[PATCH] imx8mq_evk: switch board to use binman for images
Andrey Zhizhikin
andrey.zhizhikin at leica-geosystems.com
Fri Dec 3 16:29:38 CET 2021
Currently i.MX8MQ EVK board still targeting the old image generation
approach for image generation, which relies on the FIT generator that
has been dropped from the tree.
Switch the board to use binman instead, which is a standard image
generator now.
Update board documentation to correct build command, and advise latest
firmware and TF-A versions to use.
NOTE: New image produced by binman does not have Signed HDMI FW support,
this has been left on the side and does not interfere with the general
boot flow.
Tested on: [i.MX8MQ rev2.0]
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin at leica-geosystems.com>
---
arch/arm/dts/imx8mq-evk-u-boot.dtsi | 107 ++++++++++++++++++
arch/arm/mach-imx/imx8m/Kconfig | 1 +
board/freescale/imx8mq_evk/Kconfig | 2 +-
.../imx8mq_evk/imximage-8mq-lpddr4.cfg | 9 ++
configs/imx8mq_evk_defconfig | 2 +-
doc/board/nxp/imx8mq_evk.rst | 24 ++--
6 files changed, 133 insertions(+), 12 deletions(-)
create mode 100644 board/freescale/imx8mq_evk/imximage-8mq-lpddr4.cfg
diff --git a/arch/arm/dts/imx8mq-evk-u-boot.dtsi b/arch/arm/dts/imx8mq-evk-u-boot.dtsi
index 2cfc12b7e0..a602ae55eb 100644
--- a/arch/arm/dts/imx8mq-evk-u-boot.dtsi
+++ b/arch/arm/dts/imx8mq-evk-u-boot.dtsi
@@ -1,5 +1,112 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/ {
+ binman: binman {
+ multiple-images;
+ };
+};
+
+&binman {
+ u-boot-spl-ddr {
+ filename = "u-boot-spl-ddr.bin";
+ pad-byte = <0xff>;
+ align-size = <4>;
+ align = <4>;
+
+ u-boot-spl {
+ align-end = <4>;
+ };
+
+ blob_1: blob-ext at 1 {
+ filename = "lpddr4_pmu_train_1d_imem.bin";
+ size = <0x8000>;
+ };
+
+ blob_2: blob-ext at 2 {
+ filename = "lpddr4_pmu_train_1d_dmem.bin";
+ size = <0x4000>;
+ };
+
+ blob_3: blob-ext at 3 {
+ filename = "lpddr4_pmu_train_2d_imem.bin";
+ size = <0x8000>;
+ };
+
+ blob_4: blob-ext at 4 {
+ filename = "lpddr4_pmu_train_2d_dmem.bin";
+ size = <0x4000>;
+ };
+ };
+
+ flash {
+ mkimage {
+ args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x7e1000";
+
+ blob {
+ filename = "u-boot-spl-ddr.bin";
+ };
+ };
+ };
+
+ itb {
+ filename = "u-boot.itb";
+
+ fit {
+ description = "Configuration to load ATF before U-Boot";
+ #address-cells = <1>;
+ fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+
+ images {
+ uboot {
+ description = "U-Boot (64-bit)";
+ type = "standalone";
+ arch = "arm64";
+ compression = "none";
+ load = <CONFIG_SYS_TEXT_BASE>;
+
+ uboot_blob: blob-ext {
+ filename = "u-boot-nodtb.bin";
+ };
+ };
+
+ atf {
+ description = "ARM Trusted Firmware";
+ type = "firmware";
+ arch = "arm64";
+ compression = "none";
+ load = <0x910000>;
+ entry = <0x910000>;
+
+ atf_blob: blob-ext {
+ filename = "bl31.bin";
+ };
+ };
+
+ fdt {
+ description = "NAME";
+ type = "flat_dt";
+ compression = "none";
+
+ uboot_fdt_blob: blob-ext {
+ filename = "u-boot.dtb";
+ };
+ };
+ };
+
+ configurations {
+ default = "conf";
+
+ conf {
+ description = "NAME";
+ firmware = "uboot";
+ loadables = "atf";
+ fdt = "fdt";
+ };
+ };
+ };
+ };
+};
+
&usdhc1 {
mmc-hs400-1_8v;
};
diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
index 276b8bd974..c556e712b7 100644
--- a/arch/arm/mach-imx/imx8m/Kconfig
+++ b/arch/arm/mach-imx/imx8m/Kconfig
@@ -36,6 +36,7 @@ config TARGET_IMX8MQ_CM
config TARGET_IMX8MQ_EVK
bool "imx8mq_evk"
+ select BINMAN
select IMX8MQ
select IMX8M_LPDDR4
diff --git a/board/freescale/imx8mq_evk/Kconfig b/board/freescale/imx8mq_evk/Kconfig
index c4d20ad7c7..08f937f74f 100644
--- a/board/freescale/imx8mq_evk/Kconfig
+++ b/board/freescale/imx8mq_evk/Kconfig
@@ -10,6 +10,6 @@ config SYS_CONFIG_NAME
default "imx8mq_evk"
config IMX_CONFIG
- default "arch/arm/mach-imx/imx8m/imximage.cfg"
+ default "board/freescale/imx8mq_evk/imximage-8mq-lpddr4.cfg"
endif
diff --git a/board/freescale/imx8mq_evk/imximage-8mq-lpddr4.cfg b/board/freescale/imx8mq_evk/imximage-8mq-lpddr4.cfg
new file mode 100644
index 0000000000..b89092a559
--- /dev/null
+++ b/board/freescale/imx8mq_evk/imximage-8mq-lpddr4.cfg
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2021 NXP
+ */
+
+#define __ASSEMBLY__
+
+BOOT_FROM sd
+LOADER mkimage.flash.mkimage 0x7E1000
diff --git a/configs/imx8mq_evk_defconfig b/configs/imx8mq_evk_defconfig
index 92aae70d4a..f82ce63281 100644
--- a/configs/imx8mq_evk_defconfig
+++ b/configs/imx8mq_evk_defconfig
@@ -24,7 +24,7 @@ CONFIG_SYS_LOAD_ADDR=0x40480000
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_BOARD_INIT=y
diff --git a/doc/board/nxp/imx8mq_evk.rst b/doc/board/nxp/imx8mq_evk.rst
index c269fdebe3..d2dc611206 100644
--- a/doc/board/nxp/imx8mq_evk.rst
+++ b/doc/board/nxp/imx8mq_evk.rst
@@ -9,7 +9,7 @@ Quick Start
-----------
- Build the ARM Trusted firmware binary
-- Get ddr and hdmi fimware
+- Obtain DDR firmware from NXP website
- Build U-Boot
- Boot
@@ -18,7 +18,8 @@ Get and Build the ARM Trusted firmware
Note: srctree is U-Boot source directory
Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
-branch: imx_5.4.47_2.2.0
+branch: lf_v2.4
+Tag: lf-5.10.52-2.1.0
.. code-block:: bash
@@ -30,11 +31,10 @@ Get the ddr and hdmi firmware
.. code-block:: bash
- $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin
- $ chmod +x firmware-imx-8.9.bin
- $ ./firmware-imx-8.9.bin
- $ cp firmware-imx-8.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(builddir)
- $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.13.bin
+ $ chmod +x firmware-imx-8.13.bin
+ $ ./firmware-imx-8.13.bin
+ $ cp firmware-imx-8.13/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
Build U-Boot
------------
@@ -43,14 +43,18 @@ Build U-Boot
$ export CROSS_COMPILE=aarch64-poky-linux-
$ make imx8mq_evk_defconfig
- $ make flash.bin
+ $ export ATF_LOAD_ADDR=0x910000
+ $ make
-Burn the flash.bin to MicroSD card offset 33KB:
+Burn the flash.bin (offset 33KB) and u-boot.itb (offset 384KB) to MicroSD card:
.. code-block:: bash
$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 conv=notrunc
+ $sudo dd if=u-boot.itb of=/dev/sd[x] bs=1024 seek=384 conv=notrunc
Boot
----
-Set Boot switch SW801: 1100 and Bmode: 10 to boot from Micro SD.
+Set Boot switches to boot from Micro SD:
+SW801: 1100
+SW802: 10
base-commit: 5b9ee01685290653671072d0030cd7ba9da3a705
--
2.25.1
More information about the U-Boot
mailing list