Fixing LicheePi Zero isn't working

Tan Xiaofan xfan1024 at live.com
Fri Nov 27 21:37:11 CET 2020


Hi

I compile the master branch u-boot for LicheePi Zero, 
it's not working.I'm trying to fix the the issue, it's working 
but ugly now.

I didn't figure out why the sunxi_spi_probe function in  
drivers/spi/sunxi_spi.c was not called automatically.  
Finally, I add code to probe all spi device manually.

My patch is shown below, what's the correct way to fix it?

 
diff --git a/arch/arm/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/dts/sun8i-v3s-licheepi-zero.dts
index 2e4587d26c..3a1abaa53a 100644
--- a/arch/arm/dts/sun8i-v3s-licheepi-zero.dts
+++ b/arch/arm/dts/sun8i-v3s-licheepi-zero.dts
@@ -99,3 +99,7 @@
 	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
+
+&spi0 {
+	status = "okay";
+};
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 49ef217f08..7f89e5da44 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -993,7 +993,7 @@ config SPL_STACK_R_ADDR
 
 config SPL_SPI_SUNXI
 	bool "Support for SPI Flash on Allwinner SoCs in SPL"
-	depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 || MACH_SUN50I_H6
+	depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 || MACH_SUN50I_H6 || MACH_SUN8I_V3S
 	help
 	  Enable support for SPI Flash. This option allows SPL to read from
 	  sunxi SPI Flash. It uses the same method as the boot ROM, so does
diff --git a/cmd/sf.c b/cmd/sf.c
index c0d6a8f8a0..b98a4ac0bf 100644
--- a/cmd/sf.c
+++ b/cmd/sf.c
@@ -83,6 +83,20 @@ static ulong bytes_per_second(unsigned int len, ulong start_ms)
 		return 1024 * len / max(get_timer(start_ms), 1UL);
 }
 
+static void spi_probe(void)
+{
+	struct uclass *uc;
+	struct udevice *dev;
+
+	int ret = uclass_get(UCLASS_SPI, &uc);
+	if (ret)
+		return;
+
+	uclass_foreach_dev(dev, uc) {
+		device_probe(dev);
+	}
+}
+
 static int do_spi_flash_probe(int argc, char *const argv[])
 {
 	unsigned int bus = CONFIG_SF_DEFAULT_BUS;
@@ -124,6 +138,8 @@ static int do_spi_flash_probe(int argc, char *const argv[])
 			return -1;
 	}
 
+	spi_probe();
+
 #if CONFIG_IS_ENABLED(DM_SPI_FLASH)
 	/* Remove the old device, otherwise probe will just be a nop */
 	ret = spi_find_bus_and_cs(bus, cs, &bus_dev, &new);
diff --git a/configs/LicheePi_Zero_defconfig b/configs/LicheePi_Zero_defconfig
index 04d7b64504..42cdb25899 100644
--- a/configs/LicheePi_Zero_defconfig
+++ b/configs/LicheePi_Zero_defconfig
@@ -3,5 +3,9 @@ CONFIG_ARCH_SUNXI=y
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_V3S=y
 CONFIG_DRAM_CLK=360
+CONFIG_SPL_SPI_SUNXI=y
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-v3s-licheepi-zero"
-# CONFIG_NETDEVICES is not set
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y



More information about the U-Boot mailing list