[PATCH v2] imx8mq_evk: switch board to use binman for images

Fabio Estevam festevam at gmail.com
Mon Dec 6 22:05:50 CET 2021


Hi Tom and Stefano,

On Fri, Dec 3, 2021 at 1:27 PM Fabio Estevam <festevam at gmail.com> wrote:
>
> Hi Andrey,
>
> On Fri, Dec 3, 2021 at 1:18 PM Andrey Zhizhikin
> <andrey.zhizhikin at leica-geosystems.com> wrote:
> >
> > Currently i.MX8MQ EVK board still targeting the old image generation
> > approach for image generation, which relies on the FIT generator that
> > has been dropped from the tree.
> >
> > Switch the board to use binman instead, which is a standard image
> > generator now.
> >
> > Update board documentation to correct build command, and advise latest
> > firmware and TF-A versions to use.
> >
> > NOTE: New image produced by binman does not have Signed HDMI FW support,
> > this has been left on the side and does not interfere with the general
> > boot flow.
> >
> > Tested on: [i.MX8MQ rev2.0]
> >
> > Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin at leica-geosystems.com>
> > ---
> >
> > Changes in V2:
> > - Modify binman and documentation to use single flash.bin file instead
> >   of flash.bin+u-boot.itb combination, suggested by Fabio Estevam.
>
> Thanks for the rework:
>
> Reviewed-by: Fabio Estevam <festevam at gmail.com>

Please consider this one for 2022.01.

Thanks


More information about the U-Boot mailing list