[PATCH v6 00/25] fdt: Make OF_BOARD a boolean option

Tom Rini trini at konsulko.com
Sun Dec 5 14:32:14 CET 2021


On Sat, Dec 04, 2021 at 07:52:46PM +0100, François Ozog wrote:
> Hi Simon
> 
> Le sam. 4 déc. 2021 à 18:35, Simon Glass <sjg at chromium.org> a écrit :
> 
> > Hi François,
> >
> > On Sat, 4 Dec 2021 at 09:55, François Ozog <francois.ozog at linaro.org>
> > wrote:
> > >
> > > Hi Simon
> > >
> > > Le sam. 4 déc. 2021 à 16:21, Simon Glass <sjg at chromium.org> a écrit :
> > >>
> > >> Hi Tom,
> > >>
> > >> On Sat, 4 Dec 2021 at 06:52, Tom Rini <trini at konsulko.com> wrote:
> > >> >
> > >> > On Fri, Dec 03, 2021 at 06:01:56PM -0700, Simon Glass wrote:
> > >> >
> > >> > [huge snip]
> > >> > > > There's things that need to be cleaned up because we have some
> > small
> > >> > > > number of platforms that went off and did their own thing.  But
> > largely
> > >> > > > yes, things make sense to me.  We have:
> > >> > > > - We embedded the device tree that will configure U-Boot, because
> > there
> > >> > > >   is no way for the hardware to have provided us one.
> > >> > > > - We do not embed the device tree that will configure U-Boot,
> > because
> > >> > > >   there is already one present in memory for us to use.
> > >> > > >
> > >> > > > Then we have the developer option of:
> > >> > > > - We embedded the device tree that will configure U-Boot, because
> > we're
> > >> > > >   developing something.
> > >> > >
> > >> > > Yes, agreed those are the cases. To me this needs to be a run-time
> > choice.
> > >> >
> > >> > But it's not possible.  That's the problem we keep going around and
> > >> > around about.  People keep raising real life examples where you cannot
> > >> > make a run time choice between "device tree we're passed at run time"
> > >> > and "device tree we're compiled with".
> > >>
> > >> I haven't seen one. The most extreme case is QEMU and it works fine. I
> > >> even added a test with it. What am I missing?
> > >>
> > >> >
> > >> > And it's not helpful.  It is ALWAYS the case that we know that we want
> > >> > to override the run time device tree with our own, because it's a
> > >> > developer developing things or it's a user / production case where we
> > >> > must use the provided tree.  NOT doing that is what leads to madness
> > >> > like we see for example on Pi where if we don't use the passed tree we
> > >> > still need to copy X/Y/Z out of it.
> > >>
> > >> Aren't you talking about the distro DT there, rather than the the one
> > >> on the boot disk? That is my reading of that patch. If we need to do
> > >> that sort of thing, it doesn't matter where the the cointrol DT comes
> > >> from. You are still going to have to do that sort of thing.
> > >>
> > >> It is not ALWAYS the case. I've shown you how easy it is to disable
> > >> OF_BOARD and still boot / iterate.
> > >>
> > >> >
> > >> > > > > Are you looking to have an empty DT in u-boot.bin? Perhaps we
> > should
> > >> > > > > provide a way to do that? But what is driving that desire?
> > >> > > >
> > >> > > > I'm looking for ways to convince you that we do not need to
> > include a
> > >> > > > device tree in the binary.  There's a growing set of devices
> > where the
> > >> > > > device tree exists with the device.  If it's missing, that's a
> > huge
> > >> > > > fatal error we can't do all that much about.  If we need to do
> > something
> > >> > > > to that device tree for U-Boot, yes, fine, we should make it
> > straight
> > >> > > > forward for the developer to do that.  But that's not the common
> > case!
> > >> > >
> > >> > > Well we could add another Kconfig which tells U-Boot not to include
> > a
> > >> > > devicetree in u-boot.bin, if that would resolve this?
> > >> > >
> > >> > > I just want to make sure that we always build the devicetrees and
> > that
> > >> > > it is easy for a knowledgeable dev to switch over to use them,
> > without
> > >> > > spelunking through dozens of other projects to discover the secret
> > DT
> > >> > > that no one will tell us about.
> > >> >
> > >> > Should we demand better documentation for boards?  Yes.  But it's
> > still
> > >> > a valid case to have zero device trees for a given platform in-tree.
> > >> > Xen is an example of this.  QEMU is an example of this.  Platforms
> > need
> > >> > to work without adding special tweaks for us.  Maybe that means some
> > >> > features can't be tested in QEMU-as-virtual-platform and only in
> > >> > QEMU-faithfully-emulating-specific-physical-platforms.
> > >>
> > >> You mention QEMU (for ARM and RISC-V) and now XEN. They are a special
> > >> case, I think. How about we create a special Kconfig for that case? We
> > >> need to make some progress here.
> > >>
> > >> >
> > >> > > > I guess another part of the problem is that historically almost
> > all
> > >> > > > platforms were in the first case I list above, no run time
> > provided
> > >> > > > device tree, so we took the kernel one and added our bindings to
> > it.
> > >> > > > Now we're being bit by the growing number of platforms that are
> > the
> > >> > > > second case, and how do we get our properties in there, and which
> > ones
> > >> > > > even make sense to do that for.
> > >> > >
> > >> > > I think upstreaming the bindings is the solution there. I've made a
> > >> > > start, but we need to make progress with this series and all the
> > other
> > >> > > things in flight. I think a lot of people want U-Boot to not have a
> > >> > > devicetree source files in it for ARMv8 platforms. I am strongly
> > >> > > opposed to that. I've laid out my reasons very clearly in the past.
> > I
> > >> > > think this is a good summary:
> > >> > >
> > >> > > https://lists.gnu.org/archive/html/qemu-devel/2021-10/msg03480.html
> > >> >
> > >> > Yes, there are some ARMv8 platforms we will have to have the source
> > >> > files to, in tree, because they won't come to us at run time.  But
> > >> > others we won't for practical reasons, namely that we can't statically
> > >> > provide something that exists dynamically without massive duplication
> > of
> > >> > code or just taking things from that passed to us tree.
> > >>
> > >> So let's require that the static ones have the Linux DT in our tree
> > >> for now. The dynamic ones are just QEMU for ARM and Xen, I think. If
> > >> that's it then I can agree a special case for them, so long as we sort
> > >> out the docs for Xen.
> > >>
> > >> >
> > >> > > I believe I have been consistent in this although with all the
> > >> > > discussion I'm really not sure anymore.
> > >> >
> > >> > Yes, everyone has been consistent in these discussions.
> > >>
> > >> I'd like to think more people accept that U-Boot is allowed its own
> > >> properties than did at the start.
> > >
> > > there is no question that U-Boot can have its properties specified in
> > Device Tree.
> >
> > I am pretty sure you were on the other side of that fence at some
> > point. I know quite a few others that still are.
> >
> > > What we may not agree in is how those properties make it to U-Boot.
> >
> > Yes but that is just the next step along in my progression in that
> > email ('why can't we just...' to 'this is how U-Boot works'). From
> > memory there are 3 more steps.
> >
> > >>
> > >>
> > >>
> > >> >
> > >> > > The problem is that various people have various views about how
> > U-Boot
> > >> > > should work with devicetree. I strongly believe that until we have
> > >> > > bindings upstream, a central repo for DTs with easy downloading for
> > >> > > builds, automated validation, among other things, we must maintain
> > the
> > >> > > devicetree in U-Boot. Just from the POV of energy expended, I do not
> > >> > > want to be arguing with the Linaro folks about what U-Boot is
> > allowed
> > >> > > to do every month for the next two years. I'd rather set out the
> > stall
> > >> > > now and then deal with the problems it causes from that perspective.
> > >> >
> > >> > The problems of the last going on 12 years won't be solved instantly.
> > >> > The conflict as I see it is that you're insisting that all platforms
> > >> > must have statically usable device trees, and I (and I believe others)
> > >> > are saying that's unreasonable in cases where the trees are dynamic at
> > >> > heart, lets just ensure we have good enough documentation for them,
> > >> > which we don't today.
> > >> >
> > >> > To be clear and pick an example, I don't want Pi dts files in U-Boot,
> > >> > but, OK, it's an easy enough case to sync them up and so long as we
> > >> > aren't yet at the "now we pick at run time between compiled in or
> > passed
> > >> > to us dtb", I can accept them in tree, but not in the resulting binary
> > >> > for OF_CONTROL=y.  But as the Xen folks have also noted, there's no
> > >> > reasonable tree to include there.  It does need to be better
> > documented
> > >> > how to fire it up however, in our sources.
> > >>
> > >> I'm OK with us copying in the Linux devicetree and using that. But
> > >> OF_BOARD must be a run-time option and able to be disabled. The
> > >> devicetree must be built, so it is actually real. We can have a
> > >> separate OF_OMIT or something like that to omit the devicetree from
> > >> the output image, perhaps.
> > >>
> > >> All of the other things need to wait until we make progress with
> > >> devicetree bindings, validation,
> > >>
> > >> How can we make progress on this? We have different goals, as I have
> > >> explained, so we are not going to agree on everything.
> > >
> > > A V7 with empty device trees (except with comments to explain why they
> > are empty and how to force one for dev purposes) for platforms that provide
> > U-Boot with DT (RPI, Qemu, xen…) seem a good base unless someone can
> > propose a better way forward. If we build consensus on the feature aspect
> > of the patch set I will be able to dedicate some time on the documentation
> > part as I thought it was useless to check those until we agree on the
> > functional part.
> >
> > That's the status quo, so it doesn't resolve any of my concerns,
> > sorry. I suggest:
> >
> You make progress on various front that can get consensus in a number of
> your patches, so it it not status quo.
> 
> >
> > - Check in all the DTs we can get (e.g. from Linux), and build them
> 
> doesn’t change anytime. RPI4 DT in the kernel is not be used anyways.

Well, the kernel DTS files for Pi are, and aren't exactly used, yes?
The dtbs are built from the kernel, then passed to the Pi firmware and
updated based on config.txt and other relevant things, yes?

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20211205/4f3b9ee1/attachment.sig>


More information about the U-Boot mailing list