
 * New Patch
 Ref: https://patchwork.ozlabs.org/project/uboot/patch/20200915143630.7678-5-biju.das.jz@bp.renesas.com/
---
 arch/arm/dts/Makefile                         |   1 +
 arch/arm/dts/hihope-common.dtsi               | 377 ++++++++++++++++++
 arch/arm/dts/hihope-rev4.dtsi                 | 124 ++++++
 arch/arm/dts/hihope-rzg2-ex.dtsi              |  92 +++++
 arch/arm/dts/r8a774a1-hihope-rzg2m-ex.dts     |  21 +
 arch/arm/dts/r8a774a1-hihope-rzg2m-u-boot.dts |  27 ++
 arch/arm/dts/r8a774a1-hihope-rzg2m.dts        |  37 ++
 arch/arm/dts/r8a774a1-u-boot.dtsi             |  55 +++
 arch/arm/mach-rmobile/Kconfig.64              |  14 +
 board/hoperun/hihope-rzg2/Kconfig             |  15 +
 board/hoperun/hihope-rzg2/MAINTAINERS         |   6 +
 board/hoperun/hihope-rzg2/Makefile            |   9 +
 board/hoperun/hihope-rzg2/hihope-rzg2.c       |  91 +++++
 configs/hihope_rzg2_defconfig                 |  77 ++++
 include/configs/hihope-rzg2.h                 |  20 +
 15 files changed, 966 insertions(+)
 create mode 100644 arch/arm/dts/hihope-common.dtsi
 create mode 100644 arch/arm/dts/hihope-rev4.dtsi
 create mode 100644 arch/arm/dts/hihope-rzg2-ex.dtsi
 create mode 100644 arch/arm/dts/r8a774a1-hihope-rzg2m-ex.dts
 create mode 100644 arch/arm/dts/r8a774a1-hihope-rzg2m-u-boot.dts
 create mode 100644 arch/arm/dts/r8a774a1-hihope-rzg2m.dts
 create mode 100644 arch/arm/dts/r8a774a1-u-boot.dtsi
 create mode 100644 board/hoperun/hihope-rzg2/Kconfig
 create mode 100644 board/hoperun/hihope-rzg2/MAINTAINERS
 create mode 100644 board/hoperun/hihope-rzg2/Makefile
 create mode 100644 board/hoperun/hihope-rzg2/hihope-rzg2.c
 create mode 100644 configs/hihope_rzg2_defconfig
 create mode 100644 include/configs/hihope-rzg2.h

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 7d1a369845..17e19ad362 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -798,6 +798,7 @@ dtb-$(CONFIG_RCAR_GEN2) += \
 
 dtb-$(CONFIG_RCAR_GEN3) += \
 	r8a774a1-beacon-rzg2m-kit.dtb \
+	r8a774a1-hihope-rzg2m-u-boot.dtb \
 	r8a77950-ulcb-u-boot.dtb \
 	r8a77950-salvator-x-u-boot.dtb \
 	r8a77960-ulcb-u-boot.dtb \
diff --git a/arch/arm/dts/hihope-common.dtsi b/arch/arm/dts/hihope-common.dtsi
new file mode 100644
index 0000000000..51eb74fbe9
--- /dev/null
+++ b/arch/arm/dts/hihope-common.dtsi
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H Rev.4.0 and
+ * HiHope RZ/G2[MN] Rev.[2.0/3.0/4.0] main board common parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &scif2;
+		serial1 = &hscif0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi0-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con: endpoint {
+				remote-endpoint = <&rcar_dw_hdmi0_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		led2 {
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led3 {
+			gpios = <&gpio0  0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led4 {
+			gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_1p8v: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound_card: sound {
+		compatible = "audio-graph-card";
+
+		label = "rcar-sound";
+
+		dais = <&rsnd_port>;
+	};
+
+	vbus0_usb2: regulator-vbus0-usb2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB20_VBUS0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	x302_clk: x302-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33000000>;
+	};
+
+	x304_clk: x304-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+};
+
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
+&du {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&gpio6 {
+	usb1-reset {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "usb1-reset";
+	};
+};
+
+&hdmi0 {
+	status = "okay";
+
+	ports {
+		port at 1 {
+			reg = <1>;
+			rcar_dw_hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi0_con>;
+			};
+		};
+		port at 2 {
+			reg = <2>;
+			dw_hdmi0_snd_in: endpoint {
+				remote-endpoint = <&rsnd_endpoint>;
+			};
+		};
+	};
+};
+
+&hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	versaclock5: clock-generator at 6a {
+		compatible = "idt,5p49v5923";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x304_clk>;
+		clock-names = "xin";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data", "hscif0_ctrl";
+		function = "hscif0";
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	sdhi3_pins: sd3 {
+		groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
+		function = "sdhi3";
+		power-source = <1800>;
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		mux {
+			groups = "usb1";
+			function = "usb1";
+		};
+
+		ovc {
+			pins = "GP_6_27";
+			bias-pull-up;
+		};
+	};
+
+	usb30_pins: usb30 {
+		groups = "usb30";
+		function = "usb30";
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi2 {
+	status = "okay";
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore at 2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&sdhi3 {
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-1 = <&sdhi3_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
+
+&usb_extal_clk {
+	clock-frequency = <50000000>;
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	vbus-supply = <&vbus0_usb2>;
+	status = "okay";
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usb3_peri0 {
+	phys = <&usb3_phy0>;
+	phy-names = "usb";
+
+	companion = <&xhci0>;
+
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3s0_clk {
+	clock-frequency = <100000000>;
+};
+
+&xhci0 {
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm/dts/hihope-rev4.dtsi b/arch/arm/dts/hihope-rev4.dtsi
new file mode 100644
index 0000000000..3046c07a28
--- /dev/null
+++ b/arch/arm/dts/hihope-rev4.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H Rev.4.0 and
+ * HiHope RZ/G2[MN] Rev.3.0/4.0 main board common parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "hihope-common.dtsi"
+
+/ {
+	audio_clkout: audio-clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	wlan_en_reg: regulator-wlan_en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <70000>;
+
+		gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	x1801_clk: x1801-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&hscif0 {
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	cs2000: clk_multiplier at 4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x1801_clk>;
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+};
+
+&pfc {
+	i2c2_pins: i2c2 {
+		groups = "i2c2_a";
+		function = "i2c2";
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clkout_a";
+		function = "audio_clk";
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		function = "ssi";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <12288000 11289600>;
+
+	/* update <audio_clk_b> to <cs2000> */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&cs2000>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+
+	rsnd_port: port {
+		rsnd_endpoint: endpoint {
+			remote-endpoint = <&dw_hdmi0_snd_in>;
+
+			dai-format = "i2s";
+			bitclock-master = <&rsnd_endpoint>;
+			frame-master = <&rsnd_endpoint>;
+
+			playback = <&ssi2>;
+		};
+	};
+};
diff --git a/arch/arm/dts/hihope-rzg2-ex.dtsi b/arch/arm/dts/hihope-rzg2-ex.dtsi
new file mode 100644
index 0000000000..73dd14245f
--- /dev/null
+++ b/arch/arm/dts/hihope-rzg2-ex.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZ/G2[HMN] HiHope sub board common parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/ {
+	aliases {
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-txid";
+	status = "okay";
+
+	phy0: ethernet-phy at 0 {
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pciec0 {
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	avb_pins: avb {
+		mux {
+			groups = "avb_link", "avb_mdio", "avb_mii";
+			function = "avb";
+		};
+
+		pins_mdio {
+			groups = "avb_mdio";
+			drive-strength = <24>;
+		};
+
+		pins_mii_tx {
+			pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+			       "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+			drive-strength = <12>;
+		};
+	};
+
+	can0_pins: can0 {
+		groups = "can0_data_a";
+		function = "can0";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data";
+		function = "can1";
+	};
+
+	pwm0_pins: pwm0 {
+		groups = "pwm0";
+		function = "pwm0";
+	};
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm/dts/r8a774a1-hihope-rzg2m-ex.dts b/arch/arm/dts/r8a774a1-hihope-rzg2m-ex.dts
new file mode 100644
index 0000000000..a5ca86196a
--- /dev/null
+++ b/arch/arm/dts/r8a774a1-hihope-rzg2m-ex.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 connected to
+ * sub board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2M with sub board";
+	compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m",
+		     "renesas,r8a774a1";
+};
+
+/* SW43 should be OFF, if in ON state SATA port will be activated */
+&pciec1 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/r8a774a1-hihope-rzg2m-u-boot.dts b/arch/arm/dts/r8a774a1-hihope-rzg2m-u-boot.dts
new file mode 100644
index 0000000000..4881801eea
--- /dev/null
+++ b/arch/arm/dts/r8a774a1-hihope-rzg2m-u-boot.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the Hihope RZ/G2M board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corporation
+ */
+
+#include "r8a774a1-hihope-rzg2m-ex.dts"
+#include "r8a774a1-u-boot.dtsi"
+
+&gpio3 {
+	bt_reg_on{
+		gpio-hog;
+		gpios = <13 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "bt-reg-on";
+	};
+};
+
+&gpio4 {
+	wlan_reg_on{
+		gpio-hog;
+		gpios = <6 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "wlan-reg-on";
+	};
+};
diff --git a/arch/arm/dts/r8a774a1-hihope-rzg2m.dts b/arch/arm/dts/r8a774a1-hihope-rzg2m.dts
new file mode 100644
index 0000000000..25ae255de0
--- /dev/null
+++ b/arch/arm/dts/r8a774a1-hihope-rzg2m.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 main board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774a1.dtsi"
+#include "hihope-rev4.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2M main board based on r8a774a1";
+	compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1";
+
+	memory at 48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory at 600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock5 1>,
+		 <&x302_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm/dts/r8a774a1-u-boot.dtsi b/arch/arm/dts/r8a774a1-u-boot.dtsi
new file mode 100644
index 0000000000..86be1af351
--- /dev/null
+++ b/arch/arm/dts/r8a774a1-u-boot.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot on RZ/G2 R8A774A1 SoC
+ *
+ * Copyright (C) 2020 Renesas Electronics Corporation
+ */
+
+#include "r8a779x-u-boot.dtsi"
+
+&extalr_clk {
+	u-boot,dm-pre-reloc;
+};
+
+/delete-node/ &audma0;
+/delete-node/ &audma1;
+/delete-node/ &can0;
+/delete-node/ &can1;
+/delete-node/ &canfd;
+/delete-node/ &csi20;
+/delete-node/ &csi40;
+/delete-node/ &du;
+/delete-node/ &fcpf0;
+/delete-node/ &fcpvb0;
+/delete-node/ &fcpvd0;
+/delete-node/ &fcpvd1;
+/delete-node/ &fcpvd2;
+/delete-node/ &fcpvi0;
+/delete-node/ &hdmi0;
+/delete-node/ &lvds0;
+/delete-node/ &rcar_sound;
+/delete-node/ &sdhi2;
+/delete-node/ &sound_card;
+/delete-node/ &vin0;
+/delete-node/ &vin1;
+/delete-node/ &vin2;
+/delete-node/ &vin3;
+/delete-node/ &vin4;
+/delete-node/ &vin5;
+/delete-node/ &vin6;
+/delete-node/ &vin7;
+/delete-node/ &vspb;
+/delete-node/ &vspd0;
+/delete-node/ &vspd1;
+/delete-node/ &vspd2;
+/delete-node/ &vspi0;
+
+/ {
+	/delete-node/ hdmi0-out;
+};
+
+/ {
+	soc {
+		/delete-node/ fdp1 at fe940000;
+	};
+};
diff --git a/arch/arm/mach-rmobile/Kconfig.64 b/arch/arm/mach-rmobile/Kconfig.64
index 0ef6cf619b..47ca4bfb2e 100644
--- a/arch/arm/mach-rmobile/Kconfig.64
+++ b/arch/arm/mach-rmobile/Kconfig.64
@@ -4,6 +4,8 @@ menu "Select Target SoC"
 
 config R8A774A1
 	bool "Renesas SoC R8A774A1"
+	imply CLK_R8A774A1
+	imply PINCTRL_PFC_R8A774A1
 
 config R8A774B1
 	bool "Renesas SoC R8A774B1"
@@ -89,6 +91,15 @@ config TARGET_EBISU
 	help
           Support for Renesas R-Car Gen3 Ebisu platform
 
+config TARGET_HIHOPE_RZG2
+	bool "HiHope RZ/G2 board"
+	imply R8A774A1
+	imply SYS_MALLOC_F
+	imply MULTI_DTB_FIT
+	imply MULTI_DTB_FIT_USER_DEFINED_AREA
+	help
+          Support for RZG2 HiHope platform
+
 config TARGET_SALVATOR_X
 	bool "Salvator-X board"
 	imply R8A7795
@@ -123,12 +134,15 @@ source "board/renesas/ebisu/Kconfig"
 source "board/renesas/salvator-x/Kconfig"
 source "board/renesas/ulcb/Kconfig"
 source "board/beacon/beacon-rzg2m/Kconfig"
+source "board/hoperun/hihope-rzg2/Kconfig"
 
 config MULTI_DTB_FIT_UNCOMPRESS_SZ
+	default 0x80000 if TARGET_HIHOPE_RZG2
 	default 0x80000 if TARGET_SALVATOR_X
 	default 0x80000 if TARGET_ULCB
 
 config MULTI_DTB_FIT_USER_DEF_ADDR
+	default 0x49000000 if TARGET_HIHOPE_RZG2
 	default 0x49000000 if TARGET_SALVATOR_X
 	default 0x49000000 if TARGET_ULCB
 
diff --git a/board/hoperun/hihope-rzg2/Kconfig b/board/hoperun/hihope-rzg2/Kconfig
new file mode 100644
index 0000000000..ee422ba6c8
--- /dev/null
+++ b/board/hoperun/hihope-rzg2/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_HIHOPE_RZG2
+
+config SYS_SOC
+	default "rmobile"
+
+config SYS_BOARD
+	default "hihope-rzg2"
+
+config SYS_VENDOR
+	default "hoperun"
+
+config SYS_CONFIG_NAME
+	default "hihope-rzg2"
+
+endif
diff --git a/board/hoperun/hihope-rzg2/MAINTAINERS b/board/hoperun/hihope-rzg2/MAINTAINERS
new file mode 100644
index 0000000000..e3702fd12e
--- /dev/null
+++ b/board/hoperun/hihope-rzg2/MAINTAINERS
@@ -0,0 +1,6 @@
+HIHOPE_RZG2 BOARD
+M:	Biju Das <biju.das.jz at bp.renesas.com>
+S:	Maintained
+F:	board/hoperun/hihope-rzg2/
+F:	include/configs/hihope-rzg2.h
+F:	configs/hihope_rzg2_defconfig
diff --git a/board/hoperun/hihope-rzg2/Makefile b/board/hoperun/hihope-rzg2/Makefile
new file mode 100644
index 0000000000..44f5da227c
--- /dev/null
+++ b/board/hoperun/hihope-rzg2/Makefile
@@ -0,0 +1,9 @@
+#
+# board/hoperun/hihope-rzg2/Makefile
+#
+# Copyright (C) 2020 Renesas Electronics Corporation
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y	:= hihope-rzg2.o ../../renesas/rcar-common/common.o
diff --git a/board/hoperun/hihope-rzg2/hihope-rzg2.c b/board/hoperun/hihope-rzg2/hihope-rzg2.c
new file mode 100644
index 0000000000..d49ad78871
--- /dev/null
+++ b/board/hoperun/hihope-rzg2/hihope-rzg2.c
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * board/hoperun/hihope-rzg2/hihope-rzg2.c
+ *     This file is HiHope RZ/G2M board support.
+ *
+ * Copyright (C) 2020 Renesas Electronics Corporation
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/arch/rmobile.h>
+#include <asm/arch/rcar-mstp.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/libfdt.h>
+
+#define RST_BASE	0xE6160000
+#define RST_CA57RESCNT	(RST_BASE + 0x40)
+#define RST_CA53RESCNT	(RST_BASE + 0x44)
+#define RST_CA57_CODE	0xA5A5000F
+#define RST_CA53_CODE	0x5A5A000F
+
+DECLARE_GLOBAL_DATA_PTR;
+#define HSUSB_MSTP704		BIT(4)	/* HSUSB */
+
+/* HSUSB block registers */
+#define HSUSB_REG_LPSTS			0xE6590102
+#define HSUSB_REG_LPSTS_SUSPM_NORMAL	BIT(14)
+#define HSUSB_REG_UGCTRL2		0xE6590184
+#define HSUSB_REG_UGCTRL2_USB0SEL_EHCI	0x10
+#define HSUSB_REG_UGCTRL2_RESERVED_3	0x1 /* bit[3:0] should be B'0001 */
+
+#define PRR_REGISTER (0xFFF00044)
+
+int board_init(void)
+{
+	u32 i;
+
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = CONFIG_SYS_TEXT_BASE + 0x50000;
+
+	/* Configure the HSUSB block */
+	mstp_clrbits_le32(SMSTPCR7, SMSTPCR7, HSUSB_MSTP704);
+	/*
+	 * We need to add a barrier instruction after HSUSB module stop release.
+	 * This barrier instruction can be either reading back the same MSTP
+	 * register or any other register in the same IP block. So like linux
+	 * adding check for MSTPSR register, which indicates the clock has been
+	 * started.
+	 */
+	for (i = 1000; i > 0; --i) {
+		if (!(readl(MSTPSR7) & HSUSB_MSTP704))
+			break;
+		cpu_relax();
+	}
+
+	/* Select EHCI/OHCI host module for USB2.0 ch0 */
+	writel(HSUSB_REG_UGCTRL2_USB0SEL_EHCI | HSUSB_REG_UGCTRL2_RESERVED_3,
+	       HSUSB_REG_UGCTRL2);
+	/* low power status */
+	setbits_le16(HSUSB_REG_LPSTS, HSUSB_REG_LPSTS_SUSPM_NORMAL);
+
+	return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+	unsigned long midr, cputype;
+
+	asm volatile("mrs %0, midr_el1" : "=r" (midr));
+	cputype = (midr >> 4) & 0xfff;
+
+	if (cputype == 0xd03)
+		writel(RST_CA53_CODE, RST_CA53RESCNT);
+	else
+		writel(RST_CA57_CODE, RST_CA57RESCNT);
+}
+
+#if defined(CONFIG_MULTI_DTB_FIT)
+int board_fit_config_name_match(const char *name)
+{
+	const u32 soc_id = (readl(PRR_REGISTER) & 0x00007F00) >> 8;
+
+	if (soc_id == SOC_ID_R8A774A1 &&
+	    !strcmp(name, "r8a774a1-hihope-rzg2m-u-boot"))
+		return 0;
+
+	return -1;
+}
+#endif
diff --git a/configs/hihope_rzg2_defconfig b/configs/hihope_rzg2_defconfig
new file mode 100644
index 0000000000..ec57ff8e8c
--- /dev/null
+++ b/configs/hihope_rzg2_defconfig
@@ -0,0 +1,77 @@
+CONFIG_ARM=y
+CONFIG_ARCH_CPU_INIT=y
+CONFIG_ARCH_RMOBILE=y
+CONFIG_SYS_TEXT_BASE=0x50000000
+CONFIG_ENV_SIZE=0x20000
+CONFIG_ENV_OFFSET=0xFFFE0000
+CONFIG_DM_GPIO=y
+CONFIG_GPIO_HOG=y
+CONFIG_RCAR_GEN3=y
+CONFIG_TARGET_HIHOPE_RZG2=y
+# CONFIG_BOARD_EARLY_INIT_F is not set
+# CONFIG_SPL is not set
+CONFIG_SOC_DEVICE=y
+CONFIG_SOC_DEVICE_RENESAS=y
+CONFIG_DEFAULT_DEVICE_TREE="r8a774a1-hihope-rzg2m-u-boot"
+CONFIG_SMBIOS_PRODUCT_NAME=""
+CONFIG_FIT=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=192.168.0.1:/export/rfs ip=192.168.0.20"
+CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_DEFAULT_FDT_FILE="r8a774a1-hihope-rzg2m.dtb"
+CONFIG_VERSION_VARIABLE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_LIST="r8a774a1-hihope-rzg2m-u-boot"
+CONFIG_MULTI_DTB_FIT_LZO=y
+CONFIG_MULTI_DTB_FIT_USER_DEFINED_AREA=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_DEV=1
+CONFIG_SYS_MMC_ENV_PART=2
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_CLK=y
+CONFIG_CLK_RENESAS=y
+CONFIG_RCAR_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_RCAR_I2C=y
+CONFIG_SYS_I2C_RCAR_IIC=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_RENESAS_SDHI=y
+CONFIG_BITBANGMII=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_RENESAS_RAVB=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_SCIF_CONSOLE=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_STORAGE=y
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SMBIOS_MANUFACTURER=""
diff --git a/include/configs/hihope-rzg2.h b/include/configs/hihope-rzg2.h
new file mode 100644
index 0000000000..68a51176e3
--- /dev/null
+++ b/include/configs/hihope-rzg2.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * include/configs/hihope-rzg2.h
+ *     This file is HOPERUN HiHope RZ/G2 board configuration.
+ *
+ * Copyright (C) 2020 Renesas Electronics Corporation
+ */
+
+#ifndef __HIHOPE_RZG2_H
+#define __HIHOPE_RZG2_H
+
+#include "rcar-gen3-common.h"
+
+/* Ethernet RAVB */
+#define CONFIG_BITBANGMII_MULTI
+
+/* Generic Timer Definitions (use in assembler source) */
+#define COUNTER_FREQUENCY	0xFE502A	/* 16.66MHz from CPclk */
+
+#endif /* __HIHOPE_RZG2_H */
-- 
2.17.1



More information about the U-Boot mailing list