[PATCH v3] xilinx: Kconfig: add XILINX_OF_BOARD_DTB_ADDR default value for microblaze

[Michal Simek]

On 12/2/21 20:56, Ovidiu Panait wrote:
> The xilinx board_fdt_blob_setup() implementation makes use of
> XILINX_OF_BOARD_DTB_ADDR, but no default value is currently defined for
> microblaze. Add one so that microblaze could also work with
> CONFIG_OF_SEPARATE.
> 
> Signed-off-by: Ovidiu Panait <ovidiu.panait at windriver.com>
> ---
> 
>   board/xilinx/Kconfig | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/board/xilinx/Kconfig b/board/xilinx/Kconfig
> index 64507b5d84..1788066173 100644
> --- a/board/xilinx/Kconfig
> +++ b/board/xilinx/Kconfig
> @@ -43,6 +43,7 @@ endif
>   config XILINX_OF_BOARD_DTB_ADDR
>   	hex "Default DTB pickup address"
>   	default 0x1000 if ARCH_VERSAL
> +	default 0x8000 if MICROBLAZE
>   	default 0x100000 if ARCH_ZYNQ || ARCH_ZYNQMP
>   	depends on OF_BOARD || OF_SEPARATE
>   	help
> 

Applied.
M

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs